Date: Fri, 26 Jun 2009 16:25:35 GMT From: Alexander Motin <mav@FreeBSD.org> To: Perforce Change Reviews <perforce@freebsd.org> Subject: PERFORCE change 165257 for review Message-ID: <200906261625.n5QGPZwB034709@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=165257 Change 165257 by mav@mav_mavbook on 2009/06/26 16:25:14 IFC Affected files ... .. //depot/projects/scottl-camlock/src/UPDATING#7 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/CHANGES#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/KNOWN-DEFECTS#1 branch .. //depot/projects/scottl-camlock/src/contrib/bind9/bin/check/named-checkzone.c#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.8#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.c#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.docbook#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.html#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssectool.c#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM-book.xml#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM.ch06.html#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM.ch07.html#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM.ch08.html#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM.ch09.html#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM.html#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.dig.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.dnssec-dsfromkey.html#2 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.dnssec-keyfromlabel.html#2 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.dnssec-keygen.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.dnssec-signzone.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.host.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.named-checkconf.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.named-checkzone.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.named.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.nsupdate.html#2 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.rndc-confgen.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.rndc.conf.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/man.rndc.html#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/bind9/api#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/bind9/check.c#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/dns/api#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/dns/dnssec.c#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/dns/include/dns/dnssec.h#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/dns/include/dns/keyvalues.h#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/dns/nsec3.c#2 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/dns/resolver.c#4 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/lib/isc/ia64/include/isc/atomic.h#3 integrate .. //depot/projects/scottl-camlock/src/contrib/bind9/version#4 integrate .. //depot/projects/scottl-camlock/src/etc/network.subr#5 integrate .. //depot/projects/scottl-camlock/src/etc/rc.d/NETWORKING#4 integrate .. //depot/projects/scottl-camlock/src/etc/rc.d/ipfw#5 integrate .. //depot/projects/scottl-camlock/src/etc/rc.d/netif#5 integrate .. //depot/projects/scottl-camlock/src/etc/rc.d/pf#6 integrate .. //depot/projects/scottl-camlock/src/etc/rc.d/pflog#5 integrate .. //depot/projects/scottl-camlock/src/etc/rc.d/pfsync#5 integrate .. //depot/projects/scottl-camlock/src/lib/libc/posix1e/acl_get.c#4 integrate .. //depot/projects/scottl-camlock/src/lib/libc/posix1e/acl_set.c#4 integrate .. //depot/projects/scottl-camlock/src/lib/libc/stdtime/strptime.c#2 integrate .. //depot/projects/scottl-camlock/src/lib/libjail/jail.c#2 integrate .. //depot/projects/scottl-camlock/src/sbin/ipfw/ipfw.8#5 integrate .. //depot/projects/scottl-camlock/src/share/doc/bind9/Makefile#4 integrate .. //depot/projects/scottl-camlock/src/share/misc/bsd-family-tree#3 integrate .. //depot/projects/scottl-camlock/src/sys/amd64/amd64/intr_machdep.c#17 integrate .. //depot/projects/scottl-camlock/src/sys/amd64/include/intr_machdep.h#16 integrate .. //depot/projects/scottl-camlock/src/sys/amd64/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/arm/at91/if_ate.c#16 integrate .. //depot/projects/scottl-camlock/src/sys/arm/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/arm/xscale/ixp425/if_npe.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/boot/i386/libi386/biosdisk.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/compat/ndis/subr_usbd.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ae/if_ae.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/age/if_age.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/alc/if_alc.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ale/if_ale.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/asmc/asmc.c#4 integrate .. //depot/projects/scottl-camlock/src/sys/dev/asmc/asmcvar.h#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ath/if_ath.c#26 integrate .. //depot/projects/scottl-camlock/src/sys/dev/bce/if_bce.c#14 integrate .. //depot/projects/scottl-camlock/src/sys/dev/bfe/if_bfe.c#14 integrate .. //depot/projects/scottl-camlock/src/sys/dev/bge/if_bge.c#22 integrate .. //depot/projects/scottl-camlock/src/sys/dev/bm/if_bm.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/cas/if_cas.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/cs/if_cs.c#9 integrate .. //depot/projects/scottl-camlock/src/sys/dev/cxgb/cxgb_sge.c#14 integrate .. //depot/projects/scottl-camlock/src/sys/dev/cxgb/sys/mvec.h#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/cxgb/sys/uipc_mvec.c#9 integrate .. //depot/projects/scottl-camlock/src/sys/dev/dc/if_dc.c#13 integrate .. //depot/projects/scottl-camlock/src/sys/dev/de/if_de.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/drm/i915_dma.