Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 7 Dec 2003 13:35:36 -0800 (PST)
From:      Doug White <dwhite@gumbysoft.com>
To:        Nick Sayer <nsayer@kfu.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: 5.1-RELEASE-p11 - ACPI panic during shutdown, USB panic w/ USB2 HD
Message-ID:  <20031207133321.R7085@carver.gumbysoft.com>
In-Reply-To: <F5BA4BBB-28EE-11D8-8979-000A9575D7CC@kfu.com>
References:  <F5BA4BBB-28EE-11D8-8979-000A9575D7CC@kfu.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 7 Dec 2003, Nick Sayer wrote:

> I don't have huge amounts of detail. I'm sort of writing this to see if
> I can get a rough idea how likely it is these items are already fixed
> in the pending 5.2 release.

Without panic messages, its really hard to say. Why don't you pull down
5.2-BETA and see if you can reproduce the issues?

There was an acpi shutdown panic in 5.2 a couple of times, but it seems to
be happy now.

Can't help you on the ehci/umass issue though.  I have a USB disk that
will at least read ok, but since its HFS+ I can't mount it. Its also my
backup disk for my Macs so I'd prefer not to destroy it :-)

> I have an Asus P5A based machine that I recently upgraded to
> RELENG_5_1. When I was done, I found that when it was shutting down,
> just at (what I perceive to be, anyway) the last step before it would
> reboot, it would go into what appeared to be a trap loop of some sort.
> It would quickly scroll 'trap 12' frames and then hang. The only
> recovery is to press the reset button.
>
> This isn't really a big pain, but it does mean that I can't remotely
> reboot this machine at all.
>
> It must be at least happening after the filesystems are dismounted,
> because they always come back up clean.
>
> I note that this machine has to have kern.timecounter.hardware="TSC" in
> sysctl.conf to keep the clock from running at double speed. Is this
> something fixed in 5.2 or is this something unfixable except in
> hard/firmware?
>
> ---
>
> Case #2:
>
> This is an older machine with a USB 2.0 PCI controller card and an
> external USB 2.0 disk enclosure. Excerpts from dmesg.boot:
>
> ohci0: <NEC uPD 9210 USB controller> mem 0xe7000000-0xe7000fff irq 5 at
> device 9
> .0 on pci0
> usb0: OHCI version 1.0
> usb0: <NEC uPD 9210 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <NEC uPD 9210 USB controller> mem 0xe6800000-0xe6800fff irq 11
> at device
> 9.1 on pci0
> usb1: OHCI version 1.0
> usb1: <NEC uPD 9210 USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe6000000-0xe60000ff
> irq 10 at d
> evice 9.2 on pci0
> ehci_pci_attach: companion usb0
> ehci_pci_attach: companion usb1
> usb2: EHCI version 0.95
> usb2: companion controllers, 3 ports each: usb0 usb1
> usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 5 ports with 5 removable, self powered
>
> Shortly after disk I/O begins on the USB disk, there is a fatal trap
> panic and reboot. This disk/controller pair worked just fine under
> 4.8-RELEASE, albeit not at high speed.
>
> ---
>
> Should I not worry about these and just wait for 5.2?
>
> Thanks in advance.
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite@gumbysoft.com          |  www.FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031207133321.R7085>