Date: Fri, 13 Apr 2012 20:23:33 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r234235 - head/sys/mips/conf Message-ID: <201204132023.q3DKNXuD095823@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Fri Apr 13 20:23:32 2012 New Revision: 234235 URL: http://svn.freebsd.org/changeset/base/234235 Log: Flesh out the rest of the AP96 board/config. Modified: head/sys/mips/conf/AP96 head/sys/mips/conf/AP96.hints Modified: head/sys/mips/conf/AP96 ============================================================================== --- head/sys/mips/conf/AP96 Fri Apr 13 20:22:08 2012 (r234234) +++ head/sys/mips/conf/AP96 Fri Apr 13 20:23:32 2012 (r234235) @@ -17,19 +17,26 @@ include "AR71XX_BASE" ident "AP96" hints "AP96.hints" -# GEOM modules -device geom_redboot # to get access to the SPI flash partitions -device geom_uzip # compressed in-memory filesystem hackery! -options GEOM_UZIP - -options ROOTDEVNAME=\"ufs:md0.uzip\" options AR71XX_REALMEM=64*1024*1024 options AR71XX_ENV_UBOOT -# options MD_ROOT -# options MD_ROOT_SIZE="6144" +# For DOS - enable if required +options GEOM_PART_BSD +options GEOM_PART_MBR +options MSDOSFS + +# uncompress - to boot read-only lzma natively from flash +device geom_uzip +options GEOM_UZIP + +# Used for the static uboot partition map +device geom_map + +# Boot off of the rootfs, as defined in the geom_map setup. +options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" +# Options needed for the EEPROM based calibration/PCI configuration data. options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash options ATH_EEPROM_FIRMWARE # Use EEPROM from flash device firmware # Used by the above Modified: head/sys/mips/conf/AP96.hints ============================================================================== --- head/sys/mips/conf/AP96.hints Fri Apr 13 20:22:08 2012 (r234234) +++ head/sys/mips/conf/AP96.hints Fri Apr 13 20:23:32 2012 (r234235) @@ -26,3 +26,52 @@ hint.pcib.0.bus.0.18.0.ath_fixup_size=40 hint.ath.0.eeprom_firmware="pcib.0.bus.0.17.0.eeprom_firmware" hint.ath.1.eeprom_firmware="pcib.0.bus.0.18.0.eeprom_firmware" +# The default flash layout: +# uboot: 192k +# env: 64k +# rootfs: 6144k +# uimage (kernel): 1728k +# caldata: 64k +# +# bootargs=console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init +# mtdparts=ar7100-nor0:192k(uboot),64k(env),6144k(rootfs),1728k(uImage),64k(caldata) mem=64M + +# +# We steal 64k from the end of rootfs to store the local config. + +hint.map.0.at="flash/spi0" +hint.map.0.start=0x00000000 +hint.map.0.end=0x000030000 +hint.map.0.name="uboot" +hint.map.0.readonly=1 + +hint.map.1.at="flash/spi0" +hint.map.1.start=0x00030000 +hint.map.1.end=0x00040000 +hint.map.1.name="uboot-env" +hint.map.1.readonly=1 + +hint.map.2.at="flash/spi0" +hint.map.2.start=0x00040000 +hint.map.2.end=0x00630000 +hint.map.2.name="rootfs" +hint.map.2.readonly=1 + +hint.map.3.at="flash/spi0" +hint.map.3.start=0x00630000 +hint.map.3.end=0x00640000 +hint.map.3.name="cfg" +hint.map.3.readonly=0 + +hint.map.4.at="flash/spi0" +hint.map.4.start=0x00640000 +hint.map.4.end=0x007f0000 +hint.map.4.name="kernel" +hint.map.4.readonly=1 + +hint.map.5.at="flash/spi0" +hint.map.5.start=0x007f0000 +hint.map.5.end=0x00800000 +hint.map.5.name="art" +hint.map.5.readonly=1 +
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201204132023.q3DKNXuD095823>