Date: Wed, 14 Nov 2001 10:04:19 -0500 From: <FJU@Fritzilldo.com> To: <Questions@FreeBSD.org> Subject: My Kernel Config File Message-ID: <002f01c16d1d$a3247840$0301a8c0@fritzilldo>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_002C_01C16CF3.BA007750
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hello,
I read in my book that if make fails when trying to compile a new kernel
that I should send the kernel config file to you to look over. I tried to
make it and it gave me this error:
Makefile:28: *** missing seperator. Stop.
I hope you can help me. (my book is The Complete FreeBSD (3rd Edition))
Thanks.
------=_NextPart_000_002C_01C16CF3.BA007750
Content-Type: application/octet-stream;
name="FRITZILLDO"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="FRITZILLDO"
#=0A=
# FRITZILLDO -- My recovery Kernel config file.=0A=
#=0A=
# $FreeBSD: src/sys/i386/conf/FRITZILLDO,v 1.246.2.8 2000/07/20 02:51:02 =
msmith Exp $=0A=
=0A=
machine i386=0A=
cpu I386_CPU=0A=
cpu I486_CPU=0A=
cpu I586_CPU=0A=
cpu I686_CPU=0A=
ident FRITZILLDO=0A=
maxusers 32=0A=
=0A=
makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A=
=0A=
options MATH_EMULATE #Support for x87 emulation=0A=
options INET #InterNETworking=0A=
options INET6 #IPv6 communications protocols=0A=
options FFS #Berkeley Fast Filesystem=0A=
options FFS_ROOT #FFS usable as root device [keep this!]=0A=
options SOFTUPDATES #Enable FFS soft updates support=0A=
options MFS #Memory Filesystem=0A=
options MD_ROOT #MD is a potential root device=0A=
options NFS #Network Filesystem=0A=
options NFS_ROOT #NFS usable as root device, NFS required=0A=
options MSDOSFS #MSDOS Filesystem=0A=
options CD9660 #ISO 9660 Filesystem=0A=
options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A=
options PROCFS #Process filesystem=0A=
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A=
options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A=
options UCONSOLE #Allow users to grab the console=0A=
options USERCONFIG #boot -c editor=0A=
options VISUAL_USERCONFIG #visual boot -c editor=0A=
options KTRACE #ktrace(1) support=0A=
options SYSVSHM #SYSV-style shared memory=0A=
options SYSVMSG #SYSV-style message queues=0A=
options SYSVSEM #SYSV-style semaphores=0A=
options P1003_1B #Posix P1003_1B real-time extensions=0A=
options _KPOSIX_PRIORITY_SCHEDULING=0A=
options ICMP_BANDLIM #Rate limit bad replies=0A=
options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A=
=0A=
# REVISIONS TO MAKE FRITZILLDO=0A=
=0A=
options QUOTA #Enable disk quotas.=0A=
options IPFIREWALL #Enable firewall.=0A=
options IPFIREWALL_VERBOSE #Logging information.=0A=
options IPFIREWALL_FORWARD #Transparent Proxy support.=0A=
options IPFIREWALL_VERBOSE_LIMIT=3D100 #Limit verbosity.=0A=
options IPFIREWALL_DEFAULT_TO_ACCEPT #Accept everything.=0A=
options IPDIVERT #Diverting.=0A=
options IPFILTER #IP Filtering.=0A=
options IPFILTER_LOG #IP Filter Logging.=0A=
options BRIDGE #NIC Bridging.=0A=
options DUMMYNET #Used with NIC Bridging.=0A=
=0A=
=0A=
=0A=
# To make an SMP kernel, the next two are needed=0A=
#options SMP # Symmetric MultiProcessor Kernel=0A=
#options APIC_IO # Symmetric (APIC) I/O=0A=
# Optionally these may need tweaked, (defaults shown):=0A=
#options NCPU=3D2 # number of CPUs=0A=
#options NBUS=3D4 # number of busses=0A=
#options NAPIC=3D1 # number of IO APICs=0A=
#options NINTR=3D24 # number of INTs=0A=
=0A=
device isa=0A=
device eisa=0A=
device pci=0A=
=0A=
# Floppy drives=0A=
device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A=
device fd0 at fdc0 drive 0=0A=
device fd1 at fdc0 drive 1=0A=
=0A=
# ATA and ATAPI devices=0A=
device ata0 at isa? port IO_WD1 irq 14=0A=
device ata1 at isa? port IO_WD2 irq 15=0A=
device ata=0A=
device atadisk # ATA disk drives=0A=
device atapicd # ATAPI CDROM drives=0A=
device atapifd # ATAPI floppy drives=0A=
device atapist # ATAPI tape drives=0A=
options ATA_STATIC_ID #Static device numbering=0A=
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices=0A=
=0A=
# SCSI Controllers=0A=
device ahb # EISA AHA1742 family=0A=
device ahc # AHA2940 and onboard AIC7xxx devices=0A=
device amd # AMD 53C974 (Teckram DC-390(T))=0A=
device dpt # DPT Smartcache - See LINT for options!=0A=
device isp # Qlogic family=0A=
device ncr # NCR/Symbios Logic=0A=
device sym # NCR/Symbios Logic (newer chipsets)=0A=
options SYM_SETUP_LP_PROBE_MAP=3D0x40=0A=
# Allow ncr to attach legacy NCR devices when =0A=
# both sym and ncr are configured=0A=
=0A=
device adv0 at isa?=0A=
device adw=0A=
device bt0 at isa?=0A=
device aha0 at isa?=0A=
device aic0 at isa?=0A=
=0A=
# SCSI peripherals=0A=
device scbus # SCSI bus (required) ZIP DRIVE CHANGES (VPO BELOW)=0A=
device da # Direct Access (disks) ZIP DRIVE CHANGES (VPO BELOW)=0A=
device sa # Sequential Access (tape etc)=0A=
device cd # CD=0A=
device pass # Passthrough device (direct SCSI access)=0A=
=0A=
