Date: Sat, 13 Mar 2010 15:54:26 -0500 From: Mister Itanium <itanium.user@gmail.com> To: Marcel Moolenaar <xcllnt@mac.com> Cc: freebsd-ia64@freebsd.org Subject: Re: Installation Problem - 8.0 Message-ID: <230f61611003131254hea7f714v8663873f3a66bc39@mail.gmail.com> In-Reply-To: <230f61611003120412m1cd9704aia0e482f55aca3a77@mail.gmail.com> References: <230f61611003081111j7f457353g7c28b6cf37a7672@mail.gmail.com> <410865A6-1DCD-4269-91CC-ADE64A3C6E91@mac.com> <230f61611003101913r254d668k152ed5e51ecc9100@mail.gmail.com> <61D1F630-3DA2-47FB-B99F-8B9D7DE87D13@mac.com> <230f61611003110319r68564794k725192b16ae32a8e@mail.gmail.com> <230f61611003111259ja9e91e0mdfd8550df41d64f8@mail.gmail.com> <22F39E8E-C13D-43E7-8AF8-9DAFC14CD6CC@mac.com> <230f61611003111653o3cc8630bj93e0ce53077e9a2c@mail.gmail.com> <230f61611003120412m1cd9704aia0e482f55aca3a77@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm hitting another DEAD wall. I finally got to the installation screen, it detects the HD, but "FreeBSD DiskLabel Editor" is not able to WRITE/CHANGE anything on the HDD. This is what I get when I try to WRITE something on the disk: =============================================== *ad0: TIMEOUT - WRITE_DMA retrying (0 retries left) LBA=0 GEOM: ad0: corrupt or invalid GPT detected. GEOM: ad0: GPT rejected -- may not be recoverable.* =============================================== And then I get a message saying it can't wirte on ad0 disk etc.. Question number 1: *Any suggestions/help on resolving this?* Question n.2: *How do I disable ACPI on boot on IA64 machines? * Thanks a lot! PS: HDD works fine under Debian Linux, using fdisk I'm able to change/delete/add partitions without a problem, which makes me think it's not a hardware issue. On Fri, Mar 12, 2010 at 7:12 AM, Mister Itanium <itanium.user@gmail.com>wrote: > Problem *SOLVED.* > HDD was set to "Primary *Slave*", after changing it to *Primary Master* it > detected my HD, and I'm now able to proceed with the installation. > I've seen a LOT of topics online asking the same question, and I'm wonder > if this solution could apply to them all. > > Thanks, > Mr. Itanium > > > On Thu, Mar 11, 2010 at 7:53 PM, Mister Itanium <itanium.user@gmail.com>wrote: > >> I'm not sure if I should start another email chain or not, but now I'm >> having problems at the Installation... >> >> It pretty much says *"no disks found! Please verify that your disk >> controller is being properly probed at boot time. See the hardware guide on >> the Documentation menu for clues on diagnosing this type of problem."* >> >> This is the "boot -v" until the installation point: >> >> My motherboard is a SuperMicro i2dml-ig2 ( >> http://www.supermicro.com/products/motherboard/Itanium/E8870/i2DML-iG2.cfm) >> I've searched online, and changed all the settings possible @ Bios, but >> I'm still getting the same problem. >> Please Advise, >> Thanks! >> >> >> >>> >>> >>> >> -^H\^HEntering /boot/kernel/kernel at 0xe000000004080000... >> >> PAL Proc at 0xe00000007ff08010 >> SAL Proc at 0xe00000007ff48020, GP at 0xe0000000801712c0 >> SAL: AP wake-up vector: 0xf0 >> Platform clock frequency 199475857 Hz >> Processor ratio 14/2, Bus ratio 1/1, ITC ratio 14/2 >> ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0 >> Processor supports 24 Region ID bits >> Trying VHPT size 0x1000000 >> Putting VHPT at 0x6000000 >> Splitting [0x560c000-0x7fb40000] >> Copyright (c) 1992-2009 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 8.0-RELEASE #0: Sun Nov 22 01:11:28 UTC 2009 >> root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC >> UNWIND: table added: base=e000000004000000, start=e000000004bbb060, >> end=e000000004bfc250 >> Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000005608580. >> Preloaded mfs_root "/boot/mfsroot" at 0xe000000005608660. >> CPU: Madison (1396.33-Mhz Itanium 2) >> Origin = "GenuineIntel" Revision = 5 >> Features = 