Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 8 Jun 2012 10:06:14 -0700
From:      Devin Teske <devin.teske@fisglobal.com>
To:        Rick Miller <vmiller@hostileadmin.com>
Cc:        FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: How do I determine support for $xx?
Message-ID:  <1FCB8643-87F8-4B89-A5DC-1082B20F8682@fisglobal.com>
In-Reply-To: <7BDA2790-A852-4BA1-B6D3-BCA3C465A341@fisglobal.com>
References:  <CAHzLAVHJL-%2B5Aofcf%2BG8p19ZQX0s5QA=M4t5D7Hz%2B-Fwuoqkgg@mail.gmail.com> <7BDA2790-A852-4BA1-B6D3-BCA3C465A341@fisglobal.com>

next in thread | previous in thread | raw e-mail | index | archive | help

On Jun 8, 2012, at 9:45 AM, Devin Teske wrote:

> Hi Rick (!),
>=20
> On Jun 8, 2012, at 8:07 AM, Rick Miller wrote:
>=20

[snip]

>>=20
>> I browsed the source and found many references to the BCM5719 and
>> BCM5720.  However, I am unfamiliar enough with driver programming in C
>> to identify if a controller is fully supported.
>>=20
>=20

[snip]

> If you were running, say, 8.0-R, even if you have the bge(4) driver loade=
d, you would see this in /var/run/dmesg.boot:
>=20
> 	pciN: <unknown card> (vendor=3D0x1106, dev=3D0x165f) at X.Y
>=20

Correction, (specific to BCM5720) you'd see:

	pciN: <unknown card> (vendor=3D0x14e4, dev=3D0x165f) at X.Y

Which, btw, you can confirm to yourself by executing the following within 8=
.3-R (with attached bge(4)):

$ pciconf -lv | awk '/^bge/{print $1,$4}'
bge0@pciN:A:B:C: chip=3D0x165f14e4

Otherwise, you can see an unknown (non-working bge(4)) Broadcom BCM5720 har=
dware by executing (on 8.0-R for example):

$ grep unk /var/run/dmesg.boot | grep 0x14e4
pciN: <unknown card> (vendor=3D0x14e4, dev=3D0x165f) at X.Y

NOTE: On a system where all hardware is probed/attached, "grep unk /var/run=
/dmesg.boot" should not produce any results. In this case, pciconf is your =
tool for probing vendor/device IDs.


> NOTE: Insert random numbers for "N", and "X.Y"
>=20
> How you know that 8.3-R's bge(4) driver supports the BCM5720 is because t=
his source file:
>=20
> http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/bge/if_bgereg.h?annotat=
e=3D1.83.2.35.2.1
>=20
> NOTE: I specifically pointed you at CVS instead of SVN so that you can se=
e the version tagged for 8.3-R
>=20
> Specifically, this line:
>=20
> 	2309: #define        BCOM_DEVICEID_BCM5720           0x165F

[snip]

--=20
Devin

_____________
The information contained in this message is proprietary and/or confidentia=
l. If you are not the intended recipient, please: (i) delete the message an=
d all copies; (ii) do not disclose, distribute or use the message in any ma=
nner; and (iii) notify the sender immediately. In addition, please be aware=
 that any message addressed to our domain is subject to archiving and revie=
w by persons other than the intended recipient. Thank you.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1FCB8643-87F8-4B89-A5DC-1082B20F8682>