Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Jan 1999 22:41:07 +0100 (CET)
From:      Dominik Brettnacher <domi@saargate.de>
To:        freebsd-isdn@FreeBSD.ORG
Subject:   =?ISO-8859-1?Q?FritzCard_and_PPP_doesn=B4t_work=2E=2E=2E=2E?=
Message-ID:  <Pine.BSF.3.96.990121223515.623C-100000@dominik.saargate.de>

next in thread | raw e-mail | index | archive | help
I have a FritzCard, FreeBSD 2.2.8 and i4b-00.70.00-beta. FreeBSD
recognizes the following:

isic0 at 0x300 irq 15 flags 0x4 on isa
isic0: AVM A1 or AVM Fritz!Card
isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x16e0)
isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x6e0, AddrB=0xee0)
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4btrc: 4 ISDN trace device(s) attached


This is my isdnd.rc:

---cut---
system

# accounting
# ----------

acctall		= on			# generate info for everything
acctfile	= /var/log/isdnd.acct	# name & location of accounting file
useacctfile	= yes			# generate accouting info to file

# monitor
# -------

monitor-allowed	= yes			# global switch: monitor on/off
monitor-port	= 451			# default monitor TCP port

# Monitor rights are granted due to the most specific host/net spec, i.e. in 
# the example below host 192.168.1.2 will have the rights specified on that
# line, even so it belongs to net 192.168.1.0/24 as well.
#
# A monitor specification may either be:
#
#  - the name of a local (UNIX-domain) socket; this MUST start with a "/"
monitor		= "/var/run/isdn-monitor" 
monitor-access	= fullcmd
monitor-access	= channelstate, logevents
monitor-access	= callin, callout

# ratesfile
# ---------

ratesfile       = /etc/isdn/isdnd.rates # name & location of rates file

# regular expression pattern matching
# -----------------------------------

#regexpr        = "connected.*KTS"      # look for matches in log messages
#regprog        = connectKTS            # execute program when match is
found


# realtime priority section
# -------------------------

rtprio		= 25			# modify isdnd's process priority

###############################################################################
entry
name                    = lf
usrdevicename           = isp
usrdeviceunit           = 0
isdncontroller          = 0
isdnchannel             = -1
local-phone-incoming    = 06868180051
remote-phone-incoming   = 0686193630
local-phone-dialout     = 06868180051
remote-phone-dialout    = 0686193630
remdial-handling        = first
dialin-reaction         = accept
dialout-type            = normal
b1protocol              = hdlc
idletime-incoming       = 240
idletime-outgoing       = 30
ratetype                = 0
unitlength              = 90
unitlengthsrc           = rate
dialretries             = 3
dialrandincr            = on
recoverytime            = 25
---cut---

I try to get a connection with these commands:

ifconfig isp0 link1 0.0.0.0 193.158.76.64 netmask 0xffffff00 debug
ifconfig isp0 down
spppcontrol isp0 myauthproto=pap myauthname=xxxxx myauthsecret="xxxxx"
ifconfig isp0 up
route add default -interface isp0


But the only thing I get is this:

---cut---
isp0: lcp close(starting)
isp0: phase dead
isp0: lcp close(initial)
isp0: lcp open(initial)
isp0: phase establish
isp0: lcp close(starting)
isp0: phase dead
isp0: lcp close(initial)
isp0: lcp open(initial)
isp0: phase establish
isp0: lcp close(starting)
isp0: phase dead
isp0: lcp close(initial)
isp0: lcp open(initial)
isp0: phase establish
isp0: lcp close(starting)
isp0: phase dead
isp0: lcp close(initial)
isp0: lcp open(initial)
isp0: phase establish
isp0: lcp close(starting)
isp0: phase dead
---cut---


What am I doing wrong?


-- 

Dominik


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.990121223515.623C-100000>