Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 4 Aug 2001 18:56:59 -0700 (PDT)
From:      Matt Dillon <dillon@earth.backplane.com>
To:        "Justin T. Gibbs" <gibbs@scsiguy.com>
Cc:        Helge Oldach <helge.oldach@atosorigin.com>, freebsd-stable@FreeBSD.ORG
Subject:   Re: Dell Poweredge 2450 vs. recent sys/dev/aic7xxx MFCs 
Message-ID:  <200108050156.f751uxj77597@earth.backplane.com>
References:   <200108041524.f74FOpI05007@aslan.scsiguy.com>

next in thread | previous in thread | raw e-mail | index | archive | help
    I just built the world and a new kernel on one of my DELL2550's and
    the same problem happens.  This is a stock 2550, there's no chance 
    of the SCSI backplane being broken and it worked fine with an older
    kernel.

I've included two boot verbose dumps.  The first is with the latest kernel.
The second is with the previous (working) kernel.

						-Matt


------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
				LATEST KERNEL

SMAP type=01 base=00000000 00000000 len=00000000 000a0000
SMAP type=01 base=00000000 00100000 len=00000000 1fef0000
SMAP type=02 base=00000000 1fffec00 len=00000000 00000400
SMAP type=03 base=00000000 1fff0000 len=00000000 0000ec00
SMAP type=02 base=00000000 fec00000 len=00000000 00010000
SMAP type=02 base=00000000 fee00000 len=00000000 00010000
SMAP type=02 base=00000000 fff80000 len=00000000 00080000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.4-PRERELEASE #1: Sat Aug  4 18:30:26 PDT 2001
    dillon@apollo.backplane.com:/FreeBSD/FreeBSD-4.x/src/sys/compile/DELL2550
Calibrating clock(s) ... TSC clock: 1130458843 Hz, i8254 clock: 1193193 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (1130.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0035a000 - 0x1ffe7fff, 533258240 bytes (130190 pages)
avail memory = 519090176 (506924K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
SMP: CPU0 apic_initialize():
     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x000f0011, at 0xfec01000
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xc73e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdc80
Preloaded elf kernel "kernel" at 0xc0331000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
SMP: CPU0 bsp_apic_configure():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000270
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib1 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib0: <ServerWorks host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0008, revid=0x23
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0008, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0006, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0006, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1002, dev=0x4752, revid=0x27
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base fd000000, size 24
        map[14]: type 1, range 32, base 0000ec00, size  8
        map[18]: type 1, range 32, base fe101000, size 12
found-> vendor=0x1166, dev=0x0200, revid=0x50
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
        class=01-01-8a, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 000008b0, size  4
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> (vendor=0x1166, dev=0x0211) at 15.1
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib2: <ServerWorks host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x0962, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=3        secondarybus=3
IOAPIC #1 intpin 0 -> irq 2
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x08
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=2
        map[10]: type 1, range 32, base fe900000, size 12
        map[14]: type 1, range 32, base 0000bcc0, size  6
        map[18]: type 1, range 32, base fe500000, size 20
pci2: <PCI bus> on pcib2
pcib4: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci2
IOAPIC #1 intpin 15 -> irq 5
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
        class=01-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=a, irq=5
        map[10]: type 1, range 32, base 0000cc00, size  8
        map[14]: type 1, range 64, base fe7ff000, size 12
IOAPIC #1 intpin 14 -> irq 10
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
        class=01-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=b, irq=10
        map[10]: type 1, range 32, base 0000c800, size  8