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/dev/e1000/if_em.c#6 integrate .. //depot/projects/scottl-camlock/src/sys/dev/e1000/if_igb.c#6 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ed/if_ed.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/dev/et/if_et.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ex/if_ex.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/fe/if_fe.c#9 integrate .. //depot/projects/scottl-camlock/src/sys/dev/fxp/if_fxp.c#21 integrate .. //depot/projects/scottl-camlock/src/sys/dev/gem/if_gem.c#13 integrate .. //depot/projects/scottl-camlock/src/sys/dev/hme/if_hme.c#12 integrate .. //depot/projects/scottl-camlock/src/sys/dev/hwpmc/hwpmc_logging.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/hwpmc/hwpmc_mod.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ie/if_ie.c#6 integrate .. //depot/projects/scottl-camlock/src/sys/dev/if_ndis/if_ndis.c#17 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ixgb/if_ixgb.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ixgbe/ixgbe.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/jme/if_jme.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/le/lance.c#5 integrate .. //depot/projects/scottl-camlock/src/sys/dev/lge/if_lge.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/dev/malo/if_malo.c#5 integrate .. //depot/projects/scottl-camlock/src/sys/dev/mge/if_mge.c#4 integrate .. //depot/projects/scottl-camlock/src/sys/dev/msk/if_msk.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/dev/mxge/if_mxge.c#18 integrate .. //depot/projects/scottl-camlock/src/sys/dev/my/if_my.c#12 integrate .. //depot/projects/scottl-camlock/src/sys/dev/nfe/if_nfe.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/dev/nge/if_nge.c#12 integrate .. //depot/projects/scottl-camlock/src/sys/dev/nve/if_nve.c#10 integrate .. //depot/projects/scottl-camlock/src/sys/dev/nxge/if_nxge.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/pcn/if_pcn.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/pdq/pdq_ifsubr.c#5 integrate .. //depot/projects/scottl-camlock/src/sys/dev/re/if_re.c#24 integrate .. //depot/projects/scottl-camlock/src/sys/dev/sf/if_sf.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/sis/if_sis.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/sk/if_sk.c#14 integrate .. //depot/projects/scottl-camlock/src/sys/dev/sn/if_sn.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/snc/dp83932.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ste/if_ste.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/stge/if_stge.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/dev/ti/if_ti.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/dev/tl/if_tl.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/dev/tsec/if_tsec.c#5 integrate .. //depot/projects/scottl-camlock/src/sys/dev/tx/if_tx.c#9 integrate .. //depot/projects/scottl-camlock/src/sys/dev/txp/if_txp.c#12 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/net/if_aue.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/net/if_axe.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/net/if_cue.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/net/if_kue.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/net/if_rue.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/net/if_udav.c#7 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/wlan/if_upgt.c#5 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/wlan/if_urtw.c#4 integrate .. //depot/projects/scottl-camlock/src/sys/dev/usb/wlan/if_zyd.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/dev/vge/if_vge.c#12 integrate .. //depot/projects/scottl-camlock/src/sys/dev/vr/if_vr.c#4 integrate .. //depot/projects/scottl-camlock/src/sys/dev/wb/if_wb.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/dev/wi/if_wi.c#19 integrate .. //depot/projects/scottl-camlock/src/sys/dev/wl/if_wl.c#9 integrate .. //depot/projects/scottl-camlock/src/sys/dev/xe/if_xe.c#9 integrate .. //depot/projects/scottl-camlock/src/sys/dev/xl/if_xl.c#4 integrate .. //depot/projects/scottl-camlock/src/sys/i386/i386/intr_machdep.c#17 integrate .. //depot/projects/scottl-camlock/src/sys/i386/include/intr_machdep.h#16 integrate .. //depot/projects/scottl-camlock/src/sys/i386/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/ia64/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/kern/kern_mbuf.c#16 integrate .. //depot/projects/scottl-camlock/src/sys/mips/adm5120/if_admsw.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/mips/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/net/if.c#27 integrate .. //depot/projects/scottl-camlock/src/sys/net/if_stf.c#17 integrate .. //depot/projects/scottl-camlock/src/sys/net/if_tun.c#19 integrate .. //depot/projects/scottl-camlock/src/sys/net/if_var.h#20 integrate .. //depot/projects/scottl-camlock/src/sys/net/netisr.c#10 integrate .. //depot/projects/scottl-camlock/src/sys/netgraph/ng_eiface.c#13 integrate .. //depot/projects/scottl-camlock/src/sys/netgraph/ng_ether.c#13 integrate .. //depot/projects/scottl-camlock/src/sys/netgraph/ng_iface.c#12 integrate .. //depot/projects/scottl-camlock/src/sys/netinet/ip_divert.c#20 integrate .. //depot/projects/scottl-camlock/src/sys/netinet/ipfw/ip_fw2.c#3 integrate .. //depot/projects/scottl-camlock/src/sys/netinet/ipfw/ip_fw_nat.c#2 integrate .. //depot/projects/scottl-camlock/src/sys/pci/if_rl.c#14 integrate .. //depot/projects/scottl-camlock/src/sys/powerpc/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/sparc64/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/sun4v/conf/GENERIC#11 integrate .. //depot/projects/scottl-camlock/src/sys/sun4v/include/vm.h#1 branch .. //depot/projects/scottl-camlock/src/sys/sun4v/sun4v/pmap.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/ufs/ufs/ufs_dirhash.