Date: Wed, 5 Sep 2001 15:22:13 -0500 (CDT) From: Cary <scattered@babel.acu.edu> To: freebsd-questions <freebsd-questions@freebsd.org> Subject: dhclient problems Message-ID: <Pine.LNX.4.10.10109050940590.23753-100000@babel.acu.edu>
next in thread | raw e-mail | index | archive | help
I've had my box up and running for about 2 weeks, no problems. About
5 days ago, I suddenly started getting the following message in my
system logs:
Sep 4 20:39:54 fledermaus dhclient: send_packet: Permission denied
I have the kernel firewall (ipfw) installed and have used the rc.d
script to start it up on bootup, as a client computer. But the
dhcp.lease is recieved
without any problem when I bootup, so I don't think ipfw is the source
of the problem. If I turn my computer reboot my computer, it may or
may not get the lease at first, but then it will. Afterwards, I can
access the network and all, but then these messages start showing up
again. My ability to get work done is not affected (that I've noticed)
but it is very annoying to have to scroll through the syslogs and
seeing this repeated ad infinitum.
If anyone has any suggestions on how I can track the problem down, I'd
be happy to try them out. Below is my dmesg, for what its worth.
(disregard the improperly unmounted drives, there was a storm, no
UPS... :( you know the story). Also, if you could cc: me the response,
I'm not subscribed to questions anymore. Many thanks in advance.
Cary Mathews
Abilene Christian University
ACM Chair
| Education Committee
| System Admin: babel.acu.edu
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Tue Aug 21 19:39:39 GMT 2001
root@fledermaus.qsr.cx:/usr/src/sys/compile/FLEDERMAUS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (198.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (131072K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di cs0
config> q
avail memory = 126742528 (123772K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03cd000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03cd09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xff40-0xff5f mem 0xff800000-0xff8fffff,0xffbea000-0xffbeafff irq 2 at device 6.0 on pci0
fxp0: Ethernet address 00:a0:c9:82:3c:ec
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xffbeb000-0xffbebfff irq 10 at device 9.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
pci0: <3Dfx Voodoo Banshee graphics accelerator> at 11.0 irq 11
pcm0: <AudioPCI ES1371> port 0xff00-0xff3f irq 2 at device 17.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <XEROX 4508> PRINTER PCL5E
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcm1: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (010124)
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 1 packets/entry by default
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
ad0: 14669MB <WDC WD153BA> [29805/16/63] at ata0-master WDMA2
Waiting 10 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
da1 at ahc0 bus 0 target 8 lun 0
da1: <IBMAS400 DFHSS2W 4I4I> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2150MB (4404489 512 byte sectors: 255H 63S/T 274C)
da0 at ahc0 bus 0 target 4 lun 0
da0: <IBMAS400 DFHSS2W 4I4I> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 2150MB (4404489 512 byte sectors: 255H 63S/T 274C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10109050940590.23753-100000>