        map[14]: type 1, range 64, base fe7fe000, size 12
pci3: <PCI bus> on pcib4
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem 0xfe7ff000-0xfe7fffff irq 5 at device 4.0 on pci3
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 10 at device 4.1 on pci3
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 2 at device 4.0 on pci2
fxp0: using memory space register mapping
fxp0: Ethernet address 00:06:5b:19:be:6f
fxp0: PCI IDs: 8086 1229 1028 009b 0008
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib1: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 1 -> irq 13
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x14e4, dev=0x1644, revid=0x10
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=13
        map[10]: type 1, range 64, base feb00000, size 16
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x14e4, dev=0x1644) at 8.0 irq 13
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pci-: pci3 exists, using next available unit number
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 5, 6, 10, apic_imen: 0x00fffb81
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
bpf: ppp0 attached
new masks: bio 68000040, tty 6300001a, net 6700001e
bpf: sl0 attached
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = disabled
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
     lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
Creating DISK da0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <FUJITSU MAJ3091MC 5509> Fixed Direct Access SCSI-3 device 
pass0: Serial Number     50076195
pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <DELL 1x4 U2W SCSI BP 1.27> Fixed Processor SCSI-2 device 
pass1: Serial Number 1
pass1: 3.300MB/s transfers
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <DELL 1x4 U2W SCSI BP 1.27> Fixed Processor SCSI-2 device 
pass1: Serial Number 1
pass1: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAJ3091MC 5509> Fixed Direct Access SCSI-3 device 
da0: Serial Number     50076195
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 17767889, size 17767827 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
swapon: adding /dev/da0s1b as swap device
Automatic boot in progress...
/dev/da0s1a: UNREF FILE I=23961  OWNER=root MODE=100500
/dev/da0s1a: SIZE=261008 MTIME=Apr 21 02:08 2001  (CLEARED)
/dev/da0s1a: SUMMARY INFORMATION BAD (SALVAGED)
/dev/da0s1a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/da0s1a: 1264 files, 37849 used, 89174 free (638 frags, 11067 blocks, 0.5% fragmentation)
(da0:ahc0:0:0:0): SCB 0x9 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
 DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x63, 0x160, 0x0, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Pending list: 9 
Kernel Free SCB list: 14 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10 
sg[0] - Addr 0x65aa000 : Length 4096
sg[1] - Addr 0x65eb000 : Length 2048
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0x9 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
 DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x63, 0x160, 0x0, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Pending list: 9 
Kernel Free SCB list: 14 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10 
sg[0] - Addr 0x65aa000 : Length 4096
sg[1] - Addr 0x65eb000 : Length 2048
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2
(da0:ahc0:0:0:0): SCB 0x9 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
 DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x63, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Pending list: 9 
Kernel Free SCB list: 14 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10 
sg[0] - Addr 0x65aa000 : Length 4096
sg[1] - Addr 0x65eb000 : Length 2048
(da0:ahc0:0:0:0): BDR message in message buffer
(da0:ahc0:0:0:0): SCB 0x9 - timed out
ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x168
SCSISEQ = 0x12, SBLKCTL = 0xa
 DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x88
SSTAT0 = 0x2, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x63, 0x160, 0x34, 0x34
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Pending list: 9 
Kernel Free SCB list: 14 15 16 17 18 19 0 1 2 4 5 6 7 8 13 12 11 10 
sg[0] - Addr 0x65aa000 : Length 4096
sg[1] - Addr 0x65eb000 : Length 2048
(da0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2