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm.h#8 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_contig.c#18 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_extern.h#11 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_fault.c#20 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_kern.c#11 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_map.c#19 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_map.h#10 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_mmap.c#15 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_object.c#17 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_object.h#10 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_pageout.c#17 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_pager.c#8 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_pager.h#6 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_phys.c#6 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vm_phys.h#3 integrate .. //depot/projects/scottl-camlock/src/sys/vm/vnode_pager.c#15 integrate .. //depot/projects/scottl-camlock/src/usr.sbin/sysinstall/help/usage.hlp#2 integrate Differences ... ==== //depot/projects/scottl-camlock/src/UPDATING#7 (text+ko) ==== @@ -80,12 +80,6 @@ rebuilt. Bump __FreeBSD_version to 800096. -20090531: - For those who use ipfw and especially pf, those two firewalls - are now started BEFORE the network is initialized (i.e., before - rc.d/netif). Please review your rules to make sure that your - interfaces will be properly described. - 20090530: Remove the tunable/sysctl debug.mpsafevfs as its initial purpose is no more valid. @@ -1624,4 +1618,4 @@ Contact Warner Losh if you have any questions about your use of this document. -$FreeBSD: src/UPDATING,v 1.621 2009/06/22 17:48:16 bz Exp $ +$FreeBSD: src/UPDATING,v 1.622 2009/06/26 01:10:10 dougb Exp $ ==== //depot/projects/scottl-camlock/src/contrib/bind9/CHANGES#4 (text+ko) ==== @@ -1,4 +1,23 @@ + --- 9.6.1 released --- + +2607. [bug] named could incorrectly delete NSEC3 records for + empty nodes when processing a update request. + [RT #19749] + +2606. [bug] "delegation-only" was not being accepted in + delegation-only type zones. [RT #19717] + +2605. [bug] Accept DS responses from delegation only zones. + [RT # 19296] + +2603. [port] win32: handle .exe extension of named-checkzone and + named-comilezone argv[0] names under windows. + [RT #19767] + +2602. [port] win32: fix debugging command line build of libisccfg. + [RT #19767] + --- 9.6.1rc1 released --- 2599. [bug] Address rapid memory growth when validation fails. ==== //depot/projects/scottl-camlock/src/contrib/bind9/bin/check/named-checkzone.c#4 (text+ko) ==== @@ -15,7 +15,7 @@ * PERFORMANCE OF THIS SOFTWARE. */ -/* $Id: named-checkzone.c,v 1.51.34.2 2009/02/16 23:47:15 tbox Exp $ */ +/* $Id: named-checkzone.c,v 1.51.34.3 2009/05/29 02:17:43 marka Exp $ */ /*! \file */ @@ -123,9 +123,13 @@ */ if (strncmp(prog_name, "lt-", 3) == 0) prog_name += 3; - if (strcmp(prog_name, "named-checkzone") == 0) + +#define PROGCMP(X) \ + (strcasecmp(prog_name, X) == 0 || strcasecmp(prog_name, X ".exe") == 0) + + if (PROGCMP("named-checkzone")) progmode = progmode_check; - else if (strcmp(prog_name, "named-compilezone") == 0) + else if (PROGCMP("named-compilezone")) progmode = progmode_compile; else INSIST(0); ==== //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.8#4 (text+ko) ==== @@ -1,4 +1,4 @@ -.\" Copyright (C) 2004-2008 Internet Systems Consortium, Inc. ("ISC") +.\" Copyright (C) 2004-2009 Internet Systems Consortium, Inc. ("ISC") .\" Copyright (C) 2000-2003 Internet Software Consortium. .\" .\" Permission to use, copy, modify, and distribute this software for any @@ -13,275 +13,163 @@ .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR .\" PERFORMANCE OF THIS SOFTWARE. .\" -.\" $Id: dnssec-signzone.8,v 1.47 2008/10/15 01:11:35 tbox Exp $ +.\" $Id: dnssec-signzone.8,v 1.47.44.4 2009/06/09 01:47:19 each Exp $ .\" .hy 0 .ad l -.\" Title: dnssec\-signzone -.\" Author: -.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>; -.\" Date: June 30, 2000 -.\" Manual: BIND9 -.\" Source: BIND9 -.\" -.TH "DNSSEC\-SIGNZONE" "8" "June 30, 2000" "BIND9" "BIND9" -.\" disable hyphenation -.nh -.\" disable justification (adjust text to left margin only) -.ad l -.SH "NAME" -dnssec\-signzone \- DNSSEC zone signing tool +.\"Generated by db2man.xsl. Don't modify this, modify the source. +.de Sh \" Subsection +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Ip \" List item +.br +.ie \\n(.$>=3 .ne \\$3 +.el .ne 3 +.IP "\\$1" \\$2 +.. +.TH "DNSSEC-SIGNZONE" 8 "June 08, 2009" "" "" +.SH NAME +dnssec-signzone \- DNSSEC zone signing tool .SH "SYNOPSIS" .HP 16 -\fBdnssec\-signzone\fR [\fB\-a\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-d\ \fR\fB\fIdirectory\fR\fR] [\fB\-e\ \fR\fB\fIend\-time\fR\fR] [\fB\-f\ \fR\fB\fIoutput\-file\fR\fR] [\fB\-g\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkey\fR\fR] [\fB\-l\ \fR\fB\fIdomain\fR\fR] [\fB\-i\ \fR\fB\fIinterval\fR\fR] [\fB\-I\ \fR\fB\fIinput\-format\fR\fR] [\fB\-j\ \fR\fB\fIjitter\fR\fR] [\fB\-N\ \fR\fB\fIsoa\-serial\-format\fR\fR] [\fB\-o\ \fR\fB\fIorigin\fR\fR] [\fB\-O\ \fR\fB\fIoutput\-format\fR\fR] [\fB\-p\fR] [\fB\-r\ \fR\fB\fIrandomdev\fR\fR] [\fB\-s\ \fR\fB\fIstart\-time\fR\fR] [\fB\-t\fR] [\fB\-v\ \fR\fB\fIlevel\fR\fR] [\fB\-z\fR] [\fB\-3\ \fR\fB\fIsalt\fR\fR] [\fB\-H\ \fR\fB\fIiterations\fR\fR] [\fB\-A\fR] {zonefile} [key...] +\fBdnssec\-signzone\fR [\fB\-a\fR] [\fB\-c\ \fIclass\fR\fR] [\fB\-d\ \fIdirectory\fR\fR] [\fB\-e\ \fIend\-time\fR\fR] [\fB\-f\ \fIoutput\-file\fR\fR] [\fB\-g\fR] [\fB\-h\fR] [\fB\-k\ \fIkey\fR\fR] [\fB\-l\ \fIdomain\fR\fR] [\fB\-i\ \fIinterval\fR\fR] [\fB\-I\ \fIinput\-format\fR\fR] [\fB\-j\ \fIjitter\fR\fR] [\fB\-N\ \fIsoa\-serial\-format\fR\fR] [\fB\-o\ \fIorigin\fR\fR] [\fB\-O\ \fIoutput\-format\fR\fR] [\fB\-p\fR] [\fB\-r\ \fIrandomdev\fR\fR] [\fB\-s\ \fIstart\-time\fR\fR] [\fB\-t\fR] [\fB\-v\ \fIlevel\fR\fR] [\fB\-z\fR] [\fB\-3\ \fIsalt\fR\fR] [\fB\-H\ \fIiterations\fR\fR] [\fB\-A\fR] {zonefile} [key...] .SH "DESCRIPTION" .PP -\fBdnssec\-signzone\fR -signs a zone. It generates NSEC and RRSIG records and produces a signed version of the zone. The security status of delegations from the signed zone (that is, whether the child zones are secure or not) is determined by the presence or absence of a -\fIkeyset\fR -file for each child zone. +\fBdnssec\-signzone\fR signs a zone\&. It generates NSEC and RRSIG records and produces a signed version of the zone\&. The security status of delegations from the signed zone (that is, whether the child zones are secure or not) is determined by the presence or absence of a \fIkeyset\fR file for each child zone\&. .SH "OPTIONS" -.PP +.TP \-a -.RS 4 -Verify all generated signatures. -.RE -.PP +Verify all generated signatures\&. +.TP \-c \fIclass\fR -.RS 4 -Specifies the DNS class of the zone. -.RE -.PP +Specifies the DNS class of the zone\&. +.TP \-k \fIkey\fR -.RS 4 -Treat specified key as a key signing key ignoring any key flags. This option may be specified multiple times. -.RE -.PP +Treat specified key as a key signing key ignoring any key flags\&. This option may be specified multiple times\&. +.TP \-l \fIdomain\fR -.RS 4 -Generate a DLV set in addition to the key (DNSKEY) and DS sets. The domain is appended to the name of the records. -.RE -.PP +Generate a DLV set in addition to the key (DNSKEY) and DS sets\&. The domain is appended to the name of the records\&. +.TP \-d \fIdirectory\fR -.RS 4 -Look for -\fIkeyset\fR -files in -\fBdirectory\fR -as the directory -.RE -.PP +Look for \fIkeyset\fR files in \fBdirectory\fR as the directory +.TP \-g -.RS 4 -Generate DS records for child zones from keyset files. Existing DS records will be removed. -.RE -.PP +Generate DS records for child zones from keyset files\&. Existing DS records will be removed\&. +.TP \-s \fIstart\-time\fR -.RS 4 -Specify the date and time when the generated RRSIG records become valid. This can be either an absolute or relative time. An absolute start time is indicated by a number in YYYYMMDDHHMMSS notation; 20000530144500 denotes 14:45:00 UTC on May 30th, 2000. A relative start time is indicated by +N, which is N seconds from the current time. If no -\fBstart\-time\fR -is specified, the current time minus 1 hour (to allow for clock skew) is used. -.RE -.PP +Specify the date and time when the generated RRSIG records become valid\&. This can be either an absolute or relative time\&. An absolute start time is indicated by a number in YYYYMMDDHHMMSS notation; 20000530144500 denotes 14:45:00 UTC on May 30th, 2000\&. A relative start time is indicated by +N, which is N seconds from the current time\&. If no \fBstart\-time\fR is specified, the current time minus 1 hour (to allow for clock skew) is used\&. +.TP \-e \fIend\-time\fR -.RS 4 -Specify the date and time when the generated RRSIG records expire. As with -\fBstart\-time\fR, an absolute time is indicated in YYYYMMDDHHMMSS notation. A time relative to the start time is indicated with +N, which is N seconds from the start time. A time relative to the current time is indicated with now+N. If no -\fBend\-time\fR -is specified, 30 days from the start time is used as a default. -.RE -.PP +Specify the date and time when the generated RRSIG records expire\&. As with \fBstart\-time\fR, an absolute time is indicated in YYYYMMDDHHMMSS notation\&. A time relative to the start time is indicated with +N, which is N seconds from the start time\&. A time relative to the current time is indicated with now+N\&. If no \fBend\-time\fR is specified, 30 days from the start time is used as a default\&. +.TP \-f \fIoutput\-file\fR -.RS 4 -The name of the output file containing the signed zone. The default is to append -\fI.signed\fR -to the input filename. -.RE -.PP +The name of the output file containing the signed zone\&. The default is to append \fI\&.signed\fR to the input filename\&. +.TP \-h -.RS 4 -Prints a short summary of the options and arguments to -\fBdnssec\-signzone\fR. -.RE -.PP +Prints a short summary of the options and arguments to \fBdnssec\-signzone\fR\&. +.TP \-i \fIinterval\fR -.RS 4 -When a previously\-signed zone is passed as input, records may be resigned. The -\fBinterval\fR -option specifies the cycle interval as an offset from the current time (in seconds). If a RRSIG record expires after the cycle interval, it is retained. Otherwise, it is considered to be expiring soon, and it will be replaced. -.sp -The default cycle interval is one quarter of the difference between the signature end and start times. So if neither -\fBend\-time\fR -or -\fBstart\-time\fR -are specified, -\fBdnssec\-signzone\fR -generates signatures that are valid for 30 days, with a cycle interval of 7.5 days. Therefore, if any existing RRSIG records are due to expire in less than 7.5 days, they would be replaced. -.RE -.PP +When a previously\-signed zone is passed as input, records may be resigned\&. The \fBinterval\fR option specifies the cycle interval as an offset from the current time (in seconds)\&. If a RRSIG record expires after the cycle interval, it is retained\&. Otherwise, it is considered to be expiring soon, and it will be replaced\&. +The default cycle interval is one quarter of the difference between the signature end and start times\&. So if neither \fBend\-time\fR or \fBstart\-time\fR are specified, \fBdnssec\-signzone\fR generates signatures that are valid for 30 days, with a cycle interval of 7\&.5 days\&. Therefore, if any existing RRSIG records are due to expire in less than 7\&.5 days, they would be replaced\&. +.TP \-I \fIinput\-format\fR -.RS 4 -The format of the input zone file. Possible formats are -\fB"text"\fR -(default) and -\fB"raw"\fR. This option is primarily intended to be used for dynamic signed zones so that the dumped zone file in a non\-text format containing updates can be signed directly. The use of this option does not make much sense for non\-dynamic zones. -.RE -.PP +The format of the input zone file\&. Possible formats are \fB"text"\fR (default) and \fB"raw"\fR\&. This option is primarily intended to be used for dynamic signed zones so that the dumped zone file in a non\-text format containing updates can be signed directly\&. The use of this option does not make much sense for non\-dynamic zones\&. +.TP \-j \fIjitter\fR -.RS 4 -When signing a zone with a fixed signature lifetime, all RRSIG records issued at the time of signing expires simultaneously. If the zone is incrementally signed, i.e. a previously\-signed zone is passed as input to the signer, all expired signatures have to be regenerated at about the same time. The -\fBjitter\fR -option specifies a jitter window that will be used to randomize the signature expire time, thus spreading incremental signature regeneration over time. -.sp -Signature lifetime jitter also to some extent benefits validators and servers by spreading out cache expiration, i.e. if large numbers of RRSIGs don't expire at the same time from all caches there will be less congestion than if all validators need to refetch at mostly the same time. -.RE -.PP +When signing a zone with a fixed signature lifetime, all RRSIG records issued at the time of signing expires simultaneously\&. If the zone is incrementally signed, i\&.e\&. a previously\-signed zone is passed as input to the signer, all expired signatures have to be regenerated at about the same time\&. The \fBjitter\fR option specifies a jitter window that will be used to randomize the signature expire time, thus spreading incremental signature regeneration over time\&. +Signature lifetime jitter also to some extent benefits validators and servers by spreading out cache expiration, i\&.e\&. if large numbers of RRSIGs don't expire at the same time from all caches there will be less congestion than if all validators need to refetch at mostly the same time\&. +.TP \-n \fIncpus\fR -.RS 4 -Specifies the number of threads to use. By default, one thread is started for each detected CPU. -.RE -.PP +Specifies the number of threads to use\&. By default, one thread is started for each detected CPU\&. +.TP \-N \fIsoa\-serial\-format\fR -.RS 4 -The SOA serial number format of the signed zone. Possible formats are +The SOA serial number format of the signed zone\&. Possible formats are \fB"keep"\fR (default), \fB"increment"\fR and \fB"unixtime"\fR\&. +.RS +.TP \fB"keep"\fR -(default), +Do not modify the SOA serial number\&. +.TP \fB"increment"\fR -and -\fB"unixtime"\fR. -.RS 4 -.PP -\fB"keep"\fR -.RS 4 -Do not modify the SOA serial number. -.RE -.PP -\fB"increment"\fR -.RS 4 -Increment the SOA serial number using RFC 1982 arithmetics. -.RE -.PP +Increment the SOA serial number using RFC 1982 arithmetics\&. +.TP \fB"unixtime"\fR -.RS 4 -Set the SOA serial number to the number of seconds since epoch. +Set the SOA serial number to the number of seconds since epoch\&. .RE -.RE -.RE -.PP +.IP +.TP \-o \fIorigin\fR -.RS 4 -The zone origin. If not specified, the name of the zone file is assumed to be the origin. -.RE -.PP +The zone origin\&. If not specified, the name of the zone file is assumed to be the origin\&. +.TP \-O \fIoutput\-format\fR -.RS 4 -The format of the output file containing the signed zone. Possible formats are -\fB"text"\fR -(default) and -\fB"raw"\fR. -.RE -.PP +The format of the output file containing the signed zone\&. Possible formats are \fB"text"\fR (default) and \fB"raw"\fR\&. +.TP \-p -.RS 4 -Use pseudo\-random data when signing the zone. This is faster, but less secure, than using real random data. This option may be useful when signing large zones or when the entropy source is limited. -.RE -.PP +Use pseudo\-random data when signing the zone\&. This is faster, but less secure, than using real random data\&. This option may be useful when signing large zones or when the entropy source is limited\&. +.TP \-r \fIrandomdev\fR -.RS 4 -Specifies the source of randomness. If the operating system does not provide a -\fI/dev/random\fR -or equivalent device, the default source of randomness is keyboard input. -\fIrandomdev\fR -specifies the name of a character device or file containing random data to be used instead of the default. The special value -\fIkeyboard\fR -indicates that keyboard input should be used. -.RE -.PP +Specifies the source of randomness\&. If the operating system does not provide a \fI/dev/random\fR or equivalent device, the default source of randomness is keyboard input\&. \fIrandomdev\fR specifies the name of a character device or file containing random data to be used instead of the default\&. The special value \fIkeyboard\fR indicates that keyboard input should be used\&. +.TP \-t -.RS 4 -Print statistics at completion. -.RE -.PP +Print statistics at completion\&. +.TP \-v \fIlevel\fR -.RS 4 -Sets the debugging level. -.RE -.PP +Sets the debugging level\&. +.TP \-z -.RS 4 -Ignore KSK flag on key when determining what to sign. -.RE -.PP +Ignore KSK flag on key when determining what to sign\&. +.TP \-3 \fIsalt\fR -.RS 4 -Generate a NSEC3 chain with the given hex encoded salt. A dash (\fIsalt\fR) can be used to indicate that no salt is to be used when generating the NSEC3 chain. -.RE -.PP +Generate a NSEC3 chain with the given hex encoded salt\&. A dash (\fIsalt\fR) can be used to indicate that no salt is to be used when generating the NSEC3 chain\&. +.TP \-H \fIiterations\fR -.RS 4 -When generating