Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 Oct 1998 12:22:19 -0700
From:      Mike Smith <mike@smith.net.au>
To:        Poul-Henning Kamp <phk@critter.freebsd.dk>
Cc:        Mike Smith <mike@smith.net.au>, John Galbraith <john@ece.arizona.edu>, freebsd-hardware@FreeBSD.ORG, john@ece1.ece.arizona.edu
Subject:   Re: new GPIB driver revision available 
Message-ID:  <199810191922.MAA00759@dingo.cdrom.com>
In-Reply-To: Your message of "Mon, 19 Oct 1998 21:04:58 %2B0200." <20225.908823898@critter.freebsd.dk> 

next in thread | previous in thread | raw e-mail | index | archive | help
> In message <199810191858.LAA00579@dingo.cdrom.com>, Mike Smith writes:
> >> Sorry for pestering you with this, I've found a card at a reasonable
> >> price which says "hardware compatible with NI-GPIB PCIIA", do you
> >> think your driver would run that card ?
> >
> >Does it have an NI TNT chip on it?  The "old" NI GPIB cards used the TI 
> >GPIB controller chip, and I don't think John's driver will work (well, 
> >if at all) with that.
> >
> >There's actually four different NI cards; the really old NEC-based 
> >ones, the TI based ones, the TI based ones with the GPIB accelerator 
> >chip and the TNT based cards.
> 
> And what I'm trying to figure out is "If I tell my client to call the
> Danish rep for Nat.Inst, what should he tell them that he wants to buy ?"

You tell your client that you'll buy the board, and put a 20% markup on 
it.  Should be quite profitable. 8)

If you want to buy the "real thing" National Instruments card, that's
the AT-GPIB/TNT.  Don't get the PnP one unless you want to add PnP
support to John's driver.  I can't give you the URL off National
Instruments' webpage, as it's a mile long.  Their online store price 
is US$495.oo

-- 
\\  Sometimes you're ahead,       \\  Mike Smith
\\  sometimes you're behind.      \\  mike@smith.net.au
\\  The race is long, and in the  \\  msmith@freebsd.org
\\  end it's only with yourself.  \\  msmith@cdrom.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199810191922.MAA00759>