Date: Mon, 27 Oct 2003 11:23:54 +0200 From: "Putinas" <pilkis@gmx.net> To: <freebsd-current@FreeBSD.ORG> Subject: sony usb floppy drive problems Message-ID: <006d01c39c6c$0af18fb0$1e64a8c0@spotripoli.local>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_006A_01C39C7C.CDF29210 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi all, I had today to format a lot of floppy disks and wanted to speed up things with connecting second floppy disk drive to my desktop, but with no sucsess ... Here is what I got when I try to fdformat /dev/da0 , detach, attach device : ( in case you need full dmesg is attached ) (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) GEOM: create disk da0 dp=0xc6b39850 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SONY USB-FDU 4.01> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ar0s3a lock order reversal 1st 0xc6b6ea90 rtentry (rtentry) @ /usr/src/sys/net/route.c:182 2nd 0xc6a0617c radix node head (radix node head) @ /usr/src/sys/net/route.c:544 Stack backtrace: (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: at uhub2 port 2 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry GEOM: destroy disk da0 dp=0xc6b39850 umass0: detached umass0: Sony USB Floppy Drive, rev 1.10/4.01, addr 2 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) GEOM: create disk da0 dp=0xc695a050 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SONY USB-FDU 4.01> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C) umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0 ------=_NextPart_000_006A_01C39C7C.CDF29210 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Oct 27 10:44:04 EET 2003 root@pilkishome.spo-tripoli.local:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2d000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2d26c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2715.14-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory =3D 1073725440 (1023 MB) avail memory =3D 1033555968 (985 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P4G8X > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00f2320 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 5 pcib0: slot 29 INTC is routed to irq 10 pcib0: slot 29 INTD is routed to irq 9 pcib0: slot 31 INTA is routed to irq 10 agp0: <Intel Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at = device 0.0 on pci0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> mem 0xf4000000-0xf7ffffff at device 1.0 on = pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f = irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd400-0xd41f = irq 5 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.20, addr 2, iclass 3/1 ums0: 4 buttons and Z dir. uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd000-0xd01f = irq 10 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Floppy Drive, rev 1.10/4.01, addr 2 pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 4 INTA is routed to irq 9 pcib2: slot 5 INTA is routed to irq 10 pcib2: slot 6 INTA is routed to irq 9 atapci0: <SiI 3112 SATA150 controller> port = 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 = mem 0xed000000-0xed0001ff irq 9 at device 4.0 on pci2 atapci0: [MPSAFE] ata2: at 0xed000000 on atapci0 ata2: [MPSAFE] ata3: at 0xed000000 on atapci0 ata3: [MPSAFE] bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem = 0xec800000-0xec80ffff irq 10 at device 5.0 on pci2 bge0: Ethernet address: 00:0c:6e:11:8c:d3 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, = 1000baseTX-FDX, auto pci2: <multimedia, audio> at device 6.0 (no driver attached) pci2: <input device> at device 6.1 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH4 UDMA100 controller> port = 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci1 ata1: [MPSAFE] fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port = 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <Option ROMs> at iomem 0xd4000-0xd87ff,0xd0000-0xd3fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 Timecounter "TSC" frequency 2715136284 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=3D0xc6b53a70 ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA66 acd0: CDRW <HL-DT-ST GCE-8481B> at ata1-master PIO4 GEOM: create disk ad4 dp=3D0xc6b53770 ad4: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata2-master UDMA100 GEOM: create disk ad6 dp=3D0xc6b53370 ad6: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata3-master UDMA100 GEOM: create disk ar0 dp=3D0xc6b3b1e0 ar0: 235600MB <ATA RAID0 array> [30034/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) GEOM: create disk da0 dp=3D0xc6b39850 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SONY USB-FDU 4.01> Removable Direct Access SCSI-0 device=20 da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ar0s3a lock order reversal 1st 0xc6b6ea90 rtentry (rtentry) @ /usr/src/sys/net/route.c:182 2nd 0xc6a0617c radix node head (radix node head) @ = /usr/src/sys/net/route.c:544 Stack backtrace: (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have = changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: at uhub2 port 2 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry GEOM: destroy disk da0 dp=3D0xc6b39850 umass0: detached umass0: Sony USB Floppy Drive, rev 1.10/4.01, addr 2 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) GEOM: create disk da0 dp=3D0xc695a050 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SONY USB-FDU 4.01> Removable Direct Access SCSI-0 device=20 da0: 1.000MB/s transfers da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C) umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, = scsi status =3D=3D 0x0 ------=_NextPart_000_006A_01C39C7C.CDF29210--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006d01c39c6c$0af18fb0$1e64a8c0>