Date: Sun, 8 Sep 2002 13:48:56 -0700 From: James Long <list@museum.rain.com> To: freebsd-questions@freebsd.org Subject: 4.7-PRE and Linksys PCM100 NIC Message-ID: <20020908134856.A19401@ns.museum.rain.com>
next in thread | raw e-mail | index | archive | help
I have a Thinkpad A20m running 4.7-PRE with a Linksys PCM100 PCMCIA NIC. The generic kernel doesn't see it, and I haven't found anything in the Google archives which helps. What do I need to add to the kernel config file (below) to allow FreeBSD to probe this device successfully? Thanks, Jim Here's dmesg.boot. The inser/remove/insert sequence at the bottom is an artifact. The card was securely inserted the whole time. FWIW, it does not report that if I insert the card in slot 0. The kernel config is farther down. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-PRERELEASE #5: Sun Sep 8 13:25:05 PDT 2002 root@:/usr/src/sys/compile/A20m Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134152192 (131008K bytes) config> en ed1 config> irq ed1 11 config> po ed1 0x300 config> q avail memory = 126959616 (123984K bytes) Preloaded elf kernel "kernel" at 0xc038b000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc038b09c. Preloaded elf module "miibus.ko" at 0xc038b0ec. module_register_init: MOD_LOAD (vesa, c02892e0, 0) error 6 Pentium Pro MTRR support enabled Using $PIR table, 11 entries at 0xc00fdee0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11 pcic0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0 pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 pci0: <unknown card> (vendor=0x11c1, dev=0x0449) at 3.0 irq 11 pci0: <unknown card> (vendor=0x1013, dev=0x6003) at 5.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1c10-0x1c1f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1c20-0x1c3f irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 11509MB <IBM-DARA-212000> [24944/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 1 pccard: card removed, slot 1 pccard: card inserted, slot 1 machine i386 cpu I686_CPU ident A20m maxusers 0 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # output. Adds ~128k to driver. # output. Adds ~215k to driver. device isa device pci device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device scbus # SCSI bus (required) device da # Direct Access (disks) device pass # Passthrough device (direct SCSI access) device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? options VESA pseudo-device splash device sc0 at isa? flags 0x100 options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at nexus? port IO_NPX irq 13 device apm0 at nexus? disable flags 0x20 # Advanced Power Management device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device ed1 at pcic? port 0x300 irq 11 iomem 0xd8000 device ex device ep device awi device wi device an pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device bpf #Berkeley packet filter device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020908134856.A19401>