0x1<LB> >> real memory = 4282097664 (4083 MB) >> >> Physical memory chunk(s): >> 0x01900000 - 0x03ffffff, 40894464 bytes (4992 pages) >> 0x0560c000 - 0x05ffffff, 10436608 bytes (1274 pages) >> 0x0a000000 - 0x7fb3ffff, 1974730752 bytes (241056 pages) >> 0x7ff7c000 - 0x7ff81fff, 24576 bytes (3 pages) >> >> 0x180000000 - 0x1fb455fff, 2068144128 bytes (252459 pages) >> 0x1feffe000 - 0x1ff453fff, 4546560 bytes (555 pages) >> 0x1ff802000 - 0x1ff8fdfff, 1032192 bytes (126 pages) >> 0x1ff900000 - 0x1ff905fff, 24576 bytes (3 pages) >> >> 0x1ff9fe000 - 0x1ffd63fff, 3563520 bytes (435 pages) >> 0x1ffdfe000 - 0x1ffe0ffff, 73728 bytes (9 pages) >> 0x1ffe7e000 - 0x1fffb7fff, 1286144 bytes (157 pages) >> avail memory = 4084006912 (3894 MB) >> >> FPSWA Revision = 0x10012, Entry = 0xe0000001ffe60050 >> Table 'FACP' at 0xe00000007ff99138 >> Table 'APIC' at 0xe00000007ff99230 >> Local APIC address=0xfee00000 >> Local SAPIC entry >> ProcessorId=0x0, Id=0xc0, Eid=0x18 >> Local SAPIC entry >> ProcessorId=0x1, Id=0xc6, Eid=0x18 >> I/O SAPIC entry >> Id=0x0, InterruptBase=0x0, Address=0xfec00000 >> I/O SAPIC entry >> Id=0x2, InterruptBase=0x18, Address=0xfaffe000 >> I/O SAPIC entry >> Id=0x1, InterruptBase=0x30, Address=0xfafff000 >> Interrupt source override entry >> Bus=0, Source=9, Irq=0x9 >> Platform interrupt entry >> Polarity=3, TriggerMode=3, Id=0xc6, Eid=0x18, Vector=0x1e, >> Irq=22 >> Table 'IPPT' at 0xe00000007ff99308 >> Table 'SPCR' at 0xe00000007ff99340 >> MCA: allocated 16384 bytes for state info. >> SMP: waking up cpu1 >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> cpu0: ACPI Id=1, SAPIC Id=c6, SAPIC Eid=18 (BSP) >> cpu1: ACPI Id=0, SAPIC Id=c0, SAPIC Eid=18 >> ULE: setup cpu 0 >> ULE: setup cpu 1 >> mem: <memory> >> null: <null device, zero device> >> nfslock: pseudo-device >> random: <entropy source, Software, Yarrow> >> ACPI: RSDP 0x7ff99000 00024 (v2 AMI ) >> ACPI: XSDT 0x7ff99090 00044 (v1 AMI TIGER_2W 01072002 MSFT 00010013) >> ACPI: FACP 0x7ff99138 000F4 (v3 AMI TIGER_2W 01072002 MSFT 00010013) >> ACPI: DSDT 0x7ff9b000 0220E (v1 AMI TIGER2W 00000000 MSFT 0100000D) >> ACPI: FACS 0x7ff992c0 00040 >> ACPI: APIC 0x7ff99230 0008E (v1 AMI TIGER_2W 01072002 MSFT 00010013) >> ACPI: IPPT 0x7ff99308 00034 (v1 AMI TIGER_2W 01072002 MSFT 00010013) >> ACPI: SPCR 0x7ff99340 00050 (v1 AMI TIGER_2W 01072002 MSFT 00010013) >> nexus0: registered as a time-of-day clock (resolution 1000us) >> acpi0: <AMI TIGER_2W> on motherboard >> acpi0: [MPSAFE] >> acpi0: [ITHREAD] >> acpi0: Power Button (fixed) >> AcpiOsDerivePciId: \_SB_.CSFF.IOH5.IOHC -> bus 255 dev 28 func 5 >> AcpiOsDerivePciId: \_SB_.CSFF.IOH1.IO01 -> bus 255 dev 28 func 1 >> AcpiOsDerivePciId: \_SB_.CSFF.IOH2.IO02 -> bus 255 dev 28 func 2 >> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 >> pcib0: <ACPI Host-PCI bridge> on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pci0: domain=0, physical bus=0 >> found-> vendor=0x8086, dev=0x244e, revid=0x82 >> domain=0, bus=0, slot=30, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x8086, dev=0x24c0, revid=0x02 >> domain=0, bus=0, slot=31, func=0 >> class=06-01-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x8086, dev=0x24cb, revid=0x02 >> domain=0, bus=0, slot=31, func=1 >> class=01-01-8a, hdrtype=0x00, mfdev=0 >> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=0 >> map[20]: type I/O Port, range 32, base 0x1000, size 4, enabled >> map[24]: type Memory, range 32, base 0, size 10, memory disabled >> pcib0: no PRT entry for 0.31.INTA >> found-> vendor=0x8086, dev=0x24c3, revid=0x02 >> domain=0, bus=0, slot=31, func=3 >> class=0c-05-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=0 >> map[20]: type I/O Port, range 32, base 0xcc0, size 5, enabled >> pcib0: no PRT entry for 0.31.INTB >> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pcib1: domain 0 >> pcib1: secondary bus 1 >> pcib1: subordinate bus 1 >> pcib1: I/O decode 