a NSEC3 chain use this many interations. The default is 100. -.RE -.PP +When generating a NSEC3 chain use this many interations\&. The default is 100\&. +.TP \-A -.RS 4 -When generating a NSEC3 chain set the OPTOUT flag on all NSEC3 records and do not generate NSEC3 records for insecure delegations. -.RE -.PP +When generating a NSEC3 chain set the OPTOUT flag on all NSEC3 records and do not generate NSEC3 records for insecure delegations\&. +.TP zonefile -.RS 4 -The file containing the zone to be signed. -.RE -.PP +The file containing the zone to be signed\&. +.TP key -.RS 4 -Specify which keys should be used to sign the zone. If no keys are specified, then the zone will be examined for DNSKEY records at the zone apex. If these are found and there are matching private keys, in the current directory, then these will be used for signing. -.RE +Specify which keys should be used to sign the zone\&. If no keys are specified, then the zone will be examined for DNSKEY records at the zone apex\&. If these are found and there are matching private keys, in the current directory, then these will be used for signing\&. .SH "EXAMPLE" .PP -The following command signs the -\fBexample.com\fR -zone with the DSA key generated by -\fBdnssec\-keygen\fR -(Kexample.com.+003+17247). The zone's keys must be in the master file (\fIdb.example.com\fR). This invocation looks for -\fIkeyset\fR -files, in the current directory, so that DS records can be generated from them (\fB\-g\fR). -.sp -.RS 4 +The following command signs the \fBexample\&.com\fR zone with the DSA key generated by \fBdnssec\-keygen\fR (Kexample\&.com\&.+003+17247)\&. The zone's keys must be in the master file (\fIdb\&.example\&.com\fR)\&. This invocation looks for \fIkeyset\fR files, in the current directory, so that DS records can be generated from them (\fB\-g\fR)\&. .nf -% dnssec\-signzone \-g \-o example.com db.example.com \\ -Kexample.com.+003+17247 -db.example.com.signed +% dnssec\-signzone \-g \-o example\&.com db\&.example\&.com \\ +Kexample\&.com\&.+003+17247 +db\&.example\&.com\&.signed % .fi -.RE .PP -In the above example, -\fBdnssec\-signzone\fR -creates the file -\fIdb.example.com.signed\fR. This file should be referenced in a zone statement in a -\fInamed.conf\fR -file. +In the above example, \fBdnssec\-signzone\fR creates the file \fIdb\&.example\&.com\&.signed\fR\&. This file should be referenced in a zone statement in a \fInamed\&.conf\fR file\&. .PP -This example re\-signs a previously signed zone with default parameters. The private keys are assumed to be in the current directory. -.sp -.RS 4 +This example re\-signs a previously signed zone with default parameters\&. The private keys are assumed to be in the current directory\&. .nf -% cp db.example.com.signed db.example.com -% dnssec\-signzone \-o example.com db.example.com -db.example.com.signed +% cp db\&.example\&.com\&.signed db\&.example\&.com +% dnssec\-signzone \-o example\&.com db\&.example\&.com +db\&.example\&.com\&.signed % .fi -.RE +.SH "KNOWN BUGS" +.PP + \fBdnssec\-signzone\fR was designed so that it could sign a zone partially, using only a subset of the DNSSEC keys needed to produce a fully\-signed zone\&. This permits a zone administrator, for example, to sign a zone with one key on one machine, move the resulting partially\-signed zone to a second machine, and sign it again with a second key\&. +.PP +An unfortunate side\-effect of this flexibility is that \fBdnssec\-signzone\fR does not check to make sure it's signing a zone with any valid keys at all\&. An attempt to sign a zone without any keys will appear to succeed, producing a "signed" zone with no signatures\&. There is no warning issued when a zone is not fully signed\&. +.PP +This will be corrected in a future release\&. In the meantime, ISC recommends examining the output of \fBdnssec\-signzone\fR to confirm that the zone is properly signed by all keys before using it\&. .SH "SEE ALSO" .PP -\fBdnssec\-keygen\fR(8), -BIND 9 Administrator Reference Manual, -RFC 4033. +\fBdnssec\-keygen\fR(8), BIND 9 Administrator Reference Manual, RFC 4033\&. .SH "AUTHOR" .PP -Internet Systems Consortium -.SH "COPYRIGHT" -Copyright \(co 2004\-2008 Internet Systems Consortium, Inc. ("ISC") -.br -Copyright \(co 2000\-2003 Internet Software Consortium. -.br +Internet Systems Consortium ==== //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.c#4 (text+ko) ==== @@ -29,7 +29,7 @@ * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* $Id: dnssec-signzone.c,v 1.209.12.3 2009/01/18 23:25:15 marka Exp $ */ +/* $Id: dnssec-signzone.c,v 1.209.12.8 2009/06/08 22:23:06 each Exp $ */ /*! \file */ ==== //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.docbook#4 (text+ko) ==== @@ -2,7 +2,7 @@ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [<!ENTITY mdash "—">]> <!-- - - Copyright (C) 2004-2008 Internet Systems Consortium, Inc. ("ISC") + - Copyright (C) 2004-2009 Internet Systems Consortium, Inc. ("ISC") - Copyright (C) 2000-2003 Internet Software Consortium. - - Permission to use, copy, modify, and/or distribute this software for any @@ -18,10 +18,10 @@ - PERFORMANCE OF THIS SOFTWARE. --> -<!-- $Id: dnssec-signzone.docbook,v 1.31 2008/10/14 14:28:25 jreed Exp $ --> +<!