Date: Mon, 13 Mar 2006 17:20:32 +0000 From: Tofik Suleymanov <tofik@oxygen.az> To: Graham Bentley <gbentley@uk2.net> Cc: freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Anyone seen this scsi error before ? Message-ID: <4415A9E0.3090001@oxygen.az> In-Reply-To: <000701c6460e$3c5ea580$0807a8c0@admin> References: <000701c6460e$3c5ea580$0807a8c0@admin>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------030305050201090200020003 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may have changed > (sa0:ahc0:0:6:0): Unretryable error > > Anyone shed any light upon it ? > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > Hi, i've got similar (but not exact the same) problem with my SCSI controller on my freebsd box freshly installed with default options 9GENERIC kernel etc etc).Server model is HP DL 140.My 'uname -a' is: web# uname -a FreeBSD web.xxxxx.com 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Mon Feb 20 09:16:50 EST 2006 root@web.gltcall.com:/usr/obj/usr/src/sys/GENERIC i386 web# dmesg is attached.Any advice on what is happening ? Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc06e8 Timed out. Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bbf478 Timed out. Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc02d8 Timed out. Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc0080 Timed out. Mar 11 13:00:52 web kernel: mpt0: Attempting to Abort Req 0xc4bbfdd8 Mar 11 13:06:12 web kernel: mpt0: mpt_recover_commands: Abort timed-out.Resetting controller Mar 11 13:06:12 web kernel: mpt0: soft reset failed: ack timeout Mar 11 13:06:12 web kernel: mpt0: WARNING - Failed hard reset! Trying to initialize anyway. Mar 11 13:06:12 web kernel: mpt0: Unhandled Event Notify Frame. Event 0xc086250d. Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): WRITE(10). CDB: 2a 0 0 85 95 8f 0 0 20 0 Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): CAM Status: SCSI Status Error Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): SCSI Status: Check Condition Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): UNIT ATTENTION asc:29,2 Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): Scsi bus reset occurred Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): Retrying Command (per Sense Data) --------------030305050201090200020003 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-PRERELEASE #0: Mon Feb 20 09:16:50 EST 2006 root@web.gltcall.com:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2822.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE ,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=0x20100000<NX,LM> Hyperthreading: 2 logical CPUs real memory = 1073152000 (1023 MB) avail memory = 1041223680 (992 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 25 Entries> on motherboard pci0: <PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> irq 5 at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCIBIOS PCI-PCI bridge> irq 5 at device 4.0 on pci0 pci2: <PCI bus> on pcib2 bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xdd100000-0xdd10ffff irq 5 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:15:60:5f:66:fe pcib3: <PCIBIOS PCI-PCI bridge> irq 5 at device 5.0 on pci0 pci3: <PCI bus> on pcib3 bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xdd200000-0xdd20ffff irq 5 at device 0.0 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:15:60:5f:66:ff pcib4: <PCIBIOS PCI-PCI bridge> irq 5 at device 6.0 on pci0 pci4: <PCI bus> on pcib4 pcib5: <PCIBIOS PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 0.1 (no driver attached) pcib6: <PCIBIOS PCI-PCI bridge> at device 0.2 on pci4 pci6: <PCI bus> on pcib6 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0xdd420000-0xdd43ffff,0xdd400000-0xdd41ffff irq 5 at device 3.0 on pci6 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 mpt0: Unhandled Event Notify Frame. Event 0xa. pci4: <base peripheral, interrupt controller> at device 0.3 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 5 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 3 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdd001000-0xdd0013ff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci7: <PCI bus> on pcib7 pci7: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcefff,0xdc000-0xdffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) fdc1: No FDOUT register! Timecounter "TSC" frequency 2822508633 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle da0 at mpt0 bus 0 target 0 lun 0 da0: <COMPAQ BF03698578 HPB2> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) Trying to mount root from ufs:/dev/da0s1a bge0: link state changed to UP --------------030305050201090200020003--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4415A9E0.3090001>