Date: Sun, 4 Mar 2007 10:13:37 -0700 From: Aaron Siegel <bulk_mail@siegel-tech.net> To: freebsd-questions@freebsd.org Subject: Sony DRU-820A DVD-RW RAM Drive Message-ID: <200703041013.38470.bulk_mail@siegel-tech.net>
next in thread | raw e-mail | index | archive | help
Hello Cannot read or play audio cdrom disks. run the Windows install for Win4BSD the install worked worked with a standard cdrom drive Can burn CD-R (with cdrecord dev=1,0,0) burn DVD-RW (with mkisofs) play Movie dvds. read dvd disks read data cdrom disks I am using 6.1 Release. /boot/loader.conf atapicam_load="YES" hw.ata.ata_dma="1" hw.ata.atapi_dma="1" I have set the mode for the device to UDMA33 from UDMA66. How can I set this up so the drive boots as UDMA33? Do I add the following line into the device.hints: hint.cd.0.mode="UDMA33"? acd0: DVDR <DVD RW DRU-820A/1.0b> at ata1-master UDMA66 cd0 at ata1 bus 0 target 0 lun 0 cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers I am receiving a following errors while booting cd0: cd present [309837 x 2048 byte records] (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error (cd0:ata1:0:0:0): SCSI Status: Check Condition (cd0:ata1:0:0:0): ILLEGAL REQUEST csi:0,0,21,0 asc:64,0 (cd0:ata1:0:0:0): Illegal mode for this track (cd0:ata1:0:0:0): Unretryable error (cd0:ata1:0:0:0): cddone: got error 0x6 back The errors when playing a DVD (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 12 fb 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error (cd0:ata1:0:0:0): SCSI Status: Check Condition (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair (cd0:ata1:0:0:0): Unretryable error (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 13 4e 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error (cd0:ata1:0:0:0): SCSI Status: Check Condition (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair (cd0:ata1:0:0:0): Unretryable error (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 45 f0 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error (cd0:ata1:0:0:0): SCSI Status: Check Condition (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair (cd0:ata1:0:0:0): Unretryable error (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 9e 34 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error (cd0:ata1:0:0:0): SCSI Status: Check Condition (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair (cd0:ata1:0:0:0): Unretryable error Thank you Aaron
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200703041013.38470.bulk_mail>