Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 19 Jul 2002 20:20:51 -0400 (EDT)
From:      Chris Jackman <cjack@klatsch.org>
To:        freebsd-sparc@freebsd.org
Subject:   Help booting Ultra2 from cdrom 
Message-ID:  <20020719201437.N20908-100000@whiskey.klatsch.org>

next in thread | raw e-mail | index | archive | help


Hola una vez mas!

Since I couldn't get my Ultra2 to netboot, I borrowed an external cdrom
from a friend, and tried the iso.

It boots, but it can't find a root filesytem, and it only likes one cpu.
I'm not sure what i'm supposed to use for the device location for the
cdrom drive, such as ufs:/dev/cd0a.  I don't see it detected in the boot
messages.

When I have two cpu's in the box, it panics just after launching the
second cpu (CPU #1).  Not only does it panic, but it hangs hard.  I'm not
able to use stop-a or any keyboard combination to give me a db prompt or
to get an ok prompt.

I've included both boot messages.  If anyone has pointers, i'm all ears.

Boot messages copied by hand, hence the ... in the copyright messages.

Single CPU:
--------------------------

Rebooting with command: boot /sbus@1f,0/SUNW,fas@e,8800000/sd@3,0:f
Boot device: /sbus@1f,0/SUNW,fas@e8800000/sd@3,0:f   File and args:

>> FreeBSD/sparc64 boot block
   Boot path:   /sbus@1f,0/SUNW,fas@e,8800000/sd@3,0:f
   Boot loader: /boot/loader
Console: OpenFirmware console
disk0 is /sbus@1f,0/SUNW,fas@e,8800000/sd@3
FreeBSD/sparc64 loader
bootpath="/sbus@1f,0/SUNW,fas@e,8800000/sd@3,0:f"
loaddev=disk0s0a:
> \
\: unknown command
|
/boot/kernel/kernel data=0x2f7e08+0xec338 syms=[0x8+0x435c0+0x8+0x3527b]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...

nothing to autoload yet.
jumping to kernel entry at 0xc003800.
Copyrstray vector interrupt: 2033
ight (c) 1992-2002 The FreeBSD Project.
Copyright: (c) 1979, 1980, 1983, 1986, 1988, .....
        The Regents of the University of California
FreeBSD 5.0-CURRENT #0: Mon Jun 24 05:46:27 .....
    jake@u60.locore.ca:/usr/obj/usr/current/sr.....

Preloaded elf kernel "/boot/kernel/kernel" at 0....
Timecounter "tick"  freequency 296013656 Hz
cpu0: Sun Microsystems UltraSparc-II Processor  (296.01 MHZ CPU)
nexus0:  <OpenFirmware Nexus device>
sbus0: clock 25.000 MHz
DVMA map: 0xff800000 to 0xffffffff
initializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
sbus0: <U2S UPA-SBus bridge> on nexus0
sbus0: <SUNW,CS4231>, type (unknown) (no driver attached)
sbus0: <auxio>, type (unknown) (no driver attached)
sbus0: <flashprom>, type (unknown) (no driver attached)
sbus0: <SUNW, fdtwo>, type block (no driver attached)
eeprom0: <SBus EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
eeprom0: model mk48t59
eeprom0: hostid 809a76f4
sbus0: <zs>, type serial (no driver attached)
sbus0: <zs>, type serial (no driver attached)
sbus0: <sc>, type (unknown) (no driver attached)
sbus0: <SUNW,pll>, type (unknown) (no driver attached)
sbus0: <SUNW, fas>, type scsi (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8c0700-0x8c0701f,0x8c06000-0x8c07fff,0x8c04000-0x8c05fff,0x8c02000-0x8c03fff,0x8c00000-0x8c00107 irq 2017 on sbus0
hme0: Ethernet address: 08:00:20:9a:76:f4
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sbus0: <SUNW,bpp>, type (unknown) (no driver attached)
nexus0: <SUNW,ffb>, type display (no driver attached)
Timecounters tick every 10.000 msec

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot>

--------------------------------


Dual CPU:
--------------------------------
cpu0: Sun Microsystems UltraSparc-II Processor  (296.01 MHZ CPU)
cpu1: Sun Microsystems UltraSparc-II Processor  (296.01 MHZ CPU)
FreeBSD/SMP: Multiprocessor System Dectected: 2 CPUs
nexus0:  <OpenFirmware Nexus device>
sbus0: clock 25.000 MHz
DVMA map: 0xff800000 to 0xffffffff
initializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
sbus0: <U2S UPA-SBus bridge> on nexus0
sbus0: <SUNW,CS4231>, type (unknown) (no driver attached)
sbus0: <auxio>, type (unknown) (no driver attached)
sbus0: <flashprom>, type (unknown) (no driver attached)
sbus0: <SUNW, fdtwo>, type block (no driver attached)
eeprom0: <SBus EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
eeprom0: model mk48t59
eeprom0: hostid 809a76f4
sbus0: <zs>, type serial (no driver attached)
sbus0: <zs>, type serial (no driver attached)
sbus0: <sc>, type (unknown) (no driver attached)
sbus0: <SUNW,pll>, type (unknown) (no driver attached)
sbus0: <SUNW, fas>, type scsi (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8c0700-0x8c0701f,0x8c06000-0x8c07fff,0x8c04000-0x8c05fff,0x8c02000-0x8c03fff,0x8c00000-0x8c00107 irq 2017 on sbus0
hme0: Ethernet address: 08:00:20:9a:76:f4
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sbus0: <SUNW,bpp>, type (unknown) (no driver attached)
nexus0: <SUNW,ffb>, type display (no driver attached)
Timecounters tick every 10.000 msec
SMP: AP CPU #1 Launched!
panic: trap: fast data access mmu miss
cpuid = 1; Debugger("panic")


--------------------------------



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020719201437.N20908-100000>