Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 12 Mar 2008 22:20:45 +0100 (CET)
From:      "Remko Lodder" <remko@elvandar.org>
To:        "Sean Chittenden" <sean@chittenden.org>
Cc:        freebsd-net@freebsd.org, Giulio Ferro <auryn@zirakzigil.org>
Subject:   Re: VLAN trunking and fragmentation
Message-ID:  <55002.195.64.94.120.1205356845.squirrel@galain.elvandar.org>
In-Reply-To: <D8BE14C3-9897-4F19-A5AC-6770995423E5@chittenden.org>
References:  <47D7C34E.8060805@zirakzigil.org> <D8BE14C3-9897-4F19-A5AC-6770995423E5@chittenden.org>

next in thread | previous in thread | raw e-mail | index | archive | help

On Wed, March 12, 2008 8:38 pm, Sean Chittenden wrote:
>> interface ethernet 1/g1
>> switchport mode trunk
>> switchport trunk allowed vlan add 10
>> exit
>
> I think this is an issue with default VLAN membership.  I have this
> config running on *hundreds* of servers without issue.  Since Dell
> should be a cisco rip-off, on your switchport config, throw in
> (haven't tested this, on dell's CLI):
>
>   switchport trunk encapsulation dot1q
>
> then change your ifconfig foo to:
>
> cloned_interfaces="vlan10 vlan11"
> ifconfig_re0="media 100baseTX mediaopt full-duplex"
> ifconfig_vlan10="vlan 10 vlandev re0"
> ifconfig_vlan10_alias0="inet 192.168.60.1 netmask 255.255.255.0"
> ifconfig_vlan11="vlan 11 valndev re0"
> ifconfig_vlan11_alias0="inet 192.168.100.1 netmask 255.255.255.0"
>
> FWIW, I think you'll find fewer gray hairs if you stick to the
> convention of using a vlan device that has the same VLAN tag.  You may
> be able to have a default VLAN, but I consider it poor practice to
> rely on default VLAN membership.
>
> There are good reasons to have a default VLAN configured, but this
> doesn't sound like one of those cases.
>
> Stick with explicit VLAN tagging on your servers and you can't go wrong.
>
> -sc
>
> --
> Sean Chittenden
> sean@chittenden.org
> http://sean.chittenden.org/
>

For what it's worth: I am using the above setup a lot and that works fine
for me!

-- 
/"\   Best regards,                      | remko@FreeBSD.org
\ /   Remko Lodder                       | remko@EFnet
 X    http://www.evilcoder.org/          |
/ \   ASCII Ribbon Campaign              | Against HTML Mail and News





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55002.195.64.94.120.1205356845.squirrel>