Date: Thu, 22 Jul 2004 10:17:53 -0500 From: Joseph Peterson <joseph.peterson@gmail.com> To: peter lageotakes <plageotakes@yahoo.com> Cc: freebsd-questions@freebsd.org Subject: Re: cam/passthrough device question Message-ID: <38a23c360407220817be0183f@mail.gmail.com> In-Reply-To: <20040722061341.59049.qmail@web14603.mail.yahoo.com> References: <20040722061341.59049.qmail@web14603.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have all of these in my kernel config file, but I'm getting the following in my dmesg; ata1-master: FAILURE - ATAPI_RESET no interrupt acd0: CDRW <TOSHIBA DVD-ROM SD-R2412> at ata1-master PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <TOSHIBA DVD-ROM SD-R2412 1330> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present yet when I start xcdroast, it tells me there are no CD burners in the system, even if I manually tell it to look at /dev/cd0 (which exists) it tells me it doesnt.. And yes, I'm running xcdroast as root. any thoughts? Oh yeah, here is my /boot/loader.conf hw.ata.atapi="1" #hw.ata.atapi_dma="1" (if that line is uncommented, then the machine takes forever to boot while trying to init acd0) -joe On Wed, 21 Jul 2004 23:13:41 -0700 (PDT), peter lageotakes <plageotakes@yahoo.com> wrote: > > > --- Wojciech Puchar <wojtek@tensor.3miasto.net> wrote: > > i'm now running generic 5.2.1 kernel (to narrow list > > of possible sources). > > > > i have: > > atapci0: <Intel PIIX4 UDMA33 controller> port > > 0xf000-0xf00f at device 7.1 > > on pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata0: [MPSAFE] > > ata1: at 0x170 irq 15 on atapci0 > > ata1: [MPSAFE] > > > > and > > > > GEOM: create disk ad0 dp=0xc273f560 > > ad0: 12419MB <ST313032A> [25232/16/63] at > > ata0-master UDMA33 > > acd0: CDRW <RICOH CD-R/RW MP7083A> at ata1-master > > PIO4 > > > > > > devfs mounted /dev/ contains /dev/xpt0 > > > > so it does have xpt interface. > > > > > > camcontrol devlist -v shows: > > -su-2.05b# camcontrol devlist -v > > scbus-1 on xpt0 bus 0: > > < > at scbus-1 target > > -1 lun -1 (xpt0) > > > > > > CD-RW drive isn't shown and of cource cdrecord > > doesn't see anything too. > > > > what i'm doing wrong? > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > > "freebsd-questions-unsubscribe@freebsd.org" > > > > www.freebsd.org/handbook > Section 16.6.9 > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html > > The following items must be compiled into your kernel: > device atapicam > device scbus > device cd > device pass > > FYI: Not all of them are in by default. Sorry not in > front of my FreeBSD machine right now, otherwise I > would grep through the Generic file. > > Hope this helps, > Pete > > > __________________________________ > Do you Yahoo!? > Vote for the stars of Yahoo!'s next ad campaign! > http://advision.webevents.yahoo.com/yahoo/votelifeengine/ > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38a23c360407220817be0183f>