Date: Mon, 13 Oct 2008 14:10:34 +0100 From: Gianni Tedesco <gxt@cs.nott.ac.uk> To: freebsd-stable@freebsd.org Subject: Re: very early kernel panic on system with 4GB mem Message-ID: <1223903434.12630.16.camel@dao.KWGR614> In-Reply-To: <1223900423.12630.12.camel@dao.KWGR614> References: <1223900423.12630.12.camel@dao.KWGR614>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 2008-10-13 at 13:20 +0100, Gianni Tedesco wrote: > Hi, > > Tried booting FREEBSD7.0 Release #1 on a a dell poweredge SC1425. I get > an error 12: page fault in kernel mode (on write). Backtrace shows > garbage, a few calls in section _end... The fault is very early on, > literally copyright message, a message about memory above 4GB ignored > then crash. Incidentally this is a non-PAE build. Config attached below. > > Couldn't find any other similar reports. I have remote gdb access to > machine so if you need further information let me know. > > Thanks! > > # # > # Kernel Configuration Files: > # > # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ../../conf/NOTES and NOTES files. > # If you are in doubt as to the purpose or necessity of a line, check first > # in NOTES. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.410 2004/08/01 19:37:34 markm Exp $ > > > machine i386 > #cpu I486_CPU > #cpu I586_CPU > cpu I686_CPU > ident MANAGER > > makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols > options KDB > options DDB > #makeoptions COPTFLAGS=-O0 > makeoptions COPTFLAGS="-pipe" > #makeoptions COPTFLAGS="-pipe" > > options MD_ROOT_SIZE=32000 > > hints "GENERIC.hints" > > options PREEMPTION # Enable kernel thread preemption > options UNIONFS > > options SCHED_4BSD # BSD scheduler > options INET # InterNETworking > #options INET6 # IPv6 communications protocols > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > #options UFS_ACL # Support for access control lists > #options UFS_DIRHASH # Improve performance on big directories > options MD_ROOT # MD is a potential root device > #options NFSCLIENT # Network Filesystem Client > #options NFSSERVER # Network Filesystem Server > #options NFS_ROOT # NFS usable as /, requires NFSCLIENT > #options MSDOSFS # MSDOS Filesystem > options CD9660 # ISO 9660 Filesystem > options PROCFS # Process filesystem (requires PSEUDOFS) > options PSEUDOFS # Pseudo-filesystem framework > #options GEOM_GPT # GUID Partition Tables. > #options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] > #options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI > options KTRACE # ktrace(1) support > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options ADAPTIVE_GIANT # Giant mutex is adaptive. > #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > #options PREEMPTION > #options TCP_DROP_SYNFIN > #options PAE # Big RAM (>4Gb) extention > > # To make an SMP kernel, the next two are needed > options SMP # Symmetric MultiProcessor Kernel > #options NETGRAPH > device apic # I/O APIC > > #options DEVICE_POLLING > #options HZ=2000 > > # > # Certain applications can grow to be larger than the 512M limit that > # FreeBSD initially imposes. Below are some options to allow that > # limit to grow. MAXDSIZ is the maximum that the limit can be set to, > # and the DFLDSIZ is the default value for the limit. MAXSSIZ is the > # maximum that the stack limit can be set to. You might want to set > # the default lower than the max, and explicitly set the maximum with > # a shell command for processes that regularly exceed the limit like > # INND. > # > options MAXSSIZ=(128UL*1024*1024) > options MAXDSIZ=(2048UL*1024*1024) > options DFLDSIZ=(1024UL*1024*1024) > > > device acpi > > # Bus support. Do not remove isa, even if you have no isa slots > device eisa > device pci > > # Floppy drives > #device fdc > > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device ataraid # ATA RAID drives > device atapicd # ATAPI CDROM drives > #device atapifd # ATAPI floppy drives > #device atapist # ATAPI tape drives > options ATA_STATIC_ID # Static device numbering > > # SCSI Controllers > device ahb # EISA AHA1742 family > device ahc # AHA2940 and onboard AIC7xxx devices > #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > device ahd # AHA39320/29320 and onboard AIC79xx devices > #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > device amd # AMD 53C974 (Tekram DC-390(T)) > device hptiop # Highpoint RocketRaid 3xxx series > device isp # Qlogic family > #device* ispfw # Firmware for QLogic HBAs- normally a module > device mpt # LSI-Logic MPT-Fusion > #device * ncr # NCR/Symbios Logic > device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') > device trm # Tekram DC395U/UW/F DC315U adapters > > device adv # Advansys SCSI adapters > device adw # Advansys wide SCSI adapters > device aha # Adaptec 154x SCSI adapters > device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. > device bt # Buslogic/Mylex MultiMaster SCSI adapters > > device ncv # NCR 53C500 > device nsp # Workbit Ninja SCSI-3 > device stg # TMC 18C30/18C50 > > # SCSI peripherals > device scbus # SCSI bus (required for SCSI) > #device ch # SCSI media changers > device da # Direct Access (disks) > #device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > device ses # SCSI Environmental Services (and SAF-TE) > > # RAID controllers interfaced to the SCSI subsystem > device amr # AMI MegaRAID > device arcmsr # Areca SATA II RAID > device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > device ciss # Compaq Smart RAID 5* > device dpt # DPT Smartcache III, IV - See NOTES for options > device hptmv # Highpoint RocketRAID 182x > device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx > device iir # Intel Integrated RAID > device ips # IBM (Adaptec) ServeRAID > device mly # Mylex AcceleRAID/eXtremeRAID > device twa # 3ware 9000 series PATA/SATA RAID > > # RAID controllers > device aac # Adaptec FSA RAID > device aacp # SCSI passthrough for aac (requires CAM) > device ida # Compaq Smart RAID > device mfi # LSI MegaRAID SAS > device mlx # Mylex DAC960 family > device pst # Promise Supertrak SX6000 > device twe # 3ware ATA RAID > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > #device psm # PS/2 mouse > > device vga # VGA video card driver > > #device splash # Splash screen and screen saver support > > # syscons is the default console driver, resembling an SCO console > device sc > > # Enable this for the pcvt (VT220 compatible) console driver > #device vt > #options XSERVER # support for X server on a vt console > #options FAT_CURSOR # start with block cursor > > #device agp # support several AGP chipsets > > # Floating point support - do not disable. > #device npx > > # Power management support (see NOTES for more options) > #device apm > # Add suspend/resume support for the i8254. > #device pmtimer > > # PCCARD (PCMCIA) support > # PCMCIA and cardbus bridge support > #device cbb # cardbus (yenta) bridge > #device pccard # PC Card (16-bit) bus > #device cardbus # CardBus (32-bit) bus > > # Serial (COM) ports > #device sio # 8250, 16[45]50 based serial ports > > # Parallel port > #device ppc > #device ppbus # Parallel port bus (required) > #device lpt # Printer > #device plip # TCP/IP over parallel > #device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > # If you've got a "dumb" serial or parallel PCI card that is > # supported by the puc(4) glue driver, uncomment the following > # line to enable it (connects to the sio and/or ppc drivers): > #device puc > > # PCI Ethernet NICs. > device de # DEC/Intel DC21x4x (``Tulip'') > device em # Intel PRO/1000 adapter Gigabit Ethernet Card > device ixgb # Intel PRO/10GbE Ethernet Card > device txp # 3Com 3cR990 (``Typhoon'') > device vx # 3Com 3c590, 3c595 (``Vortex'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! > device miibus # MII bus support > device bfe # Broadcom BCM440x 10/100 Ethernet > device bge # Broadcom BCM570xx Gigabit Ethernet > device bce > device dc # DEC/Intel 21143 and various workalikes > device fxp # Intel EtherExpress PRO/100B (82557, 82558) > device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') > device re # RealTek 8139C+/8169/8169S/8110S > device rl # RealTek 8129/8139 > device sf # Adaptec AIC-6915 (``Starfire'') > device sis # Silicon Integrated Systems SiS 900/SiS 7016 > device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet > device ste # Sundance ST201 (D-Link DFE-550TX) > device ti # Alteon Networks Tigon I/II gigabit Ethernet > device tl # Texas Instruments ThunderLAN > device tx # SMC EtherPower II (83c170 ``EPIC'') > device vr # VIA Rhine, Rhine II > device wb # Winbond W89C840F > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > device loop # Network loopback > device random # Entropy device > device ether # Ethernet support > #device sl # Kernel SLIP > #device ppp # Kernel PPP > #device tun # Packet tunnel. > device pty # Pseudo-ttys (telnet etc) > device md # Memory "disks" > #device gif # IPv6 and IPv4 tunneling > #device faith # IPv6-to-IPv4 relaying (translation) > > #device pf #PF OpenBSD packet-filter firewall > #device pflog #logging support interface for PF > #device pfsync #synchronization interface for PF > > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > device bpf # Berkeley packet filter > > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device ehci # EHCI PCI->USB interface (USB 2.0) > device usb # USB Bus (required) > #device udbp # USB Double Bulk Pipe devices > device ugen # Generic > #device uhid # "Human Interface Devices" > device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus and da > #device ums # Mouse > #device urio # Diamond Rio 500 MP3 player > #device uscanner # Scanners > # USB Ethernet, requires mii > #device aue # ADMtek USB Ethernet > #device axe # ASIX Electronics USB Ethernet > #device cue # CATC USB Ethernet > #device kue # Kawasaki LSI USB Ethernet > #device rue # RealTek RTL8150 USB Ethernet > device firmware > > # FireWire support > #device firewire # FireWire bus code > #device sbp # SCSI over FireWire (Requires scbus and da) > #device fwe # Ethernet over FireWire (non-standard!) >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1223903434.12630.16.camel>