Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 19 Dec 2003 10:29:51 -0000
From:      "Admin" <admin@sycos.co.uk>
To:        "Dorin H" <bj93542@yahoo.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 5.1 PowerPak Installation problem
Message-ID:  <000d01c3c61b$0a698510$1c77fea9@dpc27>
References:  <20031219000023.25533.qmail@web12606.mail.yahoo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.

------=_NextPart_000_000A_01C3C61B.0968DDF0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hi Dorin,

Many thanks for the help. I have attached a copy of the messages and
hwlog1.txt files.

I look forward to your advise to resolve the h/w problem.

Best Regards

Gurdial Chandra
Sycos AES


----- Original Message -----
From: "Dorin H" <bj93542@yahoo.com>
To: "Admin" <admin@sycos.co.uk>
Cc: <freebsd-questions@freebsd.org>
Sent: Friday, December 19, 2003 12:00 AM
Subject: Re: FreeBSD 5.1 PowerPak Installation problem


> >
> > I have created a log file using dmesg, but, I am
> > unable to copy on to the
> > floppy disc. When I try to mount the floppy with
> > mount /dev/fd0 /mnt, it
> > gives me error message: Device is not configured.
> >
>
> Try:
>
> mount -t msdos /dev/fd0 /mnt
>
> with any DOS formated disc.
> If you want to mount a UFS partition/floppy, you have
> to create actually the FS structure first using newfs
> (but you will not be able to easily read it from Win
> :) ).
>
> % man 1 fdformat
>
> <quote>
> Note that fdformat does only perform low-level
> formatting.  In order to create a file system on the
> medium, see the commands newfs(8) for a UFS file
> system, or newfs_msdos(8) for an MS-DOS (FAT) file
> system.
> </quote>
>
> Mount expects a file system structure on that disc
> (either UFS or DOS).
>
> >
> > I formatted the floppy using fdformat command, and
> > when tried to mount, it
> > gives me error message "incorrect super block". Now
> > this format is not
> > copatible with windows system.
>
> No file system present (in this case, mount tried to
> mount the default ufs FS, which expect to start with a
> superblock, which is not there, as you haven't
> newfs-ed the disc).
> >
> > I also created another dos fat partition and tried
> > to mount so that I could
> > copy the log file to dos partition, it won't work. I
> > have used this method
> > to transfer the files on a Linux system.
> >
>
> Again, see above (newfs(8)). If you formated as type,
> again, use -t msdos to specify the type (default is
> ufs).
>
> > Is there a way to transfer files from FreeBSD to
> > Windows?
>
> Simple way:) : new floppy (preformated in old DOS/IBM
> format), insert, "mount -t msdos /dev/fd0 /mnt"
> , copy the stuff, "umount /dev/fd0", extract, go to
> windoze....
>
> /Dorin.
>
> PS. In case of errors, check if you have the /dev/fd0
> device actually. You should, if your drive is
> recognized during boot.
> PS2. Maybe you want to take a look at www.onlamp.com,
> they have many nice written tutorials about FreeBSD to
> put you on track.
>
>
>
> __________________________________
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing.
> http://photos.yahoo.com/

------=_NextPart_000_000A_01C3C61B.0968DDF0
Content-Type: application/octet-stream;
	name="MESSAGES"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="MESSAGES"

Dec 18 12:04:00  syslogd: kernel boot file is /boot/kernel/kernel=0A=
Dec 18 12:04:00  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 18 12:04:00  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 18 12:04:00  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 18 12:04:00  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 18 12:04:00  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 18 12:04:00  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc0b0c000.=0A=
Dec 18 12:04:00  kernel: Preloaded mfs_root "/boot/mfsroot" at =
0xc0b0c244.=0A=
Dec 18 12:04:00  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc0b0c288.=0A=
Dec 18 12:04:00  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 18 12:04:00  kernel: Timecounter "TSC"  frequency 2527014564 Hz=0A=
Dec 18 12:04:00  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.01-MHz 686-class CPU)=0A=
Dec 18 12:04:00  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 18 12:04:00  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 18 12:04:00  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 18 12:04:00  kernel: avail memory =3D 509652992 (486 MB)=0A=
Dec 18 12:04:00  kernel: Pentium Pro MTRR support enabled=0A=
Dec 18 12:04:00  kernel: md0: Preloaded image </boot/mfsroot> 4423680 =
bytes at 0xc06877a4=0A=
Dec 18 12:04:00  kernel: npx0: <math processor> on motherboard=0A=
Dec 18 12:04:00  kernel: npx0: INT 16 interface=0A=
Dec 18 12:04:00  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 18 12:04:00  kernel: pcibios: BIOS version 2.10=0A=
Dec 18 12:04:00  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 18 12:04:00  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 18 12:04:00  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 18 12:04:00  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 18 12:04:00  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 18 12:04:00  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 18 12:04:00  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 18 12:04:00  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 18 12:04:00  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 18 12:04:00  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 18 12:04:00  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 18 12:04:00  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 18 12:04:00  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 18 12:04:00  kernel: isa0: <ISA bus> on isab0=0A=
Dec 18 12:04:00  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 18 12:04:00  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 18 12:04:00  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 18 12:04:00  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 18 12:04:00  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 18 12:04:00  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 18 12:04:00  kernel: usb0: USB revision 1.0=0A=
Dec 18 12:04:00  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:04:00  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 18 12:04:00  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 18 12:04:00  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 18 12:04:00  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 18 12:04:00  kernel: usb1: USB revision 1.0=0A=
Dec 18 12:04:00  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:04:00  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 18 12:04:00  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 18 12:04:00  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 18 12:04:00  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 18 12:04:00  kernel: usb2: USB revision 1.0=0A=
Dec 18 12:04:00  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:04:00  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 18 12:04:00  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 18 12:04:00  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 18 12:04:00  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 18 12:04:00  kernel: miibus0: <MII bus> on sis0=0A=
Dec 18 12:04:00  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 18 12:04:00  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 18 12:04:00  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 18 12:04:00  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 18 12:04:00  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 18 12:04:00  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 18 12:04:00  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 18 12:04:00  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 18 12:04:00  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 18 12:04:00  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 18 12:04:00  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 18 12:04:00  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 18 12:04:00  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 18 12:04:00  kernel: lpt0: Interrupt-driven port=0A=
Dec 18 12:04:00  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 18 12:04:00  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 18 12:04:00  kernel: sio0: type 16550A=0A=
