Date: Wed, 12 Nov 2014 18:11:23 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-net@FreeBSD.org Subject: [Bug 165463] FreeBSD doesn't work with NIC based on RLT8111E Message-ID: <bug-165463-2472-IX0ALZJ0cl@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-165463-2472@https.bugs.freebsd.org/bugzilla/> References: <bug-165463-2472@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=165463 john@jnielsen.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |john@jnielsen.net --- Comment #4 from john@jnielsen.net --- Can the reporter provide any additional details? The version of FreeBSD tried and the relevant output from "dmesg" and "pciconf -lv" would be a good start. I have a FreeBSD box with an onboard RTL8111E and it works fine with the re(4) driver: re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfea00000-0xfea00fff,0xfc800000-0xfc803fff irq 32 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 74:27:ea:d5:89:83 re0@pci0:1:0:0: class=0x020000 card=0x81161019 chip=0x816810ec rev=0x0c hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet The board is this one: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1499&CategoryID=1&DetailName=Feature&MenuID=106&LanID=0 It is worth noting that while the NIC was identified and the driver attached in FreeBSD 10.0, It was not fully functional until 10.0-STABLE (and upcoming 10.1). -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-165463-2472-IX0ALZJ0cl>