0xd000-0xdfff >> pcib1: memory decode 0xfb000000-0xfd0fffff >> pcib1: no prefetched decode >> pcib1: Subtractively decoded bridge. >> pci1: <ACPI PCI bus> on pcib1 >> pci1: domain=0, physical bus=1 >> found-> vendor=0x1002, dev=0x4752, revid=0x27 >> domain=0, bus=1, slot=2, func=0 >> class=03-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0087, statreg=0x0290, cachelnsz=32 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled >> pcib1: requested memory range 0xfc000000-0xfcffffff: good >> map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled >> pcib1: requested I/O range 0xd800-0xd8ff: in range >> map[18]: type Memory, range 32, base 0xfd0ff000, size 12, enabled >> pcib1: requested memory range 0xfd0ff000-0xfd0fffff: good >> pcib1: matched entry for 1.2.INTA >> pcib1: slot 2 INTA hardwired to IRQ 18 >> vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem >> 0xfc000000-0xfcffffff,0xfd0ff000-0xfd0fffff irq 18 at device 2.0 on pci1 >> pci0: <bridge, PCI-ISA> at device 31.0 (no driver attached) >> atapci0: <Intel ICH4 UDMA100 controller> port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f irq 0 at device 31.1 on >> pci0 >> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000 >> ata0: <ATA channel 0> on atapci0 >> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 >> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 >> ata0: reset tp1 mask=03 ostat0=00 ostat1=50 >> ata0: stat0=0x01 err=0x01 lsb=0x01 msb=0x01 >> ata0: stat1=0x01 err=0x01 lsb=0x01 msb=0x01 >> ata0: reset tp2 stat0=01 stat1=01 devices=0x0 >> ata0: [MPSAFE] >> ata0: [ITHREAD] >> ata1: <ATA channel 1> on atapci0 >> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 >> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 >> ata1: reset tp1 mask=03 ostat0=50 ostat1=01 >> ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 >> ata1: reset tp2 stat0=00 stat1=01 devices=0x10000 >> ata1: [MPSAFE] >> ata1: [ITHREAD] >> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >> pcib2: <ACPI Host-PCI bridge> on acpi0 >> pcib2: could not get PCI interrupt routing table for \_SB_.PCI1 - >> AE_NOT_FOUND >> pci2: <ACPI PCI bus> on pcib2 >> pci2: domain=0, physical bus=2 >> found-> vendor=0x8086, dev=0x1461, revid=0x04 >> domain=0, bus=2, slot=28, func=0 >> class=08-00-20, hdrtype=0x00, mfdev=0 >> cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords) >> >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> map[10]: type Memory, range 32, base 0xfafff000, size 12, enabled >> found-> vendor=0x8086, dev=0x1460, revid=0x04 >> domain=0, bus=2, slot=29, func=0 >> >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x8086, dev=0x1461, revid=0x04 >> domain=0, bus=2, slot=30, func=0 >> class=08-00-20, hdrtype=0x00, mfdev=0 >> cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords) >> >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> map[10]: type Memory, range 32, base 0xfaffe000, size 12, enabled >> found-> vendor=0x8086, dev=0x1460, revid=0x04 >> domain=0, bus=2, slot=31, func=0 >> >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> pci2: <base peripheral, interrupt controller> at device 28.0 (no driver >> attached) >> pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2 >> pcib3: domain 0 >> pcib3: secondary bus 3 >> pcib3: subordinate bus 3 >> pcib3: I/O decode 0xf000-0xffff >> pcib3: memory decode 0xfa000000-0xfa0fffff >> pcib3: no prefetched decode >> pci3: <ACPI PCI bus> on pcib3 >> pci3: domain=0, physical bus=3 >> found-> vendor=0x8086, dev=0x1010, revid=0x01 >> domain=0, bus=3, slot=2, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0117, statreg=0x0230, cachelnsz=32 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 >> ns) >> intpin=a, irq=3 >> >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type Memory, range 64, base 0xfa0c0000, size 17, enabled >> pcib3: requested memory range 0xfa0c0000-0xfa0dffff: good >> map[20]: type I/O