Dec 18 12:04:00  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 18 12:04:00  kernel: sio1: type 16550A=0A=
Dec 18 12:04:00  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 18 12:04:00  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 18 12:04:00  kernel: kbd0 at atkbd0=0A=
Dec 18 12:04:00  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 18 12:04:00  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 18 12:04:00  kernel: pmtimer0 on isa0=0A=
Dec 18 12:04:00  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 18 12:04:00  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 18 12:04:00  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 18 12:04:00  kernel: Timecounters tick every 10.000 msec=0A=
Dec 18 12:04:00  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 18 12:04:00  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 18 12:04:00  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 18 12:04:00  kernel: Mounting root from ufs:/dev/md0=0A=
Dec 18 12:04:00  kernel: module_register: module pci/txp already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/txp failed to register: 17=0A=
Dec 18 12:04:00  kernel: interface sysvmsg.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:04:00  kernel: module_register: module pccard/xe already =
exists!=0A=
Dec 18 12:04:00  kernel: Module pccard/xe failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/pcn already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/pcn failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pcn/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module pcn/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/vr already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/vr failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module vr/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module vr/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/ste already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/ste failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module ste/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module ste/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module if_tun already exists!=0A=
Dec 18 12:04:00  kernel: Module if_tun failed to register: 17=0A=
Dec 18 12:04:00  kernel: can't re-use a leaf (if_tun_debug)!=0A=
Dec 18 12:04:00  kernel: module_register: module uhub/cue already exists!=0A=
Dec 18 12:04:00  kernel: Module uhub/cue failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module cardbus/xl already =
exists!=0A=
Dec 18 12:04:00  kernel: Module cardbus/xl failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/xl already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/xl failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module xl/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module xl/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/vx already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/vx failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module eisa/vx already exists!=0A=
Dec 18 12:04:00  kernel: Module eisa/vx failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pccard/ed already =
exists!=0A=
Dec 18 12:04:00  kernel: Module pccard/ed failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module ed/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module ed/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/ed already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/ed failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module isa/ed already exists!=0A=
Dec 18 12:04:00  kernel: Module isa/ed failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/bge already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/bge failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module bge/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module bge/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/wb already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/wb failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module wb/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module wb/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/em already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/em failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/rl already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/rl failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module cardbus/rl already =
exists!=0A=
Dec 18 12:04:00  kernel: Module cardbus/rl failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module rl/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module rl/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/sis already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/sis failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module sis/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module sis/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module cardbus/dc already =
exists!=0A=
Dec 18 12:04:00  kernel: Module cardbus/dc failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/dc already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/dc failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module dc/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module dc/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: can't re-use a leaf (dc_quick)!=0A=
Dec 18 12:04:00  kernel: interface sysvshm.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:04:00  kernel: module_register: module uhub/aue already exists!=0A=
Dec 18 12:04:00  kernel: Module uhub/aue failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module aue/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module aue/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: interface miibus.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:04:00  kernel: module_register: module pci/lnc already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/lnc failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module isa/lnc already exists!=0A=
Dec 18 12:04:00  kernel: Module isa/lnc failed to register: 17=0A=
Dec 18 12:04:00  kernel: interface sysvsem.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:04:00  kernel: module_register: module pccard/fe already =
exists!=0A=
Dec 18 12:04:00  kernel: Module pccard/fe failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module isa/fe already exists!=0A=
Dec 18 12:04:00  kernel: Module isa/fe failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/fxp already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/fxp failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module cardbus/fxp already =
exists!=0A=
Dec 18 12:04:00  kernel: Module cardbus/fxp failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module fxp/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module fxp/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: can't re-use a leaf (fxp_rnr)!=0A=
Dec 18 12:04:00  kernel: can't re-use a leaf (fxp_noflow)!=0A=
Dec 18 12:04:00  kernel: module_register: module uhub/kue already exists!=0A=
Dec 18 12:04:00  kernel: Module uhub/kue failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module pci/sf already exists!=0A=
Dec 18 12:04:00  kernel: Module pci/sf failed to register: 17=0A=
Dec 18 12:04:00  kernel: module_register: module sf/miibus already =
exists!=0A=
Dec 18 12:04:00  kernel: Module sf/miibus failed to register: 17=0A=
Dec 18 12:04:00  kernel: Waiting (max 60 seconds) for system process =
`vnlru' to stop...stopped=0A=
Dec 18 12:04:00  kernel: Waiting (max 60 seconds) for system process =
`bufdaemon' to stop...stopped=0A=
Dec 18 12:04:00  kernel: Waiting (max 60 seconds) for system process =
`syncer' to stop...stopped=0A=
Dec 18 12:04:00  kernel: =0A=
Dec 18 12:04:00  kernel: syncing disks, buffers remaining... 19 19 4 4 =0A=
Dec 18 12:04:00  kernel: done=0A=
Dec 18 12:04:00  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 18 12:04:00  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 18 12:04:00  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 18 12:04:00  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 18 12:04:00  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 18 12:04:00  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc06d4000.=0A=
Dec 18 12:04:00  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc06d4244.=0A=
