Date: Tue, 28 Sep 2004 20:30:42 +0200 From: Jonas Wolz <jonas.wolz@freenet.de> To: freebsd-current@freebsd.org Subject: "ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=23444158" with BETA6 Message-ID: <200409282030.42870.jonas.wolz@freenet.de>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_S3aWB5bNQ54nbHk
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hi,
this is kind of a "me too"-posting for the similar issue (with BETA5) reported
last week on this list.
On my Acer Aspire 1705SCi "laptop" (P4 processor with Hyperthreading enabled)
I tried booting BETA6 from the disc2 CD-ROM today, which seems to work fine
except that the error message
"ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=234441585"
is printed once on boot-up (and just on boot-up so far).
It doesn't matter if I boot with ACPI enabled or disabled.
The reported LBA is always the same (the harddisk's SMART data looks fine,
however).
Nevertheless, I can read from the hard disk and mount file systems on it
without apparent problems (and without the message getting printed again).
FreeBSD 5.2.1 (currently installed on that computer) doesn't have this
problem.
I've attached the dmesg of BETA6.
Jonas Wolz
--Boundary-00=_S3aWB5bNQ54nbHk
Content-Type: text/plain;
charset="us-ascii";
name="dmesg.nobby.BETA6"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.nobby.BETA6"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA6 #0: Sat Sep 25 19:41:14 UTC 2004
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e44000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0e4426c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e442b0.
Calibrating clock(s) ... i8254 clock: 1193202 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3054282612 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3054.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 534708224 (509 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001029000 - 0x000000001f4c8fff, 508166144 bytes (124064 pages)
avail memory = 509399040 (485 MB)
Table 'FACP' at 0x1fdfaecf
Table 'SSDT' at 0x1fdfaf43
Table 'APIC' at 0x1fdfaf7a
MADT: Found table at 0x1fdfaf7a
MP Configuration Table version 1.4 found at 0xc009fc70
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f6e60
bios32: Entry = 0xfd840 (c00fd840) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd840+0x186
pnpbios: Found PnP BIOS data at 0xc00f6ee0
pnpbios: Entry = f0000:b303 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: active-high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc1db5c00 StartNode 0xc1db5c00 ReturnNode 0
ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001048
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06501039)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdf50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x41 7 10
embedded 0 1 B 0x43 5 10
embedded 0 2 B 0x42 3 4
embedded 0 2 C 0x43 5 10
embedded 0 3 A 0x60 7 10
embedded 0 3 B 0x61 7 10
embedded 0 3 C 0x62 7 10
embedded 0 3 D 0x63 7 10
embedded 0 4 A 0x44 7 10
embedded 0 10 A 0x42 3 4
embedded 0 11 A 0x43 5 10
embedded 0 11 B 0x44 7 10
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKA._CRS] (Node 0xc1d6da60), AE_TYPE
can't fetch resources for \\_SB_.PCI0.LPCB.LNKA - AE_TYPE
ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKC._CRS] (Node 0xc1d6d860), AE_TYPE
can't fetch resources for \\_SB_.PCI0.LPCB.LNKC - AE_TYPE
ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKD._CRS] (Node 0xc1d6d760), AE_TYPE
can't fetch resources for \\_SB_.PCI0.LPCB.LNKD - AE_TYPE
ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKE._CRS] (Node 0xc1d6d660), AE_TYPE
can't fetch resources for \\_SB_.PCI0.LPCB.LNKE - AE_TYPE
ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKF._CRS] (Node 0xc1db2920), AE_TYPE
can't fetch resources for \\_SB_.PCI0.LPCB.LNKF - AE_TYPE
ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKG._CRS] (Node 0xc1db2820), AE_TYPE
can't fetch resources for \\_SB_.PCI0.LPCB.LNKG - AE_TYPE
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 50 us
acpi_ec0: info: new max delay is 790 us
acpi_ec0: info: new max delay is 1000 us
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base e0000000, size 26, enabled
found-> vendor=0x1039, dev=0x0650, revid=0x80
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0001, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x14
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e4000000, size 12, memory disabled
found-> vendor=0x1039, dev=0x7007, revid=0x00
bus=0, slot=2, func=3
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001000, size 4, enabled
found-> vendor=0x1039, dev=0x5513, revid=0x00
bus=0, slot=2, func=5
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00001400, size 8, port disabled
map[14]: type 4, range 32, base 00001080, size 7, enabled
found-> vendor=0x1039, dev=0x7013, revid=0xa0
bus=0, slot=2, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 00001800, size 7, enabled
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 18
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=18
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4001000, size 12, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 20
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=20
map[10]: type 1, range 32, base e4002000, size 12, enabled
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 21
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=21
map[10]: type 1, range 32, base e4003000, size 12, enabled
pcib0: matched entry for 0.3.INTC
pcib0: slot 3 INTC hardwired to IRQ 22
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=22
map[10]: type 1, range 32, base e4004000, size 12, memory disabled
found-> vendor=0x1039, dev=0x7002, revid=0x00
bus=0, slot=3, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base e4005000, size 12, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 19
found-> vendor=0x1039, dev=0x0900, revid=0x91
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=19
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x1217, dev=0x6972, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e4006000, size 12, memory disabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 18
found-> vendor=0x1260, dev=0x3872, revid=0x01
bus=0, slot=11, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0010, statreg=0x0290, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <SiS 650 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe5000000-0xe5ffffff
pcib1: prefetched decode 0xe8000000-0xefffffff
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base e5000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xe5000000-0xe5ffffff
map[14]: type 3, range 32, base e8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x10de, dev=0x031a, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: <SiS 7007> mem 0xe4000000-0xe4000fff at device 2.3 on pci0
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4000000
pcib0: matched entry for 0.2.INTB
pcib0: slot 2 INTB hardwired to IRQ 17
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:0c:a4:05
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:0c:a4:05
fwe0: bpf attached
fwe0: Ethernet address: 02:c0:9f:0c:a4:05
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiS 962/963 UDMA133 controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
pci0: <simple comms> at device 2.6 (no driver attached)
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xe4001000-0xe4001fff irq 20 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4001000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe4002000-0xe4002fff irq 21 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4002000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xe4003000-0xe4003fff irq 22 at device 3.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4003000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ukbd0: Cherry Mikroschalter My3000 keyboard, rev 1.00/9.08, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
pci0: <serial bus, USB> at device 3.3 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0x2000-0x20ff mem 0xe4005000-0xe4005fff irq 19 at device 4.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
miibus0: <MII bus> on sis0
acphy0: <AC101L 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:c0:9f:28:24:60
sis0: [MPSAFE]
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> at device 10.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 17
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x69721217 0x04100007 0x06070000 0x00024000
0x10: 0x80000000 0x020000a0 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x04000111
0x40: 0x00281025 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01881882
0x90: 0x00008002 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04100 0x00000000 0x00000001
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x08004000 0x028203ca 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
wi0: <Intersil Prism3> mem 0xe4006000-0xe4006fff irq 18 at device 11.0 on pci0
wi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4006000
wi0: [MPSAFE]
wi0: using RF:PRISM3(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.1), Station (1.5.6)
wi0: bpf attached
wi0: Ethernet address: 00:02:8a:a0:8a:96
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xdc000-0xe3fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x81 0x81 0x81 0x81
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 3054282612 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09b6c5c
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 130us
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
ata0-master: setting PIO4 on SiS 5513 chip
ata0-master: setting UDMA33 on SiS 5513 chip
acpi_ec0: info: new max delay is 11000 us
ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc1db5c00 StartNode 0xc1db5c00 ReturnNode 0
ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND
ACPI-1303: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1db5b40), AE_NOT_FOUND
acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND
acpi_cmbat0: battery initialization done, tried 1 times
acd0: <QSI CD-RW/DVD-ROM SBW-242/UX08> CDRW drive at ata0 as master
acd0: read 2751KB/s (2751KB/s) write 1720KB/s (1720KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin
ata1-master: setting PIO4 on SiS 5513 chip
acpi_tz0: switched from _AC0 to NONE: 40.0C
ata1-master: setting UDMA100 on SiS 5513 chip
ad2: <ST3120022A/3.04> ATA-6 disk at ata1-master
ad2: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad2
ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=234441585
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=d0 ostat1=d0
ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ad2: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ad2: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ad2: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: resetting done ..
ad2: pio=0x0c wdma=0x22 udma=0x45 cable=40pin
ad2: setting PIO4 on SiS 5513 chip
ad2: setting UDMA100 on SiS 5513 chip
ata1: device config done ..
ar: FreeBSD check1 failed
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:58588992
[1] f:00 typ:15 s(CHS):1023/254/63 e(CHS):1023/254/63 s:58589055 l:144103050
[2] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:212957640 l:21478905
[3] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:202692105 l:10265535
GEOM: Configure ad2s1, start 32256 length 29997563904 end 29997596159
GEOM: Configure ad2s2, start 29997596160 length 73780761600 end 103778357759
GEOM: Configure ad2s3, start 109034311680 length 10997199360 end 120031511039
GEOM: Configure ad2s4, start 103778357760 length 5255953920 end 109034311679
MBREXT Slice 5 on ad2s2:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2008062
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:2008125 l:58492665
GEOM: Configure ad2s5, start 32256 length 1028127744 end 1028159999
MBREXT Slice 6 on ad2s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:58492602
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:60500790 l:96390
GEOM: Configure ad2s6, start 1028192256 length 29948212224 end 30976404479
MBREXT Slice 7 on ad2s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:96327
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:60597180 l:63874440
GEOM: Configure ad2s7, start 30976436736 length 49319424 end 31025756159
MBREXT Slice 8 on ad2s2:
[0] f:00 typ:11 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:63874377
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:124471620 l:96390
GEOM: Configure ad2s8, start 31025788416 length 32703681024 end 63729469439
MBREXT Slice 9 on ad2s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:96327
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:124568010 l:19535040
GEOM: Configure ad2s9, start 63729501696 length 49319424 end 63778821119
MBREXT Slice 10 on ad2s2:
[0] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:19534977
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s10, start 63778853376 length 10001908224 end 73780761599
GEOM: Configure ad2s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad2s3b, start 134217728 length 536870912 end 671088639
GEOM: Configure ad2s3c, start 0 length 10997199360 end 10997199359
GEOM: Configure ad2s3d, start 671088640 length 268435456 end 939524095
GEOM: Configure ad2s3e, start 939524096 length 268435456 end 1207959551
GEOM: Configure ad2s3f, start 1207959552 length 9789239808 end 10997199359
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
--Boundary-00=_S3aWB5bNQ54nbHk--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409282030.42870.jonas.wolz>