Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Oct 2018 00:31:08 +0000
From:      Koakuma <koachan@protonmail.com>
To:        freebsd-ppc <freebsd-ppc@freebsd.org>
Subject:   Re: G5 fans
Message-ID:  <-h2qaAN8uPVLOtb4ngIa-cEr-sGMGrq0opq1cczaWnSCvra_jucS8kTEPCaB64a5bWcSzxsEcCr52NsrUKrOUjP5p6wusFed8OIVReIjD94=@protonmail.com>

Next in thread | Raw E-Mail | Index | Archive | Help
Hi Michael,

The first command failed to run for me.
0 > dev u3/i2c/fan can't find device u3/i2c/fan ok

Looking at the output of 'dev / ls', there's several devices named
"fan" under /smu@0,0/fans@4a00/*, but running the " .status" command
on those devices gave me this error:
0 > " .status" " /smu@0,0/fans@4a00/fan@0" open-dev $call-method
Method <.status> not found; ihandle=3Dffb352c0 phandle=3Dff99ee00
 ok

This is on a PowerMac11,2, 2 GHz "dual-core" model.

On Sun Oct 28 22:02:15 UTC 2018, Michael Tuexen=C2=A0<tuexen at freebsd.org=
>
wrote:
> Dear all,
>
> if you have access to a G5 Powermac, could you provide the output of the
> following command from the OpenFirmware prompt:
>
> dev u3/i2c/fan
> " .status" " u3/i2c/fan" open-dev $call-method
>
> I'm interested in the RPM channels which are reported as Failed/Available=
/Active.
> Please provide also some information what kind of PowerMac G5 it is.
>
> Thanks for your help.
>
> Best regards
> Michael




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?-h2qaAN8uPVLOtb4ngIa-cEr-sGMGrq0opq1cczaWnSCvra_jucS8kTEPCaB64a5bWcSzxsEcCr52NsrUKrOUjP5p6wusFed8OIVReIjD94=>