Port, range 32, base 0xfe80, size 6, enabled >> pcib3: requested I/O range 0xfe80-0xfebf: in range >> pcib3: matched entry for 3.2.INTA >> pcib3: slot 2 INTA hardwired to IRQ 48 >> found-> vendor=0x8086, dev=0x1010, revid=0x01 >> domain=0, bus=3, slot=2, func=1 >> class=02-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0117, statreg=0x0230, cachelnsz=32 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 >> ns) >> intpin=b, irq=3 >> >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type Memory, range 64, base 0xfa0e0000, size 17, enabled >> pcib3: requested memory range 0xfa0e0000-0xfa0fffff: good >> map[20]: type I/O Port, range 32, base 0xff00, size 6, enabled >> pcib3: requested I/O range 0xff00-0xff3f: in range >> pcib3: matched entry for 3.2.INTB >> pcib3: slot 2 INTB hardwired to IRQ 49 >> em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xfe80-0xfebf mem >> 0xfa0c0000-0xfa0dffff irq 48 at device 2.0 on pci3 >> em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfa0c0000 >> em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xfe80 >> em0: [FILTER] >> em0: bpf attached >> em0: Ethernet address: 00:30:48:20:f6:2a >> em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xff00-0xff3f mem >> 0xfa0e0000-0xfa0fffff irq 49 at device 2.1 on pci3 >> em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfa0e0000 >> em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xff00 >> em1: [FILTER] >> em1: bpf attached >> em1: Ethernet address: 00:30:48:20:f6:2b >> pci2: <base peripheral, interrupt controller> at device 30.0 (no driver >> attached) >> pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2 >> pcib4: domain 0 >> pcib4: secondary bus 4 >> pcib4: subordinate bus 4 >> pcib4: I/O decode 0xf000-0xfff >> pcib4: no prefetched decode >> pci4: <ACPI PCI bus> on pcib4 >> pci4: domain=0, physical bus=4 >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0 >> uart0: [FILTER] >> uart0: fast interrupt >> uart0: console (115200,n,8,1) >> cpu0: <ACPI CPU> on acpi0 >> cpu0: switching to generic Cx mode >> cpu1: <ACPI CPU> on acpi0 >> Reducing kern.maxvnodes 131431 -> 100000 >> procfs registered >> Timecounters tick every 1.000 msec >> lo0: bpf attached >> ata0: Identifying devices: 00000000 >> ata0: New devices: 00000000 >> ata1: Identifying devices: 00010000 >> ata1: New devices: 00010000 >> md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004e08580 >> ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire >> acd0: setting PIO4 on ICH4 chip >> acd0: setting UDMA33 on ICH4 chip >> acd0: <CD-224E/1.9A> CDROM drive at ata1 as master >> acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33 >> acd0: Reads: CDR, CDRW, CDDA stream, packet >> acd0: Writes: >> acd0: Audio: play, 256 volume levels >> acd0: Mechanism: ejectable tray, unlocked >> acd0: Medium: CD-ROM 120mm data disc >> ATA PseudoRAID loaded >> acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 >> acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 >> Trying to mount root from ufs:/dev/md0 >> ct_to_ts([2010-03-12 00:24:18]) = 1268353458.000000000 >> start_init: trying /sbin/init >> start_init: trying /sbin/oinit >> start_init: trying /sbin/init.bak >> start_init: trying /rescue/init >> start_init: trying /stand/sysinstall >> /stand/sysinstall running as init on serial console >> >> These are the predefined terminal types available to >> sysinstall when running stand-alone. Please choose the >> closest match for your particular terminal. >> >> 1 ...................... Standard ANSI terminal. >> 2 ...................... VT100 or compatible terminal. >> 3 ...................... FreeBSD system console (color). >> 4 ...................... FreeBSD system console (monochrome). >> >> 5 ...................... xterm terminal emulator. >> >> Your choice: (1-5) >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?230f61611003131254hea7f714v8663873f3a66bc39>