Date: Sat, 4 Aug 2001 20:57:46 +0200 (MET DST) From: Helge Oldach <helge.oldach@atosorigin.com> To: gibbs@scsiguy.com (Justin T. Gibbs) Subject: Re: Dell Poweredge 2450 vs. recent sys/dev/aic7xxx MFCs Message-ID: <200108042119.XAA20580@galaxy.de.cp.philips.com> In-Reply-To: <200108041524.f74FOpI05007@aslan.scsiguy.com> from "Justin T. Gibbs" at "Aug 4, 2001 9:24:51 am"
next in thread | previous in thread | raw e-mail | index | archive | help
--ELM996951466-20131-0_
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Justin,
>>I will grab the console output during the timeouts if that helps.
>>Justin, please let me know what exactly you need.
>Yes, that is exactly what I need. Please be quick.
OK. Here we go.
First, the dmesg diff between the old and new kernel is this:
4c4
< FreeBSD 4.4-PRERELEASE #0: Fri Aug 3 18:55:22 CEST 2001
---
> FreeBSD 4.3-STABLE #0: Wed Jul 25 14:16:57 CEST 2001
11,12c11,12
< avail memory = 518213632 (506068K bytes)
< Preloaded elf kernel "kernel.4.4-PRERELEASE.buggy" at 0xc047a000.
---
> avail memory = 518299648 (506152K bytes)
> Preloaded elf kernel "kernel" at 0xc0465000.
39c39
< aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
---
> aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
41c41
< aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
---
> aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
Cosmetic differences only.
Attached is a verbose boot-up with the new kernel into single-user,
followed by a fsck of the root filesystem. This triggers the timeouts.
Let me know if you need further information. As you see this is a
relatively fast machine, so I could quickly make a new kernel if that
would help at any stage. (Time permitting of course. In Germany it's
21:00 at this moment.)
Anyhow I wish you a very enjoyable honeymoon!
Helge
--ELM996951466-20131-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=out
Content-Description: /home/hmo/out
Content-Transfer-Encoding: 7bit
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 640kB/523256kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(toor@some.where.else, Fri Aug 3 18:45:13 CEST 2001)
Loading /boot/defaults/loader.conf
/kernel text=0x292fbf data=0x34524+0x216d4 syms=[0x4+0x39f60+0x4+0x3f8b8]
Hit [Enter] to boot immediately, or any other key for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
ok unload
ok load kernel.4.4-PRERELEASE.buggy
/kernel.4.4-PRERELEASE.buggy text=0x2985f5 data=0x43820+0x21a94 syms=[0x4+0x3a5a0+0x4+0x3ffe8]
ok boot -sv
SMAP type=01 base=00000000 00000000 len=00000000 000a0000
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 1fefe000
SMAP type=02 base=00000000 1fffe000 len=00000000 00002000
SMAP type=02 base=00000000 fff80000 len=00000000 00080000
SMAP type=02 base=00000000 fec00000 len=00000000 00010000
SMAP type=02 base=00000000 fee00000 len=00000000 00010000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-PRERELEASE #0: Fri Aug 3 18:55:22 CEST 2001
toor@some.where.else:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 927125487 Hz, i8254 clock: 1193212 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (927.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536862720 (524280K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x004a0000 - 0x1fff5fff, 531980288 bytes (129878 pages)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
avail memory = 518213632 (506068K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xc79e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdc90
Preloaded elf kernel "kernel.4.4-PRERELEASE.buggy" at 0xc047a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0009, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fe102000, size 12
map[14]: type 1, range 32, base 0000ecc0, size 6
map[18]: type 1, range 32, base fe000000, size 20
found-> vendor=0x1002, dev=0x4759, revid=0x7a
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc000000, size 24
map[14]: type 1, range 32, base 0000e800, size 8
map[18]: type 1, range 32, base fe101000, size 12
found-> vendor=0x1166, dev=0x0200, revid=0x50
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 000008b0, size 4
found-> vendor=0x1166, dev=0x0220, revid=0x04
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base fe100000, size 12
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 11 at device 8.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:b3:30:9d:ad
fxp0: PCI IDs: 8086 1229 8086 100c 0008
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci0: <ATI model 4759 graphics accelerator> (vendor=0x1002, dev=0x4759) at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x08b0
ata0: mask=03 status0=50 status1=01
ata0: mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=00 status1=01
ata0-slave: ATA probe a=04 b=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x08b8
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 10 at device 15.2 on pci0
ohci0: (New OHCI DeviceId=0x02201166)
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x0962, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base fa100000, size 12
map[14]: type 1, range 32, base 0000ccc0, size 6
map[18]: type 1, range 32, base fa000000, size 20
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci1
found-> vendor=0x9005, dev=0x00cf, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000dc00, size 8
map[14]: type 1, range 64, base f8fff000, size 12
found-> vendor=0x9005, dev=0x00cf, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 0000d800, size 8
map[14]: type 1, range 64, base f8ffe000, size 12
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem 0xf8fff000-0xf8ffffff irq 11 at device 4.0 on pci2
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
using shared irq11.
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xf8ffe000-0xf8ffefff irq 10 at device 4.1 on pci2
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
using shared irq10.
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xccc0-0xccff mem 0xfa000000-0xfa0fffff,0xfa100000-0xfa100fff irq 5 at device 8.0 on pci1
fxp1: using memory space register mapping
fxp1: Ethernet address 00:b0:d0:b0:73:68
fxp1: PCI IDs: 8086 1229 1028 009b 0008
fxp1: Chip Type: 0
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp1 attached
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 f0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 684440, tty 630098, net 6708b8
bpf: sl0 attached
bpf: faith0 attached
bpf: lo0 attached
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <TEAC CD-ROM CD-224E/3.7C> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
Creating DISK da0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <FUJITSU MAJ3091MC 5508> Fixed Direct Access SCSI-4 device
pass0: Serial Number 50024089
pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <DELL 1x4 U2W SCSI BP 1.16> Fixed Processor SCSI-2 device
pass1: Serial Number 1
pass1: 3.300MB/s transfers
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <DELL 1x4 U2W SCSI BP 1.16> Fixed Processor SCSI-2 device
pass1: Serial Number 1
pass1: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAJ3091MC 5508> Fixed Direct Access SCSI-4 device
da0: Serial Number 50024089
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s2a
da0s1: type 0xde, start 63, end = 80324, size 80262 : OK
da0s2: type 0xa5, start 80325, end = 17767889, size 17687565 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:
Cannot read termcap database;
using dumb terminal settings.
# fsck /
** /dev/da0s2a
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1280 files, 36907 used, 90116 free (284 frags, 11229 blocks, 0.2% fragmentation)
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x63, 0x160, 0x0, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x6751000 : Length 4096
sg[1] - Addr 0x6712000 : Length 4096
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x63, 0x160, 0x0, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x6751000 : Length 4096
sg[1] - Addr 0x6712000 : Length 4096
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
(da0:ahc0:0:0:0): SCB 0xe - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 14
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x6710400 : Length 1024
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0xe - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 14
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x6710400 : Length 1024
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
***** FILE SYSTEM MARKED CLEAN *****
(da0:ahc0:0:0:0): SCB 0xe - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 14
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x6680000 : Length 1024
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0xe - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 14
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x6680000 : Length 1024
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x66a2000 : Length 2048
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x66a2000 : Length 2048
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x66a2000 : Length 2048
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x66a2000 : Length 2048
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x66a2000 : Length 2048
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0x3 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list: 3
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10
sg[0] - Addr 0x66a2000 : Length 2048
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
--ELM996951466-20131-0_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200108042119.XAA20580>