Date: Wed, 7 Nov 2001 13:26:48 +0100 From: "Erik Nygren" <systemica@swipnet.se> To: <freebsd-questions@freebsd.org> Subject: cdrdao 1.1.5 from ports cannot see my Plextor CDR Message-ID: <040a01c16787$78eb0a80$2e79a8c0@skalman>
next in thread | raw e-mail | index | archive | help
I have a little troble getting cdrdao to work with FreeBSD RELENG_4_4. I have installed cdrdao from ports, and it can't detect my CD-R on = SCSI-target 6. A CD-ROM on SCSI-target 5 is detected with no problem. cdrecord have the = same problem. Appended is a short sample from what goes wrong (tried = just a disk-info from CD-ROM and CD-R, cdrecord -scanbus and camcontrol = devlist). If any more information is needed, feel free to ask. Regards Erik Nygren <----cut here----> lurvas# cdrdao disk-info --device 0,5,0 --driver generic-mmc Cdrdao version 1.1.5 - (C) Andreas Mueller <andreas@daneb.de> SCSI interface library - (C) Joerg Schilling L-EC encoding library - (C) Heiko Eissfeldt Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver = tables. Using libscg version 'schily-0.5' 0,5,0: PIONEER CD-ROM DR-104X Rev: 0022 Using driver: Generic SCSI-3/MMC - Version 1.2 (options 0x0000) That data below may not reflect the real status of the inserted medium if a simulation run was performed before. Reload the medium in this = case. CD-RW : n/a Total Capacity : n/a CD-R medium : n/a Recording Speed : n/a CD-R empty : n/a lurvas# cdrdao disk-info --device 0,6,0 --driver generic-mmc Cdrdao version 1.1.5 - (C) Andreas Mueller <andreas@daneb.de> SCSI interface library - (C) Joerg Schilling L-EC encoding library - (C) Heiko Eissfeldt Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver = tables. ERROR: Cannot open SCSI device '0,6,0':=20 ERROR: Please use option '--device bus,id,lun', e.g. --device 0,6,0 ERROR: Cannot setup device 0,6,0. lurvas# cdrecord -scanbus Cdrecord 1.10 (i386-unknown-freebsd4.2) Copyright (C) 1995-2001 J=F6rg = Schilling Using libscg version 'schily-0.5' scsibus0: 0,0,0 0) 'MICROP ' '4421-07 0502SJ' '0502' Disk 0,1,0 1) 'MICROP ' '4421-07 0502SJ' '0502' Disk 0,2,0 2) 'WDIGTL ' 'ENTERPRISE ' '1.80' Disk 0,3,0 3) 'WDIGTL ' 'ENTERPRISE ' '1.70' Disk 0,4,0 4) 'QUANTUM ' 'FIREBALL ST6.4S ' '0F0C' Disk 0,5,0 5) 'PIONEER ' 'CD-ROM DR-104X ' '0022' Removable = CD-ROM 0,6,0 6) * 0,7,0 7) * lurvas# camcontrol devlist <MICROP 4421-07 0502SJ 0502> at scbus0 target 0 lun 0 (pass0,da0) <MICROP 4421-07 0502SJ 0502> at scbus0 target 1 lun 0 (pass1,da1) <WDIGTL ENTERPRISE 1.80> at scbus0 target 2 lun 0 (pass2,da2) <WDIGTL ENTERPRISE 1.70> at scbus0 target 3 lun 0 (pass3,da3) <QUANTUM FIREBALL ST6.4S 0F0C> at scbus0 target 4 lun 0 (pass4,da4) <PIONEER CD-ROM DR-104X 0022> at scbus0 target 5 lun 0 (pass5,cd0) <PLEXTOR CD-R PX-R820T 1.03> at scbus0 target 6 lun 0 (pass6,cd1) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?040a01c16787$78eb0a80$2e79a8c0>