Dec 18 12:04:00  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 18 12:04:00  kernel: Timecounter "TSC"  frequency 2527015308 Hz=0A=
Dec 18 12:04:00  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.02-MHz 686-class CPU)=0A=
Dec 18 12:04:00  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 18 12:04:00  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 18 12:04:00  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 18 12:04:00  kernel: avail memory =3D 514064384 (490 MB)=0A=
Dec 18 12:04:00  kernel: Pentium Pro MTRR support enabled=0A=
Dec 18 12:04:00  kernel: npx0: <math processor> on motherboard=0A=
Dec 18 12:04:00  kernel: npx0: INT 16 interface=0A=
Dec 18 12:04:00  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 18 12:04:00  kernel: pcibios: BIOS version 2.10=0A=
Dec 18 12:04:00  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 18 12:04:00  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 18 12:04:00  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 18 12:04:00  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 18 12:04:00  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 18 12:04:00  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 18 12:04:00  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 18 12:04:00  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 18 12:04:00  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 18 12:04:00  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 18 12:04:00  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 18 12:04:00  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 18 12:04:00  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 18 12:04:00  kernel: isa0: <ISA bus> on isab0=0A=
Dec 18 12:04:00  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 18 12:04:00  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 18 12:04:00  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 18 12:04:00  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 18 12:04:00  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 18 12:04:00  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 18 12:04:00  kernel: usb0: USB revision 1.0=0A=
Dec 18 12:04:00  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:04:00  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 18 12:04:00  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 18 12:04:00  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 18 12:04:00  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 18 12:04:00  kernel: usb1: USB revision 1.0=0A=
Dec 18 12:04:00  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:04:00  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 18 12:04:00  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 18 12:04:00  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 18 12:04:00  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 18 12:04:00  kernel: usb2: USB revision 1.0=0A=
Dec 18 12:04:00  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:04:00  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 18 12:04:00  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 18 12:04:00  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 18 12:04:00  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 18 12:04:00  kernel: miibus0: <MII bus> on sis0=0A=
Dec 18 12:04:00  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 18 12:04:00  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 18 12:04:00  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 18 12:04:00  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 18 12:04:00  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 18 12:04:00  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 18 12:04:00  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 18 12:04:00  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 18 12:04:00  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 18 12:04:00  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 18 12:04:00  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 18 12:04:00  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 18 12:04:00  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 18 12:04:00  kernel: lpt0: Interrupt-driven port=0A=
Dec 18 12:04:00  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 18 12:04:00  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 18 12:04:00  kernel: sio0: type 16550A=0A=
Dec 18 12:04:00  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 18 12:04:00  kernel: sio1: type 16550A=0A=
Dec 18 12:04:00  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 18 12:04:00  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 18 12:04:00  kernel: kbd0 at atkbd0=0A=
Dec 18 12:04:00  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 18 12:04:00  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 18 12:04:00  kernel: pmtimer0 on isa0=0A=
Dec 18 12:04:00  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 18 12:04:00  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 18 12:04:00  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 18 12:04:00  kernel: Timecounters tick every 10.000 msec=0A=
Dec 18 12:04:00  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 18 12:04:00  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 18 12:04:00  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 18 12:04:00  kernel: Mounting root from ufs:/dev/ad0s1a=0A=
Dec 18 12:04:30  login: 1 LOGIN FAILURE ON ttyv0=0A=
Dec 18 12:05:22  login: 4 LOGIN FAILURES ON ttyv0=0A=
Dec 18 12:05:25  login: ROOT LOGIN (root) ON ttyv0=0A=
Dec 18 12:48:04  shutdown: reboot by root: =0A=
Dec 18 12:48:06  syslogd: exiting on signal 15=0A=
Dec 18 12:53:23  syslogd: kernel boot file is /boot/kernel/kernel=0A=
Dec 18 12:53:23  kernel: Waiting (max 60 seconds) for system process =
`vnlru' to stop...stopped=0A=
Dec 18 12:53:23  kernel: Waiting (max 60 seconds) for system process =
`bufdaemon' to stop...stopped=0A=
Dec 18 12:53:23  kernel: Waiting (max 60 seconds) for system process =
`syncer' to stop...stopped=0A=
Dec 18 12:53:23  kernel: =0A=
Dec 18 12:53:23  kernel: syncing disks, buffers remaining... 1 1 =0A=
Dec 18 12:53:23  kernel: done=0A=
Dec 18 12:53:23  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 18 12:53:23  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 18 12:53:23  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 18 12:53:23  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 18 12:53:23  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 18 12:53:23  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc0b0c000.=0A=
Dec 18 12:53:23  kernel: Preloaded mfs_root "/boot/mfsroot" at =
0xc0b0c244.=0A=
Dec 18 12:53:23  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc0b0c288.=0A=
Dec 18 12:53:23  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 18 12:53:23  kernel: Timecounter "TSC"  frequency 2527014644 Hz=0A=
Dec 18 12:53:23  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.01-MHz 686-class CPU)=0A=
Dec 18 12:53:23  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 18 12:53:23  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 18 12:53:23  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 18 12:53:23  kernel: avail memory =3D 509652992 (486 MB)=0A=
Dec 18 12:53:23  kernel: Pentium Pro MTRR support enabled=0A=
Dec 18 12:53:23  kernel: md0: Preloaded image </boot/mfsroot> 4423680 =
bytes at 0xc06877a4=0A=
Dec 18 12:53:23  kernel: npx0: <math processor> on motherboard=0A=
Dec 18 12:53:23  kernel: npx0: INT 16 interface=0A=
Dec 18 12:53:23  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 18 12:53:23  kernel: pcibios: BIOS version 2.10=0A=
Dec 18 12:53:23  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 18 12:53:23  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 18 12:53:23  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 18 12:53:23  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 18 12:53:23  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 18 12:53:23  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 18 12:53:23  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 18 12:53:23  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 18 12:53:23  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 18 12:53:23  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 18 12:53:23  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 18 12:53:23  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 18 12:53:23  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 18 12:53:23  kernel: isa0: <ISA bus> on isab0=0A=