# RAID controllers=0A=
device ida # Compaq Smart RAID=0A=
device amr # AMI MegaRAID=0A=
device mlx # Mylex DAC960 family=0A=
device twe # 3ware Escalade=0A=
=0A=
# atkbdc0 controls both the keyboard and the PS/2 mouse=0A=
device atkbdc0 at isa? port IO_KBD=0A=
device atkbd0 at atkbdc? irq 1 flags 0x1=0A=
device psm0 at atkbdc? irq 12=0A=
=0A=
device vga0 at isa?=0A=
=0A=
# splash screen/screen saver=0A=
pseudo-device splash=0A=
=0A=
# syscons is the default console driver, resembling an SCO console=0A=
device sc0 at isa? flags 0x100=0A=
=0A=
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A=
#device vt0 at isa?=0A=
#options XSERVER # support for X server on a vt console=0A=
#options FAT_CURSOR # start with block cursor=0A=
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT =
lines=0A=
#options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A=
=0A=
# Floating point support - do not disable.=0A=
device npx0 at nexus? port IO_NPX irq 13=0A=
=0A=
# Power management support (see LINT for more options)=0A=
device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A=
=0A=
# PCCARD (PCMCIA) support=0A=
device card=0A=
device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000=0A=
device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable=0A=
=0A=
# Serial (COM) ports=0A=
device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A=
device sio1 at isa? port IO_COM2 irq 3=0A=
device sio2 at isa? disable port IO_COM3 irq 5=0A=
device sio3 at isa? disable port IO_COM4 irq 9=0A=
=0A=
# Parallel port=0A=
device ppc0 at isa? irq 7=0A=
device ppbus # Parallel port bus (required)=0A=
device lpt # Printer=0A=
device plip # TCP/IP over parallel=0A=
device ppi # Parallel port interface device=0A=
device vpo # Requires scbus and da=0A=
=0A=
=0A=
# PCI Ethernet NICs.=0A=
device de # DEC/Intel DC21x4x (``Tulip'')=0A=
device fxp # Intel EtherExpress PRO/100B (82557, 82558)=0A=
device tx # SMC 9432TX (83c170 ``EPIC'')=0A=
device vx # 3Com 3c590, 3c595 (``Vortex'')=0A=
device wx # Intel Gigabit Ethernet Card (``Wiseman'')=0A=
=0A=
# PCI Ethernet NICs that use the common MII bus controller code.=0A=
device miibus # MII bus support=0A=
device dc # DEC/Intel 21143 and various workalikes=0A=
device rl # RealTek 8129/8139=0A=
device sf # Adaptec AIC-6915 (``Starfire'')=0A=
device sis # Silicon Integrated Systems SiS 900/SiS 7016=0A=
device ste # Sundance ST201 (D-Link DFE-550TX)=0A=
device tl # Texas Instruments ThunderLAN=0A=
device vr # VIA Rhine, Rhine II=0A=
device wb # Winbond W89C840F=0A=
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A=
=0A=
# ISA Ethernet NICs.=0A=
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000=0A=
device ex=0A=
device ep=0A=
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A=
# exists only as a PCMCIA device, so there is no ISA attatement needed=0A=
# and resources will always be dynamically assigned by the pccard code.=0A=
device wi=0A=
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below =
will=0A=
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A=
# mode (the factory default). If you set the switches on your ISA=0A=
# card for a manually chosen I/O address and IRQ, you must specify=0A=
# those paremeters here.=0A=
device an=0A=
# Xircom Ethernet=0A=
device xe=0A=
# The probe order of these is presently determined by =
i386/isa/isa_compat.c.=0A=
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000=0A=
device fe0 at isa? port 0x300=0A=
device le0 at isa? port 0x300 irq 5 iomem 0xd0000=0A=
device lnc0 at isa? port 0x280 irq 10 drq 0=0A=
device cs0 at isa? port 0x300=0A=
device sn0 at isa? port 0x300 irq 10=0A=
=0A=
# Pseudo devices - the number indicates how many units to allocated.=0A=
pseudo-device loop # Network loopback=0A=
pseudo-device ether # Ethernet support=0A=
pseudo-device sl 1 # Kernel SLIP=0A=
pseudo-device ppp 1 # Kernel PPP=0A=
pseudo-device tun # Packet tunnel.=0A=
pseudo-device pty # Pseudo-ttys (telnet etc)=0A=
pseudo-device md # Memory "disks"=0A=
pseudo-device gif 4 # IPv6 and IPv4 tunneling=0A=
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A=
=0A=
# The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A=
# Be aware of the administrative consequences of enabling this!=0A=
pseudo-device bpf #Berkeley packet filter=0A=
=0A=
# USB support=0A=
device uhci # UHCI PCI->USB interface=0A=
device ohci # OHCI PCI->USB interface=0A=
device usb # USB Bus (required)=0A=
device ugen # Generic=0A=
device uhid # "Human Interface Devices"=0A=
device ukbd # Keyboard=0A=
device ulpt # Printer=0A=
device umass # Disks/Mass storage - Requires scbus and da=0A=
device ums # Mouse=0A=
# USB Ethernet, requires mii=0A=
device aue # ADMtek USB ethernet=0A=
device cue # CATC USB ethernet=0A=
device kue # Kawasaki LSI USB ethernet=0A=
=0A=
------=_NextPart_000_002C_01C16CF3.BA007750--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002f01c16d1d$a3247840$0301a8c0>