Date: Fri, 23 May 2003 03:45:27 -0400 From: "Dheeraj" <dhee@myrealbox.com> To: freebsd-current@freebsd.org Subject: Problems with 3com 3CCFEM556B combo card 5.1-beta2 Message-ID: <1053675927.b6b82ee0dhee@myrealbox.com>
next in thread | raw e-mail | index | archive | help
Hello all. this card works fine for me with 4-stable but for some reason doesn't whe= n booting with -current.(5.1-beta2) the relevant portion of the boot msg is =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D pccard1: using CIS quirks for 3com, MegaHertz 3CCFEM556B, A, 001 pccard1: CIS version PCCARD 2.0 or 2.1 pccard1: CIS info: 3com, Megahertz 3CCFEM556B, A, 001 pccard1: Manufacturer code 0x101, product 0x556 pccard1: function 0:network adaptor, ccr addr 1000 mask 267 pccard1: function 0, config table entry 7: I/O card; irq mask ffff; iomask = 5, iospace 0-1f; io8 io16 irqlevel pccard1: function 1:serial port, ccr addr 1100 mask 277 pccard1: function 1, config table entry 39: I/O card; irq mask ffff; iomask= 3, iospace 0-7; io8 irqlevel ep0: <3Com Megahertz 3CCFEM556B> at port 0x100-0x11f irq11 function 0 confi= g 7 on pccard1 ep0: eeprom failed to come ready. device_probe_attach: ep0 attach returned 6 sio4: <3Com Megahertz 3CCFEM556B> at port 0x120-0x127 irq 11 function 1 con= fig 39 on pccard1 sio4: type 16550A with a bogus IIR_TXRDY register sio4: unable to activate interrupt in fast mode - using normal mode ***... followed by ad0 detection.. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D apologies for not getting the whole boot log since it seems something is wr= ong with the serial port too. in case it helps the boot messages on 4-stable are. pcic1: Autodetected 5.0V card pccard: card inserted, slot 1 pcic1: reset 1 int is 10 stat is 5d pcic1: reset 2 pcic1:Event mask 0x9 int is 70 stat is 5d pcic1: reset 3 int is 70 stat is 7f pccard1: Assigning ep0: io 0x240-0x25f irq 11 flags 0x1 pcic: I/O win 0 flags 17 240-25f ep0: Forcing IRQ to 11 ep0: Pass 1 of 2 detection failed (nonfatal) pcic: I/O win 0 flags 17 240-25f ep0: Forcing IRQ to 11 ep0: Ethernet address 00:00:86:3b:63:49 bpf: ep0 attached. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D there are obviosly port address differences.. IRQ seems to be same.. i shall appreciate all your help. truely dheeraj
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1053675927.b6b82ee0dhee>