Dec 18 12:53:23  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 18 12:53:23  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 18 12:53:23  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 18 12:53:23  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 18 12:53:23  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 18 12:53:23  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 18 12:53:23  kernel: usb0: USB revision 1.0=0A=
Dec 18 12:53:23  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:53:23  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 18 12:53:23  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 18 12:53:23  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 18 12:53:23  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 18 12:53:23  kernel: usb1: USB revision 1.0=0A=
Dec 18 12:53:23  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:53:23  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 18 12:53:23  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 18 12:53:23  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 18 12:53:23  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 18 12:53:23  kernel: usb2: USB revision 1.0=0A=
Dec 18 12:53:23  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:53:23  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 18 12:53:23  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 18 12:53:23  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 18 12:53:23  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 18 12:53:23  kernel: miibus0: <MII bus> on sis0=0A=
Dec 18 12:53:23  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 18 12:53:23  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 18 12:53:23  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 18 12:53:23  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 18 12:53:23  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 18 12:53:23  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 18 12:53:23  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 18 12:53:23  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 18 12:53:23  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 18 12:53:23  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 18 12:53:23  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 18 12:53:23  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 18 12:53:23  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 18 12:53:23  kernel: lpt0: Interrupt-driven port=0A=
Dec 18 12:53:23  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 18 12:53:23  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 18 12:53:23  kernel: sio0: type 16550A=0A=
Dec 18 12:53:23  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 18 12:53:23  kernel: sio1: type 16550A=0A=
Dec 18 12:53:23  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 18 12:53:23  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 18 12:53:23  kernel: kbd0 at atkbd0=0A=
Dec 18 12:53:23  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 18 12:53:23  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 18 12:53:23  kernel: pmtimer0 on isa0=0A=
Dec 18 12:53:23  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 18 12:53:23  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 18 12:53:23  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 18 12:53:23  kernel: Timecounters tick every 10.000 msec=0A=
Dec 18 12:53:23  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 18 12:53:23  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 18 12:53:23  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 18 12:53:23  kernel: Mounting root from ufs:/dev/md0=0A=
Dec 18 12:53:23  kernel: module_register: module pci/txp already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/txp failed to register: 17=0A=
Dec 18 12:53:23  kernel: interface sysvmsg.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:53:23  kernel: module_register: module pccard/xe already =
exists!=0A=
Dec 18 12:53:23  kernel: Module pccard/xe failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/pcn already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/pcn failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pcn/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module pcn/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/vr already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/vr failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module vr/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module vr/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/ste already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/ste failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module ste/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module ste/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module if_tun already exists!=0A=
Dec 18 12:53:23  kernel: Module if_tun failed to register: 17=0A=
Dec 18 12:53:23  kernel: can't re-use a leaf (if_tun_debug)!=0A=
Dec 18 12:53:23  kernel: module_register: module uhub/cue already exists!=0A=
Dec 18 12:53:23  kernel: Module uhub/cue failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module cardbus/xl already =
exists!=0A=
Dec 18 12:53:23  kernel: Module cardbus/xl failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/xl already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/xl failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module xl/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module xl/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/vx already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/vx failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module eisa/vx already exists!=0A=
Dec 18 12:53:23  kernel: Module eisa/vx failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pccard/ed already =
exists!=0A=
Dec 18 12:53:23  kernel: Module pccard/ed failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module ed/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module ed/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/ed already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/ed failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module isa/ed already exists!=0A=
Dec 18 12:53:23  kernel: Module isa/ed failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/bge already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/bge failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module bge/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module bge/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/wb already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/wb failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module wb/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module wb/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/em already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/em failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/rl already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/rl failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module cardbus/rl already =
exists!=0A=
Dec 18 12:53:23  kernel: Module cardbus/rl failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module rl/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module rl/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/sis already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/sis failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module sis/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module sis/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module cardbus/dc already =
exists!=0A=
Dec 18 12:53:23  kernel: Module cardbus/dc failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/dc already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/dc failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module dc/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module dc/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: can't re-use a leaf (dc_quick)!=0A=
Dec 18 12:53:23  kernel: interface sysvshm.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:53:23  kernel: module_register: module uhub/aue already exists!=0A=
