Date: Fri, 25 Oct 2002 18:02:24 -0400 From: Michael E Mercer <mmercer@nc.rr.com> To: freebsd-java@freebsd.org Subject: alrighty then... java and java_g dying quite regularly... Message-ID: <3DB9BF70.E257B15F@nc.rr.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------74828789990473ABA24F9AF2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello all,
I am using LimeWire and before I was able to use it with java_g.
However now that I rebuilt "world" that contained the libc_r changes and rebuilt
jdk13.
It continously crashes whether I use java or java_g to start it.
What would you like (if any) for me to gather so that someone with the know-how
can look into it?
I have plenty of time to help out in whatever way I can.
I can if needed attached the full output of the crash but it is pages long...
Thanks
Michael Mercer
> java -version
java version "1.3.1-p7"
Java(TM) 2 Runtime Environment, Standard Edition (build
1.3.1-p7-mmercer-021023-16:14)
Classic VM (build 1.3.1-p7-mmercer-021023-16:14, green threads, nojit)
> java_g -version
java version "1.3.1-p7"
Java(TM) 2 Runtime Environment, Standard Edition (build
1.3.1-p7-mmercer-021023-16:14)
Classic VM (build 1.3.1-p7-mmercer-021023-16:14, green threads, nojit)
Error from LimeWire crash...
SIGBUS 10* bus error
Full thread dump Classic VM (1.3.1-p7-mmercer-021023-16:14, green threads):
"Thread-619" (TID:0x28d78bc0, sys_thread_t:0x8bdc080, state:R) prio=5
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:100)
at
com.limegroup.gnutella.util.SocketOpener$SocketOpenerThread.run(Unknown Source)
"Thread-618" (TID:0x28d78d88, sys_thread_t:0x8c2ac80, state:R) prio=5
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:100)
--------------74828789990473ABA24F9AF2
Content-Type: text/plain; charset=us-ascii;
name="dmesg.output"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.output"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Mon Oct 21 22:34:19 EDT 2002
mmercer@dual.mmercer.com:/usr/obj/usr/src/sys/dualII_4_7
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536870912 (524288K bytes)
avail memory = 517980160 (505840K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03d9000.
ccd0-3: Concatenated disk drivers
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0355d37 (1000117)
VESA: 3dfx Interactive, Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 16 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 2
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8300) at 16.0 irq 9
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem 0xfeafff80-0xfeafffff irq 10 at device 17.0 on pci0
xl0: Ethernet address: 00:50:04:11:29:cd
xl0: selecting 10baseT transceiver, half duplex
isa0: too many dependant configs (8)
isa0: unexpected small tag 14
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pca0 at port 0x40 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.16> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
ad0: 9768MB <ST310240A> [19846/16/63] at ata0-master UDMA33
ad1: 76319MB <ST380021A> [155061/16/63] at ata0-slave UDMA33
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad2: 76319MB <ST380021A> [155061/16/63] at ata1-master UDMA33
acd0: DVD-ROM <HITACHI DVD-ROM GD-2500> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s1a
pid 5515 (java), uid 1001: exited on signal 6 (core dumped)
pid 5528 (java), uid 1001: exited on signal 6 (core dumped)
pid 5542 (java), uid 1001: exited on signal 6 (core dumped)
pid 91768 (java), uid 1001: exited on signal 6 (core dumped)
pid 95862 (java), uid 1001: exited on signal 6 (core dumped)
--------------74828789990473ABA24F9AF2--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-java" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DB9BF70.E257B15F>