From owner-freebsd-fs@FreeBSD.ORG Wed Nov 27 14:14:24 2013 Return-Path: Delivered-To: freebsd-fs@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D2B7214F for ; Wed, 27 Nov 2013 14:14:24 +0000 (UTC) Received: from pi.nmdps.net (pi.nmdps.net [IPv6:2a01:be00:10:201:0:80:0:1]) by mx1.freebsd.org (Postfix) with ESMTP id 995C222CE for ; Wed, 27 Nov 2013 14:14:24 +0000 (UTC) Received: from pi.nmdps.net (localhost [127.0.0.1]) (Authenticated sender: krichy@cflinux.hu) by pi.nmdps.net (Postfix) with ESMTPSA id 92ACE10E6 for ; Wed, 27 Nov 2013 15:14:16 +0100 (CET) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Date: Wed, 27 Nov 2013 15:14:14 +0100 From: krichy@cflinux.hu To: freebsd-fs@freebsd.org Subject: Fwd: Re: ssd for zfs Message-ID: <074193da2481bdd3ee18cb5de09bd28d@cflinux.hu> X-Sender: krichy@cflinux.hu User-Agent: Roundcube Webmail/0.9.5 X-BeenThere: freebsd-fs@freebsd.org X-Mailman-Version: 2.1.16 Precedence: list List-Id: Filesystems List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 27 Nov 2013 14:14:24 -0000 -------- Eredeti üzenet -------- Tárgy: Re: ssd for zfs Dátum: 2013-11-27 14:07 Feladó: Richard Kojedzinszky Címzett: Tom Evans Másolat: FreeBSD FS Dear FS devs, After some investigation, it turned out that when I turn write-cache off under linux, the performance drops to 100 on that OS also. But when enabled, 1400 IOPS (synchronous) can be achieved. So I would like to see the same on FreeBSD as well. Using camcontrol shows that the write cache is enabled, but I may assume that something around this is causing the performance degradation. But unfortunately I cannot step forward right now. Regards, Kojedzinszky Richard On Wed, 27 Nov 2013, Tom Evans wrote: > On Wed, Nov 27, 2013 at 8:51 AM, Richard Kojedzinszky > wrote: >> Dear fs developers, >> >> Probably this is not the best list to report my issue, but please >> forward it >> to where it should get. >> >> I bought an SSD for my ZFS filesystem to use it as a ZIL. I've tested >> it >> under linux, and found that it can handle around 1400 random >> synchronized >> write IOPS. Then I placed it into my freebsd 9.2 box, and after >> attaching it >> as a ZIL, my zpool only performs 100 (!) write iops. I've attached it >> to an >> AHCI controller and to an LSI 1068 controller, on both it behaves the >> same. >> So I expect that something in the scsi layer is different, FreeBSD is >> handling this device slower, but actually it can handle the 1400 iops >> as >> tested under linux. >> >> Please give some advice where to go, how to debug, and how to improve >> FreeBSD's performance with this drive. >> > > The ZIL is only used for synchronous writes. The majority of writes > are asynchronous, and the ZIL is not used at all. Plus, a ZIL can only > increase iops by bundling writes - if your underlying pool is write > saturated already, then a ZIL can't help - any data written to the ZIL > has to end up on the pool. > > Test the SSD by itself under FreeBSD to rule out FreeBSD not working > correctly on the SSD (I doubt this though). > > Cheers > > Tom >