Dec 18 12:53:23  kernel: Module uhub/aue failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module aue/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module aue/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: interface miibus.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:53:23  kernel: module_register: module pci/lnc already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/lnc failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module isa/lnc already exists!=0A=
Dec 18 12:53:23  kernel: Module isa/lnc failed to register: 17=0A=
Dec 18 12:53:23  kernel: interface sysvsem.1 already present in the KLD =
'kernel'!=0A=
Dec 18 12:53:23  kernel: module_register: module pccard/fe already =
exists!=0A=
Dec 18 12:53:23  kernel: Module pccard/fe failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module isa/fe already exists!=0A=
Dec 18 12:53:23  kernel: Module isa/fe failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/fxp already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/fxp failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module cardbus/fxp already =
exists!=0A=
Dec 18 12:53:23  kernel: Module cardbus/fxp failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module fxp/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module fxp/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: can't re-use a leaf (fxp_rnr)!=0A=
Dec 18 12:53:23  kernel: can't re-use a leaf (fxp_noflow)!=0A=
Dec 18 12:53:23  kernel: module_register: module uhub/kue already exists!=0A=
Dec 18 12:53:23  kernel: Module uhub/kue failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module pci/sf already exists!=0A=
Dec 18 12:53:23  kernel: Module pci/sf failed to register: 17=0A=
Dec 18 12:53:23  kernel: module_register: module sf/miibus already =
exists!=0A=
Dec 18 12:53:23  kernel: Module sf/miibus failed to register: 17=0A=
Dec 18 12:53:23  kernel: Waiting (max 60 seconds) for system process =
`vnlru' to stop...stopped=0A=
Dec 18 12:53:23  kernel: Waiting (max 60 seconds) for system process =
`bufdaemon' to stop...stopped=0A=
Dec 18 12:53:23  kernel: Waiting (max 60 seconds) for system process =
`syncer' to stop...stopped=0A=
Dec 18 12:53:23  kernel: =0A=
Dec 18 12:53:23  kernel: syncing disks, buffers remaining... 10 10 =0A=
Dec 18 12:53:23  kernel: done=0A=
Dec 18 12:53:23  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 18 12:53:23  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 18 12:53:23  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 18 12:53:23  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 18 12:53:23  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 18 12:53:23  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc06d4000.=0A=
Dec 18 12:53:23  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc06d4244.=0A=
Dec 18 12:53:23  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 18 12:53:23  kernel: Timecounter "TSC"  frequency 2527014200 Hz=0A=
Dec 18 12:53:23  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.01-MHz 686-class CPU)=0A=
Dec 18 12:53:23  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 18 12:53:23  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 18 12:53:23  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 18 12:53:23  kernel: avail memory =3D 514064384 (490 MB)=0A=
Dec 18 12:53:23  kernel: Pentium Pro MTRR support enabled=0A=
Dec 18 12:53:23  kernel: npx0: <math processor> on motherboard=0A=
Dec 18 12:53:23  kernel: npx0: INT 16 interface=0A=
Dec 18 12:53:23  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 18 12:53:23  kernel: pcibios: BIOS version 2.10=0A=
Dec 18 12:53:23  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 18 12:53:23  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 18 12:53:23  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 18 12:53:23  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 18 12:53:23  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 18 12:53:23  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 18 12:53:23  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 18 12:53:23  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 18 12:53:23  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 18 12:53:23  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 18 12:53:23  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 18 12:53:23  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 18 12:53:23  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 18 12:53:23  kernel: isa0: <ISA bus> on isab0=0A=
Dec 18 12:53:23  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 18 12:53:23  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 18 12:53:23  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 18 12:53:23  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 18 12:53:23  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 18 12:53:23  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 18 12:53:23  kernel: usb0: USB revision 1.0=0A=
Dec 18 12:53:23  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:53:23  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 18 12:53:23  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 18 12:53:23  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 18 12:53:23  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 18 12:53:23  kernel: usb1: USB revision 1.0=0A=
Dec 18 12:53:23  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:53:23  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 18 12:53:23  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 18 12:53:23  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 18 12:53:23  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 18 12:53:23  kernel: usb2: USB revision 1.0=0A=
Dec 18 12:53:23  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 12:53:23  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 18 12:53:23  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 18 12:53:23  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 18 12:53:23  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 18 12:53:23  kernel: miibus0: <MII bus> on sis0=0A=
Dec 18 12:53:23  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 18 12:53:23  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 18 12:53:23  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 18 12:53:23  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 18 12:53:23  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 18 12:53:23  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 18 12:53:23  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 18 12:53:23  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 18 12:53:23  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 18 12:53:23  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 18 12:53:23  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 18 12:53:23  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 18 12:53:23  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 18 12:53:23  kernel: lpt0: Interrupt-driven port=0A=
Dec 18 12:53:23  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 18 12:53:23  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 18 12:53:23  kernel: sio0: type 16550A=0A=
Dec 18 12:53:23  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 18 12:53:23  kernel: sio1: type 16550A=0A=
Dec 18 12:53:23  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 18 12:53:23  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 18 12:53:23  kernel: kbd0 at atkbd0=0A=
Dec 18 12:53:23  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 18 12:53:23  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 18 12:53:23  kernel: pmtimer0 on isa0=0A=
Dec 18 12:53:23  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 18 12:53:23  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 18 12:53:23  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 18 12:53:23  kernel: Timecounters tick every 10.000 msec=0A=
Dec 18 12:53:23  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 18 12:53:23  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 18 12:53:23  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 18 12:53:23  kernel: Mounting root from ufs:/dev/ad0s1a=0A=
Dec 18 12:53:34  login: ROOT LOGIN (root) ON ttyv0=0A=
Dec 18 12:55:50  kernel: cd9660: RockRidge Extension=0A=
Dec 18 12:56:11  kernel: ad0: WRITE command timeout tag=3D0 serv=3D0 - =
