Date: Tue, 10 Feb 1998 06:54:19 -0500 (EST) From: The Hermit Hacker <scrappy@hub.org> To: Wolfgang Helbig <helbig@Informatik.BA-Stuttgart.DE> Cc: sos@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: ACER CD910E/JAS IDE CDrom... Message-ID: <Pine.NEB.3.95.980210065343.27554C-100000@hub.org> In-Reply-To: <199802100853.JAA00421@rvc1.informatik.ba-stuttgart.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 10 Feb 1998, Wolfgang Helbig wrote: > > In reply to The Hermit Hacker who wrote: > > > > The problem is the '#' in front of all the lines in the section > > "I had", you have effectively disabled any ata/atapi support :) > > Or is this not an _exact_ copy of your config... > > > > The CMD640 might very well be the help you needed... > > In fact, it shouldn't, since only one IDE controller is defined. > In that case the code shouldn't be changed by the CMD640 option. > > Wolfgang > > > > Actually, not really the answer, but I did get it to work. I > > > ended up downloading the boot.flp from the latest snapshot, then when that > > > worked, building a GENERIC kernel...and when that worked, copied in > > > anything that appeared pertinent...and now it works. > > > > > > I had: > > > > > > #controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x00ffa004 > > You need to define an IDE controller to use an ATAPI CDROM. > > > > vector wdintr > > > #disk wd0 at wdc0 drive 0 > > > #disk wd1 at wdc0 drive 1 > > > #options ATAPI #Enable ATAPI support for IDE bus > > > #options ATAPI_STATIC #Don't do it as an LKM > > And you need to define ATAPI options. Actually, I did, in both cases...I cut and paste from my current config, where I had the above enabled, and blow disabled... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.95.980210065343.27554C-100000>