From owner-freebsd-current Fri Feb 7 12:36:52 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 084C137B401 for ; Fri, 7 Feb 2003 12:36:37 -0800 (PST) Received: from fsp1.physik.ruhr-uni-bochum.de (fsp1.physik.ruhr-uni-bochum.de [134.147.168.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id 67C4043FCB for ; Fri, 7 Feb 2003 12:36:32 -0800 (PST) (envelope-from strattbo@fsp1.physik.ruhr-uni-bochum.de) Received: (from strattbo@localhost) by fsp1.physik.ruhr-uni-bochum.de (8.11.6/8.11.6/SuSE Linux 0.5) id h17Kac318762 for current@freebsd.org; Fri, 7 Feb 2003 21:36:38 +0100 Date: Fri, 7 Feb 2003 21:36:38 +0100 From: Thomas Stratmann To: current@freebsd.org Subject: no disks w/ acpi; long wait pnp_probe w/o acpi Message-ID: <20030207213638.B18577@fsp1.physik.ruhr-uni-bochum.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.22.1i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi everyone, the situation is the same as described in my previous posting, except: * new kernel from yesterday's sources * played around a bit with my device.hint, only minor changes. Dmesg output from two boots is appended. First is an acpi-boot, second without acpi (unset acpi_load in loader) with location marked where the boot waits for approx. five minutes. Very annoying. Can someone see what's going on? Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #6: Fri Feb 7 17:32:10 GMT 2003 root@curdwarf:/usr/src/sys/i386/compile/bootable_dbg Preloaded elf kernel "/boot/kernel/kernel" at 0xc049a000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc049a0b4. Calibrating clock(s) ... TSC clock: 233259209 Hz, i8254 clock: 1193038 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 233288938 Hz CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf real memory = 67174400 (64 MB) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004c1000 - 0x04007fff, 62156800 bytes (15175 pages) avail memory = 60289024 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8e20 bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc5f8 pnpbios: Found PnP BIOS data at 0xc00f8e30 pnpbios: Entry = f0000:90a8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c932f351 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug Initializing GEOMetry subsystem wlan: <802.11 Link Layer> null: mem: random: npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0438: *** Error: Looking up [\\_SB_.SBAT] in namespace, AE_NOT_FOUND ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 0, max = 2, width = 3 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_lid0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) Using $PIR table, 5 entries at 0xc00f8e80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.EIO_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.EIO_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1179, dev=0x0601, revid=0x2e bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa280, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base ffc00000, size 21, enabled map[18]: type 1, range 32, base ffb00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000ffe0, size 5, enabled found-> vendor=0x1179, dev=0x0701, revid=0x22 bus=0, slot=17, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0: at device 4.0 (no driver attached) pci0: at device 17.0 (no driver attached) pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKA) pcib0: slot 19 INTA is routed to irq 11 pcic0: irq 11 at device 19.0 on pci0 pcic0: PCI Memory allocated: 0x88000000 pcic0: PCI Configuration space: 0x00: 0x060f1179 0x04800003 0x06070020 0x00820000 0x10: 0x88000000 0x04800000 0x00141400 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x0420010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard0: on pcic0 pcib0: matched entry for 0.19.INTB (source \\_SB_.PCI0.EIO_.LNKB) pcib0: slot 19 INTB is routed to irq 11 pcic1: irq 11 at device 19.1 on pci0 pcic1: PCI Memory allocated: 0x88001000 pcic1: PCI Configuration space: 0x00: 0x060f1179 0x04800003 0x06070020 0x00820000 0x10: 0x88001000 0x04800000 0x00151500 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x0420020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard1: on pcic1 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x2001 0x2011 0x2011 0x2011 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: on ppbus0 lp0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) Device configuration finished. procfs registered Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times Mounting root from ufs:/dev/ad0s3a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot> c Mounting root from c Can't allocate root mount for filesystem 'c': 19 Root mount failed: 19 Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot> panic: Root mount failed, startup aborted. syncing disks, buffers remaining... done Uptime: 18s Terminate ACPI pcic0: Autodetected 5.0V card pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is