resetting=0A=
Dec 18 12:56:12  kernel: ata0: resetting devices ..=0A=
Dec 18 12:56:12  kernel: done=0A=
Dec 18 12:56:24  kernel: ad0: WRITE command timeout tag=3D0 serv=3D0 - =
resetting=0A=
Dec 18 12:56:24  kernel: ata0: resetting devices ..=0A=
Dec 18 12:56:24  kernel: done=0A=
Dec 18 12:56:46  kernel: ad0: WRITE command timeout tag=3D0 serv=3D0 - =
resetting=0A=
Dec 18 12:56:46  kernel: ata0: resetting devices ..=0A=
Dec 18 12:56:46  kernel: done=0A=
Dec 18 12:57:29  kernel: ad0: WRITE command timeout tag=3D0 serv=3D0 - =
resetting=0A=
Dec 18 12:57:29  kernel: ata0: resetting devices ..=0A=
Dec 18 12:57:29  kernel: done=0A=
Dec 18 13:00:45  kernel: ad0: WRITE command timeout tag=3D0 serv=3D0 - =
resetting=0A=
Dec 18 13:00:45  kernel: ata0: resetting devices ..=0A=
Dec 18 13:00:45  kernel: done=0A=
Dec 18 13:03:34  su: gurdial to root on /dev/ttyv0=0A=
Dec 18 13:05:08  shutdown: reboot by gurdial: =0A=
Dec 18 13:05:10  syslogd: exiting on signal 15=0A=
Dec 18 13:06:00  syslogd: kernel boot file is /boot/kernel/kernel=0A=
Dec 18 13:06:00  kernel: Waiting (max 60 seconds) for system process =
`vnlru' to stop...stopped=0A=
Dec 18 13:06:00  kernel: Waiting (max 60 seconds) for system process =
`bufdaemon' to stop...stopped=0A=
Dec 18 13:06:00  kernel: Waiting (max 60 seconds) for system process =
`syncer' to stop...stopped=0A=
Dec 18 13:06:00  kernel: =0A=
Dec 18 13:06:00  kernel: syncing disks, buffers remaining... 1 1 =0A=
Dec 18 13:06:00  kernel: done=0A=
Dec 18 13:06:00  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 18 13:06:00  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 18 13:06:00  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 18 13:06:00  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 18 13:06:00  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 18 13:06:00  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc06d4000.=0A=
Dec 18 13:06:00  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc06d4244.=0A=
Dec 18 13:06:00  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 18 13:06:00  kernel: Timecounter "TSC"  frequency 2527010904 Hz=0A=
Dec 18 13:06:00  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.01-MHz 686-class CPU)=0A=
Dec 18 13:06:00  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 18 13:06:00  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 18 13:06:00  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 18 13:06:00  kernel: avail memory =3D 514064384 (490 MB)=0A=
Dec 18 13:06:00  kernel: Pentium Pro MTRR support enabled=0A=
Dec 18 13:06:00  kernel: npx0: <math processor> on motherboard=0A=
Dec 18 13:06:00  kernel: npx0: INT 16 interface=0A=
Dec 18 13:06:00  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 18 13:06:00  kernel: pcibios: BIOS version 2.10=0A=
Dec 18 13:06:00  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 18 13:06:00  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 18 13:06:00  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 18 13:06:00  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 18 13:06:00  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 18 13:06:00  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 18 13:06:00  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 18 13:06:00  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 18 13:06:00  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 18 13:06:00  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 18 13:06:00  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 18 13:06:00  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 18 13:06:00  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 18 13:06:00  kernel: isa0: <ISA bus> on isab0=0A=
Dec 18 13:06:00  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 18 13:06:00  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 18 13:06:00  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 18 13:06:00  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 18 13:06:00  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 18 13:06:00  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 18 13:06:00  kernel: usb0: USB revision 1.0=0A=
Dec 18 13:06:00  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 13:06:00  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 18 13:06:00  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 18 13:06:00  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 18 13:06:00  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 18 13:06:00  kernel: usb1: USB revision 1.0=0A=
Dec 18 13:06:00  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 13:06:00  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 18 13:06:00  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 18 13:06:00  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 18 13:06:00  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 18 13:06:00  kernel: usb2: USB revision 1.0=0A=
Dec 18 13:06:00  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 13:06:00  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 18 13:06:00  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 18 13:06:00  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 18 13:06:00  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 18 13:06:00  kernel: miibus0: <MII bus> on sis0=0A=
Dec 18 13:06:00  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 18 13:06:00  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 18 13:06:00  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 18 13:06:00  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 18 13:06:00  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 18 13:06:00  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 18 13:06:00  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 18 13:06:00  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 18 13:06:00  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 18 13:06:00  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 18 13:06:00  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 18 13:06:00  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 18 13:06:00  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 18 13:06:00  kernel: lpt0: Interrupt-driven port=0A=
Dec 18 13:06:00  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 18 13:06:00  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 18 13:06:00  kernel: sio0: type 16550A=0A=
Dec 18 13:06:00  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 18 13:06:00  kernel: sio1: type 16550A=0A=
Dec 18 13:06:00  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 18 13:06:00  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 18 13:06:00  kernel: kbd0 at atkbd0=0A=
Dec 18 13:06:00  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 18 13:06:00  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 18 13:06:00  kernel: pmtimer0 on isa0=0A=
Dec 18 13:06:00  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 18 13:06:00  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 18 13:06:00  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 18 13:06:00  kernel: Timecounters tick every 10.000 msec=0A=
Dec 18 13:06:00  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 18 13:06:00  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 18 13:06:00  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 18 13:06:00  kernel: Mounting root from ufs:/dev/ad0s1a=0A=
Dec 18 13:09:19  shutdown: reboot by gurdial: =0A=
Dec 18 13:09:21  syslogd: exiting on signal 15=0A=
Dec 18 14:43:06  syslogd: kernel boot file is /boot/kernel/kernel=0A=
Dec 18 14:43:06  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 18 14:43:06  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 18 14:43:06  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 18 14:43:06  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 18 14:43:06  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 18 14:43:06  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc06d4000.=0A=
Dec 18 14:43:06  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc06d4244.=0A=
Dec 18 14:43:06  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 18 14:43:06  kernel: Timecounter "TSC"  frequency 2527015772 Hz=0A=
Dec 18 14:43:06  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.02-MHz 686-class CPU)=0A=
