Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 07 Feb 2008 10:07:04 -0600
From:      Derek Ragona <derek@computinginnovations.com>
To:        Eugen <eu9gu4@gmail.com>, freebsd-questions@freebsd.org
Cc:        OutBackDingo <outbackdingo@gmail.com>
Subject:   Re: Help with router problem
Message-ID:  <6.0.0.22.2.20080207100402.02503758@mail.computinginnovations.com>
In-Reply-To: <ccc92c8e0802061824j269d98e1v3dd83bbfb21caaaf@mail.gmail.co m>
References:  <ccc92c8e0802051724u3a473d6n9f10ba5b05539418@mail.gmail.com> <47A94275.608@daleco.biz> <ccc92c8e0802060540p2bd52acdsf3cc1b3ccf3d5edd@mail.gmail.com> <6.0.0.22.2.20080206082722.02510c78@mail.computinginnovations.com> <ccc92c8e0802061824j269d98e1v3dd83bbfb21caaaf@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
At 08:24 PM 2/6/2008, Eugen wrote:
>I tried everything you guys told me and it still doesn't work :
>
>- tried to set a static address as Derek indicated
>- commented out the ipv6 line in rc.conf, even if it was already set to "NO"
>- the answer to Kevin's questions follow:
>
># ping -I dc0 192.168.1.1
>ping: invalid multicast interface: `dc0'
>
># arp -a
>? (192.168.1.1) at (incomplete) on dc0 [ethernet]
>
># ifconfig -a
>dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=8<VLAN_MTU>
>         ether 00:14:cf:52:b4:17
>         inet 192.168.1.33 netmask 0xffffff00 broadcast 192.168.1.255
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>         inet6 ::1 prefixlen 128
>         inet 127.0.0.1 netmask 0xff000000
>
>ping 192.168.1.1 and traceroute 192.168.1.1 give "Network is unreachable"
>
>I even connected directly to the cable modem as it was before I bought the
>router and... surprise: it works! Put the router back and BSD stops working
>again. I'm writing this post from Linux, so this one works.

When it is connected directly to the router, what IP are you using 
then?  Can you post your
ifconfig -a
output then, and when it is connected to the router.

What router are you using?  How do you have it set-up?  What are the IP 
settings for the router?  What are the DHCP settings?  Can the router ping 
itself or other hosts?

         -Derek




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20080207100402.02503758>