Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Jun 2003 08:18:54 +0100
From:      "Carl Morley" <bsdmn@webize.com.au>
To:        "'Scott Mitchell'" <scott+freebsd@fishballoon.org>, <freebsd-stable@freebsd.org>
Subject:   RE: Via EPIA Mini-ITX motherboard
Message-ID:  <003001c32f20$8f4616a0$cf64a8c0@cmlaptop>
In-Reply-To: <20030608152726.GA26871@tuatara.fishballoon.org>

next in thread | previous in thread | raw e-mail | index | archive | help


> -----Original Message-----
> From: owner-freebsd-stable@freebsd.org [mailto:owner-freebsd-
> stable@freebsd.org] On Behalf Of Scott Mitchell
> Sent: Sunday, 8 June 2003 16:27
> To: freebsd-stable@freebsd.org
> Subject: Re: Via EPIA Mini-ITX motherboard
> 
> On Thu, Dec 05, 2002 at 10:16:13PM -0000, George Barnett wrote:
> > Hi,
> >
> > Has anybody got experience running a recent snapshot on one of
these?
> >
> > I'm looking to get the C3 800 model and make a small fileserver for
home
> use
> > and am looking for feedback on hardware compatibility / problems /
etc.
> 
> An old thread, but one that was worth keeping.  I'm about to put
together
> an EPIA-M based system to be my new
router/firewall/mail-web-mp3-server so
> I've been going through the archives to see if I can distill exactly
which
> hardware on these boards is and isn't supported.  I think I have a
pretty
> good idea now, but I wonder if anyone out there is running 4.8R or a
> recent
> -STABLE on one of these and can confirm for sure that:
> 
> 	- The onboard vr(4) Ethernet is now working reliably at 100Mbps?
> 
> 	- The USB ports work, but only in USB 1.1 compatibility mode?
> 
> 	- The Firewire ports are recognised, and can successfully drive
a
> 	  FireWire disk?
> 
> Note that I'm most interested in the EPIA *M* boards, the newer ones
with
> USB 2.0, Firewire and hardware MPEG decoding (not that I'll be using
> that...), rather than the original EPIA.
> 
> Many thanks in advance,
> 
> 	Scott


Hi Scott,
I still get; "vr0: rx packet lost" errors off the vr0 card.  Mostly when
people connect over the vpn and use MS terminal services.
Cheers,
Carl.


> 
> --
>
========================================================================
==
> =
> Scott Mitchell           | PGP Key ID | "Eagles may soar, but weasels
> Cambridge, England       | 0x54B171B9 |  don't get sucked into jet
> engines"
> scott at fishballoon.org | 0xAA775B8B |      -- Anon
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003001c32f20$8f4616a0$cf64a8c0>