Dec 18 14:43:06  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 18 14:43:06  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 18 14:43:06  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 18 14:43:06  kernel: avail memory =3D 514064384 (490 MB)=0A=
Dec 18 14:43:06  kernel: Pentium Pro MTRR support enabled=0A=
Dec 18 14:43:06  kernel: npx0: <math processor> on motherboard=0A=
Dec 18 14:43:06  kernel: npx0: INT 16 interface=0A=
Dec 18 14:43:06  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 18 14:43:06  kernel: pcibios: BIOS version 2.10=0A=
Dec 18 14:43:06  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 18 14:43:06  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 18 14:43:06  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 18 14:43:06  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 18 14:43:06  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 18 14:43:06  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 18 14:43:06  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 18 14:43:06  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 18 14:43:06  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 18 14:43:06  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 18 14:43:06  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 18 14:43:06  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 18 14:43:06  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 18 14:43:06  kernel: isa0: <ISA bus> on isab0=0A=
Dec 18 14:43:06  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 18 14:43:06  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 18 14:43:06  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 18 14:43:06  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 18 14:43:06  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 18 14:43:06  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 18 14:43:06  kernel: usb0: USB revision 1.0=0A=
Dec 18 14:43:06  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 14:43:06  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 18 14:43:06  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 18 14:43:06  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 18 14:43:06  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 18 14:43:06  kernel: usb1: USB revision 1.0=0A=
Dec 18 14:43:06  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 14:43:06  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 18 14:43:06  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 18 14:43:06  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 18 14:43:06  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 18 14:43:06  kernel: usb2: USB revision 1.0=0A=
Dec 18 14:43:06  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 18 14:43:06  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 18 14:43:06  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 18 14:43:06  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 18 14:43:06  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 18 14:43:06  kernel: miibus0: <MII bus> on sis0=0A=
Dec 18 14:43:06  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 18 14:43:06  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 18 14:43:06  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 18 14:43:06  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 18 14:43:06  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 18 14:43:06  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 18 14:43:06  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 18 14:43:06  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 18 14:43:06  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 18 14:43:06  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 18 14:43:06  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 18 14:43:06  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 18 14:43:06  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 18 14:43:06  kernel: lpt0: Interrupt-driven port=0A=
Dec 18 14:43:06  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 18 14:43:06  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 18 14:43:06  kernel: sio0: type 16550A=0A=
Dec 18 14:43:06  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 18 14:43:06  kernel: sio1: type 16550A=0A=
Dec 18 14:43:06  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 18 14:43:06  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 18 14:43:06  kernel: kbd0 at atkbd0=0A=
Dec 18 14:43:06  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 18 14:43:06  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 18 14:43:06  kernel: pmtimer0 on isa0=0A=
Dec 18 14:43:06  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 18 14:43:06  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 18 14:43:06  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 18 14:43:06  kernel: Timecounters tick every 10.000 msec=0A=
Dec 18 14:43:06  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 18 14:43:06  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 18 14:43:06  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 18 14:43:06  kernel: Mounting root from ufs:/dev/ad0s1a=0A=
Dec 18 14:43:27  su: gurdial to root on /dev/ttyv0=0A=
Dec 18 14:58:22  su: gurdial to root on /dev/ttyv0=0A=
Dec 18 15:15:09  kernel: cd9660: RockRidge Extension=0A=
Dec 18 16:37:48  kernel: cd9660: RockRidge Extension=0A=
Dec 18 16:55:29  kernel: acd0: READ_BIG - MEDIUM ERROR asc=3D0x02 =
ascq=3D0x00 error=3D0x00=0A=
Dec 18 16:57:37  kernel: cd9660: RockRidge Extension=0A=
Dec 18 18:12:52  shutdown: power-down by gurdial: =0A=
Dec 18 18:12:54  syslogd: exiting on signal 15=0A=
Dec 19 09:05:41  syslogd: kernel boot file is /boot/kernel/kernel=0A=
Dec 19 09:05:41  kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Dec 19 09:05:41  kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994=0A=
Dec 19 09:05:41  kernel: The Regents of the University of California. =
All rights reserved.=0A=
Dec 19 09:05:41  kernel: FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT =
2003=0A=
Dec 19 09:05:41  kernel: =
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Dec 19 09:05:41  kernel: Preloaded elf kernel "/boot/kernel/kernel" at =
0xc06d4000.=0A=
Dec 19 09:05:41  kernel: Preloaded elf module "/boot/kernel/acpi.ko" at =
0xc06d4244.=0A=
Dec 19 09:05:41  kernel: Timecounter "i8254"  frequency 1193182 Hz=0A=
Dec 19 09:05:41  kernel: Timecounter "TSC"  frequency 2527015804 Hz=0A=
Dec 19 09:05:41  kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz =
(2527.02-MHz 686-class CPU)=0A=
Dec 19 09:05:41  kernel: Origin =3D "GenuineIntel"  Id =3D 0xf27  =
Stepping =3D 7=0A=
Dec 19 09:05:41  kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Dec 19 09:05:41  kernel: real memory  =3D 536854528 (511 MB)=0A=
Dec 19 09:05:41  kernel: avail memory =3D 514064384 (490 MB)=0A=
Dec 19 09:05:41  kernel: Pentium Pro MTRR support enabled=0A=
Dec 19 09:05:41  kernel: npx0: <math processor> on motherboard=0A=
Dec 19 09:05:41  kernel: npx0: INT 16 interface=0A=
Dec 19 09:05:41  kernel: acpi0: <ASUS   P4S533-E> on motherboard=0A=
Dec 19 09:05:41  kernel: pcibios: BIOS version 2.10=0A=
Dec 19 09:05:41  kernel: Using $PIR table, 11 entries at 0xc00f1750=0A=
Dec 19 09:05:41  kernel: acpi0: power button is handled as a fixed =
feature programming model.=0A=
Dec 19 09:05:41  kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
Dec 19 09:05:41  kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port =
0xe408-0xe40b on acpi0=0A=
Dec 19 09:05:41  kernel: acpi_cpu0: <CPU> on acpi0=0A=
Dec 19 09:05:41  kernel: acpi_button0: <Power Button> on acpi0=0A=
Dec 19 09:05:41  kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff =
on acpi0=0A=
Dec 19 09:05:41  kernel: pci0: <ACPI PCI bus> on pcib0=0A=
Dec 19 09:05:41  kernel: agp0: <SIS Generic host to PCI bridge> mem =
0xe8000000-0xebffffff at device 0.0 on pci0=0A=
Dec 19 09:05:41  kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on =
pci0=0A=
Dec 19 09:05:41  kernel: pci1: <ACPI PCI bus> on pcib1=0A=
Dec 19 09:05:41  kernel: pci1: <display, VGA> at device 0.0 (no driver =
attached)=0A=
Dec 19 09:05:41  kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
Dec 19 09:05:41  kernel: isa0: <ISA bus> on isab0=0A=
Dec 19 09:05:41  kernel: atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
Dec 19 09:05:41  kernel: ata0: at 0x1f0 irq 14 on atapci0=0A=
Dec 19 09:05:41  kernel: ata1: at 0x170 irq 15 on atapci0=0A=
Dec 19 09:05:41  kernel: ohci0: <SiS 5571 USB controller> mem =
0xe6000000-0xe6000fff irq 9 at device 3.0 on pci0=0A=
Dec 19 09:05:41  kernel: usb0: OHCI version 1.0, legacy support=0A=
Dec 19 09:05:41  kernel: usb0: <SiS 5571 USB controller> on ohci0=0A=
Dec 19 09:05:41  kernel: usb0: USB revision 1.0=0A=
Dec 19 09:05:41  kernel: uhub0: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 19 09:05:41  kernel: uhub0: 2 ports with 2 removable, self powered=0A=
Dec 19 09:05:41  kernel: ohci1: <SiS 5571 USB controller> mem =
0xe5800000-0xe5800fff irq 9 at device 3.1 on pci0=0A=
Dec 19 09:05:41  kernel: usb1: OHCI version 1.0, legacy support=0A=
Dec 19 09:05:41  kernel: usb1: <SiS 5571 USB controller> on ohci1=0A=
Dec 19 09:05:41  kernel: usb1: USB revision 1.0=0A=
Dec 19 09:05:41  kernel: uhub1: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 19 09:05:41  kernel: uhub1: 2 ports with 2 removable, self powered=0A=
Dec 19 09:05:41  kernel: ohci2: <SiS 5571 USB controller> mem =
0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0=0A=
Dec 19 09:05:41  kernel: usb2: OHCI version 1.0, legacy support=0A=
Dec 19 09:05:41  kernel: usb2: <SiS 5571 USB controller> on ohci2=0A=
Dec 19 09:05:41  kernel: usb2: USB revision 1.0=0A=
Dec 19 09:05:41  kernel: uhub2: SiS OHCI root hub, class 9/0, rev =
1.00/1.00, addr 1=0A=
Dec 19 09:05:41  kernel: uhub2: 2 ports with 2 removable, self powered=0A=
Dec 19 09:05:41  kernel: pci0: <serial bus, USB> at device 3.3 (no =
driver attached)=0A=
Dec 19 09:05:41  kernel: sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff =
mem 0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
Dec 19 09:05:41  kernel: sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
Dec 19 09:05:41  kernel: miibus0: <MII bus> on sis0=0A=
Dec 19 09:05:41  kernel: rlphy0: <RTL8201L 10/100 media interface> on =
miibus0=0A=
Dec 19 09:05:41  kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, auto=0A=
Dec 19 09:05:41  kernel: pci0: <multimedia, audio> at device 5.0 (no =
driver attached)=0A=
Dec 19 09:05:41  kernel: pci0: <bridge, PCI-unknown> at device 9.0 (no =
driver attached)=0A=
Dec 19 09:05:41  kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
Dec 19 09:05:41  kernel: fdc0: FIFO enabled, 8 bytes threshold=0A=
Dec 19 09:05:41  kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
Dec 19 09:05:41  kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 =
on acpi0=0A=
Dec 19 09:05:41  kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in =
COMPATIBLE mode=0A=
Dec 19 09:05:41  kernel: ppc0: FIFO with 16/16/16 bytes threshold=0A=
Dec 19 09:05:41  kernel: ppbus0: <Parallel port bus> on ppc0=0A=
Dec 19 09:05:41  kernel: plip0: <PLIP network interface> on ppbus0=0A=
Dec 19 09:05:41  kernel: lpt0: <Printer> on ppbus0=0A=
Dec 19 09:05:41  kernel: lpt0: Interrupt-driven port=0A=
Dec 19 09:05:41  kernel: ppi0: <Parallel I/O> on ppbus0=0A=
Dec 19 09:05:41  kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
Dec 19 09:05:41  kernel: sio0: type 16550A=0A=
Dec 19 09:05:41  kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
Dec 19 09:05:41  kernel: sio1: type 16550A=0A=
Dec 19 09:05:41  kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0=0A=
Dec 19 09:05:41  kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
Dec 19 09:05:41  kernel: kbd0 at atkbd0=0A=
Dec 19 09:05:41  kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
Dec 19 09:05:41  kernel: psm0: model Generic PS/2 mouse, device ID 0=0A=
Dec 19 09:05:41  kernel: pmtimer0 on isa0=0A=
Dec 19 09:05:41  kernel: sc0: <System console> at flags 0x100 on isa0=0A=
Dec 19 09:05:41  kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
Dec 19 09:05:41  kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0=0A=
Dec 19 09:05:41  kernel: Timecounters tick every 10.000 msec=0A=
Dec 19 09:05:41  kernel: acpi_cpu: throttling enabled, 8 steps (100% to =
12.5%), currently 100.0%=0A=
Dec 19 09:05:41  kernel: ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at =
ata0-master UDMA66=0A=
Dec 19 09:05:41  kernel: acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Dec 19 09:05:41  kernel: Mounting root from ufs:/dev/ad0s1a=0A=
Dec 19 09:06:08  su: gurdial to root on /dev/ttyv0=0A=

------=_NextPart_000_000A_01C3C61B.0968DDF0
Content-Type: text/plain;
	name="HWLOG1.TXT"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="HWLOG1.TXT"

Copyright (c) 1992-2003 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
	The Regents of the University of California. All rights reserved.=0A=
FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT 2003=0A=
    root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A=
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.=0A=
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d4244.=0A=
Timecounter "i8254"  frequency 1193182 Hz=0A=
Timecounter "TSC"  frequency 2527015772 Hz=0A=
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2527.02-MHz 686-class CPU)=0A=
  Origin =3D "GenuineIntel"  Id =3D 0xf27  Stepping =3D 7=0A=
  =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
real memory  =3D 536854528 (511 MB)=0A=
avail memory =3D 514064384 (490 MB)=0A=
Pentium Pro MTRR support enabled=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
acpi0: <ASUS   P4S533-E> on motherboard=0A=
pcibios: BIOS version 2.10=0A=
Using $PIR table, 11 entries at 0xc00f1750=0A=
acpi0: power button is handled as a fixed feature programming model.=0A=
Timecounter "ACPI-fast"  frequency 3579545 Hz=0A=
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0=0A=
acpi_cpu0: <CPU> on acpi0=0A=
acpi_button0: <Power Button> on acpi0=0A=
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0A=
pci0: <ACPI PCI bus> on pcib0=0A=
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at =
device 0.0 on pci0=0A=
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0=0A=
pci1: <ACPI PCI bus> on pcib1=0A=
pci1: <display, VGA> at device 0.0 (no driver attached)=0A=
isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <SiS 962 UDMA133 controller> port =
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 2.5 on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
ohci0: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 9 at =
device 3.0 on pci0=0A=
usb0: OHCI version 1.0, legacy support=0A=
usb0: <SiS 5571 USB controller> on ohci0=0A=
usb0: USB revision 1.0=0A=
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
ohci1: <SiS 5571 USB controller> mem 0xe5800000-0xe5800fff irq 9 at =
device 3.1 on pci0=0A=
usb1: OHCI version 1.0, legacy support=0A=
usb1: <SiS 5571 USB controller> on ohci1=0A=
usb1: USB revision 1.0=0A=
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
ohci2: <SiS 5571 USB controller> mem 0xe5000000-0xe5000fff irq 9 at =
device 3.2 on pci0=0A=
usb2: OHCI version 1.0, legacy support=0A=
usb2: <SiS 5571 USB controller> on ohci2=0A=
usb2: USB revision 1.0=0A=
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
pci0: <serial bus, USB> at device 3.3 (no driver attached)=0A=
sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff mem =
0xe4000000-0xe4000fff irq 5 at device 4.0 on pci0=0A=
sis0: Ethernet address: 00:e0:18:e2:7d:c0=0A=
miibus0: <MII bus> on sis0=0A=
rlphy0: <RTL8201L 10/100 media interface> on miibus0=0A=
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
pci0: <multimedia, audio> at device 5.0 (no driver attached)=0A=
pci0: <bridge, PCI-unknown> at device 9.0 (no driver attached)=0A=
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port =
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/16 bytes threshold=0A=
ppbus0: <Parallel port bus> on ppc0=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
sio0: type 16550A=0A=
sio1 port 0x2f8-0x2ff irq 3 on acpi0=0A=
sio1: type 16550A=0A=
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
pmtimer0 on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
Timecounters tick every 10.000 msec=0A=
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%=0A=
ad0: 12982MB <Maxtor 91360U4> [26377/16/63] at ata0-master UDMA66=0A=
acd0: CD-RW <ASUS CRW-4816A> at ata1-slave PIO4=0A=
Mounting root from ufs:/dev/ad0s1a=0A=
cd9660: RockRidge Extension=0A=
cd9660: RockRidge Extension=0A=
acd0: READ_BIG - MEDIUM ERROR asc=3D0x02 ascq=3D0x00 error=3D0x00=0A=
cd9660: RockRidge Extension=0A=

------=_NextPart_000_000A_01C3C61B.0968DDF0--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000d01c3c61b$0a698510$1c77fea9>