Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Apr 2003 20:05:36 +0000
From:      Anthony Naggs <tony@ubik.demon.co.uk>
To:        freebsd-questions@freebsd.org
Subject:   Re: D-Link DGE-510T support
Message-ID:  <+ekuZbAQIvp+Iwnd@ubik.demon.co.uk>
In-Reply-To: <20030423155944.GB15916@eirikn.net>
References:  <20030423155944.GB15916@eirikn.net>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
In article <20030423155944.GB15916@eirikn.net>, Eirik Nygaard
<eirikn@bluezone.no> writes
>I just bought a D-Link DGE-510T NIC but FreeBSD will not detect it.
>Nothing on google about it either. So I hoped someone have a patch laying
>around.
>
>pciconf output:
>none1@pci0:12:0:        class=0x020000 card=0x40041186 chip=0x40001186 rev=0x0c 
>hdr=0x00
>    vendor   = 'D-Link System Inc'
>    device   = 'DL2000 Gigabit Ethernet Adapter'
>    class    = network
>    subclass = ethernet
>
>If you need some more information I will gladly send it.

The card only seems to be sold in Norway, so it probably isn't supported
yet.  (It is listed on www.dlink.no but not on their .com or .co.uk
sites.)  Though a similar card with the same parts maybe.

There are 3 big chips on the NIC in the PDF's picture.  One is under a
heat sink, but it would help if you could post the numbers from the
other two.  You could also ask try asking D-Link Norway for technical
info.


Tony



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?+ekuZbAQIvp+Iwnd>