Date: Mon, 11 Jul 2005 14:27:42 -0500 (EST) From: corr@ffni.com To: freebsd-scsi@freebsd.org Subject: HP Storageworks 72x6 Message-ID: <49590.65.116.160.26.1121110062.squirrel@webmail.ffni.com>
next in thread | raw e-mail | index | archive | help
Hey all,
I'm having a strange problem with my SCSI card (Adaptec 2120s) and a HP
Storageworks 72x6 external tape drive.
FreeBSD doesn't seem to see the tape drive when the kernel boots, however,
the SCSI card does.
Does anyone else have this particular tape drive working?
Note: In the kernel config, the Exabyte and the hard drive are on a
different SCSI controller; an Adaptec 2940.
Any ideas would be much appreciated!
Thanks,
-chris
Fairnet LLC
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-STABLE #0: Mon Jul 11 12:36:55 EST 2005
root@backup.ffni.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 402587648 (393152K bytes)
avail memory = 385916928 (376872K bytes)
Preloaded elf kernel "kernel" at 0xc0560000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xdc000000-0xdfffffff at d
evice 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <SiS 6326 SVGA controller> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11
at de
vice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device
7.3 on pci0
aac0: <Adaptec SCSI RAID 2120S> mem 0xd0000000-0xd7ffffff irq 10 at device
8.0 o
n pci0
aac0: Unknown processor 100MHz, 112MB cache memory, optional battery not
install
ed
aac0: Kernel 4.1-0, Build 7244, S/N be0932
aac0: Supported
Options=11d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,S
OFTERR,SGMAP64,ALARM,NONDASD>
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem
0xe8000000-0xe80
00fff irq 12 at device 9.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xe8001000-0xe80010ff ir
q 5 at device 10.0 on pci0
rl0: Ethernet address: 00:e0:7d:c3:dc:a8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem
0xc0000-0xcbfff,0xcc000-0xd07ff,0xd1000-0xd67ff on
isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CREATIVE CD5233E-N> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <EXABYTE EXB-82058VQANXR1 07T0> Removable Sequential Access SCSI-2
device
sa0: 5.000MB/s transfers (5.000MHz, offset 11)
da0 at ahc0 bus 0 target 15 lun 0
da0: <FUJITSU MAN3735MP 0108> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 127, 16bit), Tagged Queueing
Enable
d
da0: 70092MB (143550456 512 byte sectors: 255H 63S/T 8935C)
Mounting root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49590.65.116.160.26.1121110062.squirrel>