Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 25 Dec 2003 16:10:07 -0500
From:      "fbsd_user" <fbsd_user@a1poweruser.com>
To:        "Kevin D. Kinsey, DaleCo, S.P." <kdk@daleco.biz>
Cc:        "freebsd-questions@FreeBSD. ORG" <freebsd-questions@freebsd.org>
Subject:   RE: FTP command question
Message-ID:  <MIEPLLIBMLEEABPDBIEGIEOFFBAA.fbsd_user@a1poweruser.com>
In-Reply-To: <MIEPLLIBMLEEABPDBIEGCEMLFBAA.fbsd_user@a1poweruser.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Solved the problem. It had nothing to do with FTP. It was the way I
had DHCP configured.
The FBSD LAN box was signed the last IP address, the one used for
broadcast.
After changing my DHCP config had no problem FTP and Telnet to LAN
FBSD box.

-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of fbsd_user
Sent: Wednesday, December 24, 2003 2:30 PM
To: Kevin D. Kinsey, DaleCo, S.P.
Cc: freebsd-questions@FreeBSD. ORG
Subject: RE: FTP command question

Gateway box is ip 10.0.10.2 running FBSD 4.7, intend active with ftp
and telnet enabled.
Have 2 boxes on lan, one win box and one FBSD 4.9 box. Win box can
telnet and ftp to gateway fine.
Lan FBSD 4.9 box has same telnet and ftp config as gateway.
Can see intend running on both FBSD gateway and Lan boxes with ps ax
command.
Can ftp and telnet from Lan FBSD to gateway.
Gateway box gets timed out, can not connect to 10.0.10.7 when trying
to telnet or ftp to LAN box.
Can ping LAN FBSD box ok. No firewall on lan box and gateway
firewall only has rules to pass all on LAN interface.
Lan FBSD box can access public internet. Ran cvsup job to install
some port config files and it worked as expected.

Just do not understand why gateway can not access FBSD lan box using
telnet and ftp and always issues message connection: timed out. I
never get to the point where I am asked for id and password.

Any ideas



-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Kevin D.
Kinsey, DaleCo, S.P.
Sent: Wednesday, December 24, 2003 2:04 PM
To: fbsd_user@a1poweruser.com
Cc: freebsd-questions@FreeBSD. ORG
Subject: Re: FTP command question

fbsd_user wrote:

>I have an LAN FBSD box which has  anonymous FTP server installed
>from /stand/sysinstall.
>I an trying to login to it from the FBSD gateway.
>I use this command ftp -av 10.0.10.7 which is the ip address of the
>target FBSD box.
>This just hangs and does nothing. Ctrl + c  exits ftp and returns
>the command prompt.
>
>What is the correct syntax of the ftp command to open a interactive
>ftp session
>with the LAN FBSD box's anonymous FTP sever at ip address
10.0.10.7?
>
>Thanks and Marry Christmas
>
>
>
Try just

$ftp 10.0.10.7

and login as "anonymous".

-v is a default case, IIRC, so there'd
be little difference.  Perhaps you'll
get some further information.

No firewall, ACL's etc. on FTP box?

Kevin Kinsey
DaleCo, S.P.

_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"

_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGIEOFFBAA.fbsd_user>