-- $Id: dnssec-signzone.docbook,v 1.31.44.6 2009/06/09 01:47:19 each Exp $ --> <refentry id="man.dnssec-signzone"> <refentryinfo> - <date>June 30, 2000</date> + <date>June 08, 2009</date> </refentryinfo> <refmeta> @@ -42,6 +42,7 @@ <year>2006</year> <year>2007</year> <year>2008</year> + <year>2009</year> <holder>Internet Systems Consortium, Inc. ("ISC")</holder> </copyright> <copyright> @@ -490,6 +491,33 @@ </refsect1> <refsect1> + <title>KNOWN BUGS</title> + <para> + <command>dnssec-signzone</command> was designed so that it could + sign a zone partially, using only a subset of the DNSSEC keys + needed to produce a fully-signed zone. This permits a zone + administrator, for example, to sign a zone with one key on one + machine, move the resulting partially-signed zone to a second + machine, and sign it again with a second key. + </para> + <para> + An unfortunate side-effect of this flexibility is that + <command>dnssec-signzone</command> does not check to make sure + it's signing a zone with any valid keys at all. An attempt to + sign a zone without any keys will appear to succeed, producing + a "signed" zone with no signatures. There is no warning issued + when a zone is not fully signed. + </para> + + <para> + This will be corrected in a future release. In the meantime, ISC + recommends examining the output of <command>dnssec-signzone</command> + to confirm that the zone is properly signed by all keys before + using it. + </para> + </refsect1> + + <refsect1> <title>SEE ALSO</title> <para><citerefentry> <refentrytitle>dnssec-keygen</refentrytitle><manvolnum>8</manvolnum> ==== //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssec-signzone.html#4 (text+ko) ==== @@ -1,5 +1,5 @@ <!-- - - Copyright (C) 2004-2008 Internet Systems Consortium, Inc. ("ISC") + - Copyright (C) 2004-2009 Internet Systems Consortium, Inc. ("ISC") - Copyright (C) 2000-2003 Internet Software Consortium. - - Permission to use, copy, modify, and distribute this software for any @@ -14,12 +14,12 @@ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - PERFORMANCE OF THIS SOFTWARE. --> -<!-- $Id: dnssec-signzone.html,v 1.33 2008/10/15 01:11:35 tbox Exp $ --> +<!-- $Id: dnssec-signzone.html,v 1.33.44.4 2009/06/09 01:47:19 each Exp $ --> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>dnssec-signzone</title> -<meta name="generator" content="DocBook XSL Stylesheets V1.71.1"> +<meta name="generator" content="DocBook XSL Stylesheets V1.67.2"> </head> <body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en"> <a name="man.dnssec-signzone"></a><div class="titlepage"></div> @@ -32,7 +32,7 @@ <div class="cmdsynopsis"><p><code class="command">dnssec-signzone</code> [<code class="option">-a</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-d <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-e <em class="replaceable"><code>end-time</code></em></code>] [<code class="option">-f <em class="replaceable"><code>output-file</code></em></code>] [<code class="option">-g</code>] [<code class="option">-h</code>] [<code class="option">-k <em class="replaceable"><code>key</code></em></code>] [<code class="option">-l <em class="replaceable"><code>domain</code></em></code>] [<code class="option">-i <em class="replaceable"><code>interval</code></em></code>] [<code class="option">-I <em class="replaceable"><code>input-format</code></em></code>] [<code class="option">-j <em class="replaceable"><code>jitter</code></em></code>] [<code class="option">-N <em class="replaceable"><code>soa-seria l-format</code></em></code>] [<code class="option">-o <em class="replaceable"><code>origin</code></em></code>] [<code class="option">-O <em class="replaceable"><code>output-format</code></em></code>] [<code class="option">-p</code>] [<code class="option">-r <em class="replaceable"><code>randomdev</code></em></code>] [<code class="option">-s <em class="replaceable"><code>start-time</code></em></code>] [<code class="option">-t</code>] [<code class="option">-v <em class="replaceable"><code>level</code></em></code>] [<code class="option">-z</code>] [<code class="option">-3 <em class="replaceable"><code>salt</code></em></code>] [<code class="option">-H <em class="replaceable"><code>iterations</code></em></code>] [<code class="option">-A</code>] {zonefile} [key...]</p></div> </div> <div class="refsect1" lang="en"> -<a name="id2543550"></a><h2>DESCRIPTION</h2> +<a name="id215236"></a><h2>DESCRIPTION</h2> <p><span><strong class="command">dnssec-signzone</strong></span> signs a zone. It generates NSEC and RRSIG records and produces a signed version of the @@ -43,7 +43,7 @@ </p> </div> <div class="refsect1" lang="en"> -<a name="id2543565"></a><h2>OPTIONS</h2> +<a name="id215253"></a><h2>OPTIONS</h2> <div class="variablelist"><dl> <dt><span class="term">-a</span></dt> <dd><p> @@ -258,7 +258,7 @@ </dl></div> </div> <div class="refsect1" lang="en"> -<a name="id2544404"></a><h2>EXAMPLE</h2> +<a name="id216044"></a><h2>EXAMPLE</h2> <p> The following command signs the <strong class="userinput"><code>example.com</code></strong> zone with the DSA key generated by <span><strong class="command">dnssec-keygen</strong></span> @@ -287,14 +287,39 @@ %</pre> </div> <div class="refsect1" lang="en"> -<a name="id2544523"></a><h2>SEE ALSO</h2> +<a name="id216098"></a><h2>KNOWN BUGS</h2> +<p> + <span><strong class="command">dnssec-signzone</strong></span> was designed so that it could + sign a zone partially, using only a subset of the DNSSEC keys + needed to produce a fully-signed zone. This permits a zone + administrator, for example, to sign a zone with one key on one + machine, move the resulting partially-signed zone to a second + machine, and sign it again with a second key. + </p> +<p> + An unfortunate side-effect of this flexibility is that + <span><strong class="command">dnssec-signzone</strong></span> does not check to make sure + it's signing a zone with any valid keys at all. An attempt to + sign a zone without any keys will appear to succeed, producing + a "signed" zone with no signatures. There is no warning issued + when a zone is not fully signed. + </p> +<p> + This will be corrected in a future release. In the meantime, ISC + recommends examining the output of <span><strong class="command">dnssec-signzone</strong></span> + to confirm that the zone is properly signed by all keys before + using it. + </p> +</div> +<div