ff Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #6: Fri Feb 7 17:32:10 GMT 2003 root@curdwarf:/usr/src/sys/i386/compile/bootable_dbg Preloaded elf kernel "/boot/kernel/kernel" at 0xc0450000. Calibrating clock(s) ... TSC clock: 233260140 Hz, i8254 clock: 1193043 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 233288881 Hz CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf real memory = 67174400 (64 MB) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00477000 - 0x04007fff, 62459904 bytes (15249 pages) avail memory = 60596224 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8e20 bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc5f8 pnpbios: Found PnP BIOS data at 0xc00f8e30 pnpbios: Entry = f0000:90a8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c932f351 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug Initializing GEOMetry subsystem wlan: <802.11 Link Layer> random: null: mem: npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) Using $PIR table, 5 entries at 0xc00f8e80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 pcib0: at pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1179, dev=0x0601, revid=0x2e bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa280, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base ffc00000, size 21, enabled map[18]: type 1, range 32, base ffb00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000ffe0, size 5, enabled found-> vendor=0x1179, dev=0x0701, revid=0x22 bus=0, slot=17, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base fff00000, size 12, enabled found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 1, range 32, base fff01000, size 12, enabled found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0: at device 4.0 (no driver attached) pci0: at device 17.0 (no driver attached) pci_cfgintr_virgin: using routable interrupt 3 pci_cfgintr: 0:19 INTA routed to irq 3 pcic0: mem 0xfff00000-0xfff00fff irq 3 at device 19.0 on pci0 pcic0: PCI Configuration space: 0x00: 0x060f1179 0x04800007 0x06070020 0x00820000 0x10: 0xfff00000 0x04800000 0x00141400 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x04200103 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard0: on pcic0 pci_cfgintr_search: linked (1) to configured irq 3 at 0:19:0 pci_cfgintr: 0:19 INTB routed to irq 3 pcic1: mem 0xfff01000-0xfff01fff irq 3 at device 19.1 on pci0 pcic1: PCI Configuration space: 0x00: 0x060f1179 0x04800007 0x06070020 0x00820000 0x10: 0xfff01000 0x04800000 0x00151500 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x04200203 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard1: on pcic1 isa0: on motherboard pnpbios: 16 devices, largest 195 bytes PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0x400ffff, size=0x3f10000 PNP0c01: adding fixed memory32 range 0x4010000-0x403ffff, size=0x30000 PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 PNP0c01: adding fixed memory32 range 0xfef80000-0xfeffffff, size=0x80000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1 PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1 PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 3 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 8 device ID PNP0f13 (130fd041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1 PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1 PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1 PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1 PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0x1 PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1 PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1 PNP0c02: adding io range 0x18a0-0x18af, size=0x10, align=0x1 PNP0c02: adding io range 0x18b0-0x18bf, size=0x10, align=0x1 PNP0c02: adding io range 0x18c0-0x18cf, size=0x10, align=0x1 PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x100-0x107, size=0x8, align=0x1 PNP0c02: adding io range 0x10e-0x10e, size=0x1, align=0x1 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1 PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1 PNP0600: adding irq mask 0x4000 pnpbios: handle 12 device ID PNP0600 (0006d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 pnpbios: handle 14 device ID PNP0501 (0105d041) PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1 PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x8 pnpbios: handle 16 device ID PNP0401 (0104d041) pnpbios: handle 17 device ID PNP0a03 (030ad041) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 20 device ID PNP0e03 (030ed041) YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1 YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1 YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1 YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1 YMH0021: adding irq mask 0x20 YMH0021: adding dma mask 0x2 YMH0021: adding dma mask 0x1 pnpbios: handle 22 device ID YMH0021 (2100a865) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: