Date: Tue, 4 Feb 2003 13:00:11 -0500 (EST) From: Mike Lambert <lambert@jeol.com> To: stable@FreeBSD.ORG Subject: IBM x335 Broadcom BCM5703 NICs not detected by 4.7-R Message-ID: <Pine.A41.4.44.0302041239520.31774-100000@bosch.jeol.com>
next in thread | raw e-mail | index | archive | help
Greetings,
I am attempting to configure FreeBSD 4.7-RELEASE to run on an IBM
xSeries 335. The two motherboard Broadcom Gigabit Ethernet devices are
not detected by the kernel. Relevant output of 'boot -v'...
pcib2: <Host to PCI bridge> on motherboard
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 64, base f5ff0000, size 16
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 64, base f5fe0000, size 16
pci3: <PCI bus> on pcib2
pci3: <unknown card> (vendor=0x14e4, dev=0x16a7) at 1.0 irq 11
pci3: <unknown card> (vendor=0x14e4, dev=0x16a7) at 2.0 irq 3
and 'pciconf -lv'...
none1@pci3:1:0: class=0x020000 card=0x026f1014 chip=0x16a714e4
rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5703X Gigabit Ethernet'
class = network
subclass = ethernet
none2@pci3:2:0: class=0x020000 card=0x026f1014 chip=0x16a714e4
rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5703X Gigabit Ethernet'
class = network
subclass = ethernet
I fiddled with BIOS settings (no "PnP OS" option) and tried a stripped
down kernel with no success. Installing a 3c905 PCI card works fine, but
I would prefer to use the built in NICs.
Any suggestions?
Regards,
Mike Lambert
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.A41.4.44.0302041239520.31774-100000>