class="refsect1" lang="en"> +<a name="id216132"></a><h2>SEE ALSO</h2> <p><span class="citerefentry"><span class="refentrytitle">dnssec-keygen</span>(8)</span>, <em class="citetitle">BIND 9 Administrator Reference Manual</em>, <em class="citetitle">RFC 4033</em>. </p> </div> <div class="refsect1" lang="en"> -<a name="id2544548"></a><h2>AUTHOR</h2> +<a name="id216155"></a><h2>AUTHOR</h2> <p><span class="corpauthor">Internet Systems Consortium</span> </p> </div> ==== //depot/projects/scottl-camlock/src/contrib/bind9/bin/dnssec/dnssectool.c#4 (text+ko) ==== @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004, 2005, 2007 Internet Systems Consortium, Inc. ("ISC") + * Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC") * Copyright (C) 2000, 2001, 2003 Internet Software Consortium. * * Permission to use, copy, modify, and/or distribute this software for any @@ -15,7 +15,7 @@ * PERFORMANCE OF THIS SOFTWARE. */ -/* $Id: dnssectool.c,v 1.45 2007/06/19 23:46:59 tbox Exp $ */ +/* $Id: dnssectool.c,v 1.45.334.4 2009/06/08 23:47:00 tbox Exp $ */ /*! \file */ @@ -222,7 +222,7 @@ int usekeyboard = ISC_ENTROPY_KEYBOARDMAYBE; REQUIRE(ectx != NULL); - + if (*ectx == NULL) { result = isc_entropy_create(mctx, ectx); if (result != ISC_R_SUCCESS) ==== //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM-book.xml#4 (text+ko) ==== @@ -18,7 +18,7 @@ - PERFORMANCE OF THIS SOFTWARE. --> -<!-- File: $Id: Bv9ARM-book.xml,v 1.380.14.14 2009/04/02 15:30:12 jreed Exp $ --> +<!-- File: $Id: Bv9ARM-book.xml,v 1.380.14.15 2009/06/02 05:56:27 marka Exp $ --> <book xmlns:xi="http://www.w3.org/2001/XInclude">; <title>BIND 9 Administrator Reference Manual</title> @@ -4333,16 +4333,16 @@ <entry colname="1"> <para><command>delegation-only</command></para> </entry> - <entry colname="2"> - <para> - Delegation only. Logs queries that have - been forced to NXDOMAIN as the result of a - delegation-only zone or - a <command>delegation-only</command> in a - hint or stub zone declaration. - </para> - </entry> - </row> + <entry colname="2"> + <para> + Delegation only. Logs queries that have been + forced to NXDOMAIN as the result of a + delegation-only zone or a + <command>delegation-only</command> in a hint + or stub zone declaration. + </para> + </entry> + </row> <row rowsep="0"> <entry colname="1"> <para><command>edns-disabled</command></para> @@ -5116,17 +5116,45 @@ </listitem> </varlistentry> - <varlistentry> + <varlistentry id="root_delegation_only"> <term><command>root-delegation-only</command></term> <listitem> <para> - Turn on enforcement of delegation-only in TLDs (top level domains) and root zones - with an optional - exclude list. + Turn on enforcement of delegation-only in TLDs + (top level domains) and root zones with an optional + exclude list. </para> + <para> + DS queries are expected to be made to and be answered by + delegation only zones. Such queries and responses are + treated as a exception to delegation-only processing + and are not converted to NXDOMAIN responses provided + a CNAME is not discovered at the query name. + </para> + <para> + If a delegation only zone server also serves a child + zone it is not always possible to determine whether + a answer comes from the delegation only zone or the + child zone. SOA NS and DNSKEY records are apex + only records and a matching response that contains + these records or DS is treated as coming from a + child zone. RRSIG records are also examined to see + if they are signed by a child zone or not. The + authority section is also examined to see if there + is evidence that the answer is from the child zone. + Answers that are determined to be from a child zone + are not converted to NXDOMAIN responses. Despite + all these checks there is still a possibility of + false negatives when a child zone is being served. + </para> + <para> + Similarly false positives can arise from empty nodes + (no records at the name) in the delegation only zone + when the query type is not ANY. + </para> <para> - Note some TLDs are not delegation only (e.g. "DE", "LV", "US" - and "MUSEUM"). + Note some TLDs are not delegation only (e.g. "DE", "LV", + "US" and "MUSEUM"). This list is not exhaustive. </para> <programlisting> @@ -9027,20 +9055,22 @@ </entry> <entry colname="2"> <para> - This is used to enforce the delegation-only - status of infrastructure zones (e.g. COM, NET, ORG). - Any answer that - is received without an explicit or implicit delegation - in the authority - section will be treated as NXDOMAIN. This does not - apply to the zone - apex. This should not be applied to leaf zones. + This is used to enforce the delegation-only + status of infrastructure zones (e.g. COM, + NET, ORG). Any answer that is received + without an explicit or implicit delegation + in the authority section will be treated + as NXDOMAIN. This does not apply to the + zone apex. This should not be applied to + leaf zones. </para> <para> <varname>delegation-only</varname> has no - effect on answers received - from forwarders. + effect on answers received from forwarders. </para> + <para> + See caveats in <xref linkend="root_delegation_only"/>. + </para> </entry> </row> </tbody> @@ -9299,9 +9329,11 @@ <para> The flag only applies to hint and stub zones. If set to <userinput>yes</userinput>, then the zone will also be - treated as if it - is also a delegation-only type zone. + treated as if it is also a delegation-only type zone. </para> + <para> + See caveats in <xref linkend="root_delegation_only"/>. + </para> </listitem> </varlistentry> ==== //depot/projects/scottl-camlock/src/contrib/bind9/doc/arm/Bv9ARM.ch06.html#4 (text+ko) ==== @@ -14,7 +14,7 @@ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR >>> TRUNCATED FOR MAIL (1000 lines) <<<
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200906261625.n5QGPZwB034709>