Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Jul 2007 17:39:18 -0700 (PDT)
From:      chris@chrismaness.com
To:        youshi10@u.washington.edu
Cc:        Chris Maness <chris@chrismaness.com>, freebsd-questions@freebsd.org
Subject:   Re: Abit VP6 Mother Board no USB
Message-ID:  <1075.76.238.148.150.1185583158.squirrel@squirrel.kq6up.org>
In-Reply-To: <Pine.LNX.4.43.0707271622051.2643@hymn05.u.washington.edu>
References:  <Pine.LNX.4.43.0707271622051.2643@hymn05.u.washington.edu>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
> On Fri, 27 Jul 2007, Chris Maness wrote:
>
>> I moved a hard drive from a system that had working usb to an abit VP6
>> PIII
>> board, and FreeBSD is complaining that it can't find the USB host
>> controller.
>> Any suggestions?
>>
>> Chris Maness
>
> 1. Check that the BIOS a) has USB support turned on, b) has PnP support
> properly setup (ASUS for instance has a non-PnP capable USB setting where
> the BIOS arbitrates USB usage and resource configuration, but since
> FreeBSD is PnP capable I turn that option off).
> 2. Make sure that you have correct USB support compiled into your kernel
> (just compile in ehci, ohci, and uhci in case).
> 3. Try a 7-CURRENT snapshot disk and see if USB support works or not.
>
>       More information would be helpful as well if those suggestions don't
> work (what version of FreeBSD are you running, exact motherboard
> specs, etc).
> Thanks,
> -Garrett
>
>
I am such a retard.  I took your advice and scanned through the BIOS, and
I saw where USB needed to enabled.  That is wierd that USB is turned off
by default.  I had to reset the CMOS after changing a battery.

Thanks,
Chris Maness




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?1075.76.238.148.150.1185583158.squirrel>