Date: Sun, 30 Sep 2007 10:46:36 -0700 From: Eric Osterweil <eoster@CS.UCLA.EDU> To: "Brian A. Seklecki" <lavalamp@spiritual-machines.org> Cc: freebsd-questions@freebsd.org Subject: Re: 6.2 amd64 ufs_dirbad Message-ID: <E3BFC39A-53EB-407C-80ED-1776A501F1F5@CS.UCLA.EDU> In-Reply-To: <1191100566.5997.12.camel@new-host.home> References: <DE98FB12-C32F-4A21-A9A6-2AE3F786BF1B@CS.UCLA.EDU> <1191100566.5997.12.camel@new-host.home>
next in thread | previous in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --Apple-Mail-2-266315551 Content-Type: multipart/mixed; boundary=Apple-Mail-1-266315331 --Apple-Mail-1-266315331 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed On Sep 29, 2007, at 2:16 PM, Brian A. Seklecki wrote: > Can you post your dmesg(8) from /var/run/dmesg(8) so that we can see > your SATA controller information? > > Can you try loading /usr/obj and /usr/src onto an alternate disk to > see > if the problem is controller/HBA/sata cable/disk related? > Attached, thnx in advance, --Apple-Mail-1-266315331 Content-Transfer-Encoding: 7bit Content-Type: application/octet-stream; x-unix-mode=0644; name=dmesg.boot Content-Disposition: attachment; filename=dmesg.boot Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Fri Sep 28 13:34:30 PDT 2007 root@iron.cs.ucla.edu:/usr/obj/usr/src/sys/IRON_SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 246 (1992.28-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> real memory = 4227792896 (4031 MB) avail memory = 4080902144 (3891 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib1 ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 19 at device 0.0 on pci3 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfeafd000-0xfeafdfff irq 19 at device 0.1 on pci3 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiI 3114 SATA150 controller> port 0xbc00-0xbc07,0xb480-0xb483,0xb400-0xb407,0xb080-0xb083,0xb000-0xb00f mem 0xfeafec00-0xfeafefff irq 1 7 at device 5.0 on pci3 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 pci3: <display, VGA> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 7.2 (no driver attached) pci0: <bridge> at device 7.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5704 A3, ASIC rev. 0x2003> mem 0xfc8c0000-0xfc8cffff,0xfc8b0000-0xfc8bffff irq 24 at device 9.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:e0:81:29:39:72 bge1: <Broadcom BCM5704 A3, ASIC rev. 0x2003> mem 0xfc8f0000-0xfc8fffff,0xfc8e0000-0xfc8effff irq 25 at device 9.1 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:e0:81:29:39:73 pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci1: <ACPI PCI bus> on pcib3 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 DocumentationDocumentationDocumentatio0: <Parallel I/O> on ppbus0 acpi_hpet0: <High Precision Event Timer> iomem 0xfec01000-0xfec013ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 2000 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff,0xcc800-0xcdfff,0xce000-0xcf7ff,0xcf800-0xd07ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDROM <LTN526S/YS0N> at ata0-master UDMA33 ad4: 238475MB <HDS722525VLSA80 V36OA60A> at ata2-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a WARNING: / was not properly dismounted WARNING: /usr was not properly dismounted --Apple-Mail-1-266315331 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Eric > ~BAS > > On Fri, 2007-09-28 at 10:33 -0700, Eric Osterweil wrote: >> -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> >> >> I've been chasing my tail with a problem for a few days now and I'm >> about to throw in the towel. I have a Tyan Thunder K8SR w/ 2 >> amd64's, 6GB of mem, and a 250 GB SATA drive. >> >> I've been trying to get FreeBSD 6.2 amd64 on it. When I do the >> install, if I try to put the ports on, it reliably crashes with a >> ufs_dirbad. I can install w/o the ports. I found a ref to booting >> with: >> set hw.physmem="4G" >> and that gets me through (w/ the ports). >> >> When I buildworld, I eventually get the same ufs_dirbad. >> >> I have swapped out the drive and tried a new one (same problem). >> WHenever I reboot (at all) if I fsck I see lots of filesystem >> errors. I just did a memtest86 over night, and found no problems. >> >> Can anyone help me out here? I can provide any other info that would >> help. >> >> Thanks, >> >> Eric >> -----BEGIN PGP SIGNATURE----- >> Version: GnuPG v1.4.5 (Darwin) >> >> iD8DBQFG/Tr8K/tq6CJjZQIRAjwKAJ48hBPeFwnSBQaykw7rJsNW49Rt3wCeO0HY >> yxThKkuyCTPJOjfTw2KWsp4= >> =syDq >> -----END PGP SIGNATURE----- >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to "freebsd-questions- >> unsubscribe@freebsd.org" >> >> >> >> >> >> > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > unsubscribe@freebsd.org" --Apple-Mail-1-266315331-- --Apple-Mail-2-266315551 content-type: application/pgp-signature; x-mac-type=70674453; name=PGP.sig content-description: This is a digitally signed message part content-disposition: inline; filename=PGP.sig content-transfer-encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iD8DBQFG/+D8K/tq6CJjZQIRAhVlAJ4qHjCApdCbRXv21sjnxrxP/O/lRQCaArge 9wN5D7UiuxrlQPNhOmqaDrQ= =hDaX -----END PGP SIGNATURE----- --Apple-Mail-2-266315551--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E3BFC39A-53EB-407C-80ED-1776A501F1F5>