Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 9 Jan 2009 14:54:55 +0000
From:      Frank Shute <frank@shute.org.uk>
To:        Polytropon <freebsd@edvax.de>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Can't boot machine after upgrade
Message-ID:  <20090109145455.GA50881@orange.esperance-linux.co.uk>
In-Reply-To: <20090109134342.5fb692f7.freebsd@edvax.de>
References:  <20090109122720.GA38699@orange.esperance-linux.co.uk> <20090109134342.5fb692f7.freebsd@edvax.de>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Fri, Jan 09, 2009 at 01:43:42PM +0100, Polytropon wrote:
>
> On Fri, 9 Jan 2009 12:27:20 +0000, Frank Shute <frank@shute.org.uk> wrote:
> > Anybody got any idea on what's going on & how to fix it?
> 
> The messages you presented seem to indicate that ad0 is not found.
> It's not listed in the available devices, and boot fails.
> 
> Could you check its presence using a FreeBSD / FreeSBIE boot CD?

I tried booting a FreeBSD CD & going into sysinstall & then fdisk but
it said it couldn't find any disks.

freesbie.org is unfortunately down :(

> 
> I'm surprised the hard disk isn't detected at all... are you using
> the GENERIC kernel?

I'm not using GENERIC but IIRC I've only stripped out NIC's etc.

I booted with booting verbose and it's showing this before it jumps to
the mountroot> prompt:

ata1: SATA connect time=0ms
ata1: SIGNATURE: eb140101
ata1: ahci_reset devices=0x4<ATAPI_MASTER>
ata1: reinit done ..
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata1: ahci_reset devices=0x1<ATA_MASTER>
ata2: reinit done ..
ata2: reiniting channel ..

*repeats*

ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s2

mountroot>

> 
> -- 
> Polytropon

Hope that helps some more.


Regards,

-- 

 Frank


 Contact info: http://www.shute.org.uk/misc/contact.html




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20090109145455.GA50881>