------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
				PREVIOUS KERNEL


SMAP type=01 base=00000000 00100000 len=00000000 1fef0000
SMAP type=02 base=00000000 1fffec00 len=00000000 00000400
SMAP type=03 base=00000000 1fff0000 len=00000000 0000ec00
SMAP type=02 base=00000000 fec00000 len=00000000 00010000
SMAP type=02 base=00000000 fee00000 len=00000000 00010000
SMAP type=02 base=00000000 fff80000 len=00000000 00080000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Mon Jul 23 21:14:02 PDT 2001
    dillon@apollo.backplane.com:/FreeBSD/FreeBSD-4.x/src/sys/compile/DELL2550
Calibrating clock(s) ... TSC clock: 1130473157 Hz, i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (1130.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00357000 - 0x1ffe7fff, 533270528 bytes (130193 pages)
avail memory = 519102464 (506936K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
SMP: CPU0 apic_initialize():
     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x000f0011, at 0xfec01000
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xc73e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdc80
Preloaded elf kernel "kernel.bak" at 0xc032e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
SMP: CPU0 bsp_apic_configure():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000270
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib1 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib0: <ServerWorks host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0008, revid=0x23
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0008, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0006, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0006, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1002, dev=0x4752, revid=0x27
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base fd000000, size 24
        map[14]: type 1, range 32, base 0000ec00, size  8
        map[18]: type 1, range 32, base fe101000, size 12
found-> vendor=0x1166, dev=0x0200, revid=0x50
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
        class=01-01-8a, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 000008b0, size  4
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> (vendor=0x1166, dev=0x0211) at 15.1
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib2: <ServerWorks host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x0962, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=3        secondarybus=3
IOAPIC #1 intpin 0 -> irq 2
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x08
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=2
        map[10]: type 1, range 32, base fe900000, size 12
        map[14]: type 1, range 32, base 0000bcc0, size  6
        map[18]: type 1, range 32, base fe500000, size 20
pci2: <PCI bus> on pcib2
pcib4: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci2
IOAPIC #1 intpin 15 -> irq 5
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
        class=01-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=a, irq=5
        map[10]: type 1, range 32, base 0000cc00, size  8
        map[14]: type 1, range 64, base fe7ff000, size 12
IOAPIC #1 intpin 14 -> irq 10
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
        class=01-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=b, irq=10
        map[10]: type 1, range 32, base 0000c800, size  8
        map[14]: type 1, range 64, base fe7fe000, size 12
pci3: <PCI bus> on pcib4
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem 0xfe7ff000-0xfe7fffff irq 5 at device 4.0 on pci3
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 424 instructions downloaded
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 10 at device 4.1 on pci3
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 424 instructions downloaded
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 2 at device 4.0 on pci2
fxp0: using memory space register mapping
fxp0: Ethernet address 00:06:5b:19:be:6f
fxp0: PCI IDs: 8086 1229 1028 009b 0008
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcib1: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 1 -> irq 13
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x14e4, dev=0x1644, revid=0x10
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=13
        map[10]: type 1, range 64, base feb00000, size 16
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x14e4, dev=0x1644) at 8.0 irq 13
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pci-: pci3 exists, using next available unit number
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 5, 6, 10, apic_imen: 0x00fffb81
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
bpf: ppp0 attached
new masks: bio 68000040, tty 6300001a, net 6700001e
bpf: sl0 attached
IP Filter: v3.4.16 initialized.  Default = pass all, Logging = disabled
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
     lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
Creating DISK da0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <FUJITSU MAJ3091MC 5509> Fixed Direct Access SCSI-3 device 
pass0: Serial Number     50076195
pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <DELL 1x4 U2W SCSI BP 1.27> Fixed Processor SCSI-2 device 
pass1: Serial Number 1
pass1: 3.300MB/s transfers
pass1 at ahc0 bus 0 target 6 lun 0
pass1: <DELL 1x4 U2W SCSI BP 1.27> Fixed Processor SCSI-2 device 
pass1: Serial Number 1
pass1: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAJ3091MC 5509> Fixed Direct Access SCSI-3 device 
da0: Serial Number     50076195
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 17767889, size 17767827 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
swapon: adding /dev/da0s1b as swap device
Automatic boot in progress...
/dev/da0s1a: UNREF FILE I=23961  OWNER=root MODE=100500
/dev/da0s1a: SIZE=261008 MTIME=Apr 21 02:08 2001  (CLEARED)
/dev/da0s1a: 1264 files, 37849 used, 89174 free (638 frags, 11067 blocks, 0.5% fragmentation)
/dev/da0s1h: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1h: clean, 4163300 free (60 frags, 520405 blocks, 0.0% fragmentation)
/dev/da0s1g: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1g: clean, 2840012 free (10668 frags, 353668 blocks, 0.3% fragmentation)
/dev/da0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1e: clean, 126816 free (48 frags, 15846 blocks, 0.0% fragmentation)
/dev/da0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 127021 free (21 frags, 15875 blocks, 0.0% fragmentation)
Doing initial network setup: hostname.
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 216.240.41.13 netmask 0xffffff00 broadcast 216.240.41.255
        ether 00:06:5b:19:be:6f 
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
Flushed all rules.
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
01000 allow ip from any to any
Firewall rules loaded, starting divert daemons:.
add net default: gateway 216.240.41.15
Additional routing options: tcp extensions=NO TCP keepalive=YES.
Routing daemons:.
Mounting NFS file systems:.
Additional daemons: syslogd.
Doing additional network setup: portmap.
Starting final network daemons:.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons: cron sshd.
Initial rc.i386 initialization:.
Configuring syscons: blank_time.
Additional ABI support:.
Local package initialization:.
Additional TCP options:.

Sat Aug  4 18:54:02 PDT 2001



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200108050156.f751uxj77597>