Date: Thu, 13 Nov 2003 22:34:18 +0600 From: Pavel Gubin <pg@ie.tusur.ru> To: freebsd-gnats-submit@freebsd.org, eugen@kuzbass.ru Cc: stable@freebsd.org Subject: Re: kern/57174: 4.9-PRERELEASE panic: ata_dmasetup: transfer active on this device! Message-ID: <20031113163418.GA58071@ie.tusur.ru>
next in thread | raw e-mail | index | archive | help
Hello,
A couple days ago I faced with a problem similar to described in PR
kern/57174 (see subject).
But there are some differences:
1) hw.ata.tags=0 on my system
2) problem appeared when i replaced a Seagate Barracuda 30G with Maxtor
DiamondMax Plus 9 200G, attached to CMD648-based PCI adapter.
3) system is 4.9-RELEASE
Note that:
1) Maxtor is the only drive attached to CMD
2) When I tried to attach Maxtor to the free channel of Promise U66
controller, the kernel just panics at ATA-probe (very similar to PR
kern/57369)
3) BIOS on CMD648 is obsolete (sees only 64G of 200), but removing BIOS chip
does not change things - and I know that this controller works fine without
BIOS under FreeBSD 4.8 with 2*Maxtors 80G.
Workaround is to disable UDMA on this drive (atacontrol mode 4 pio4 pio4),
but this significantly slows down system, and another errors continue to
appear (ad8: READ command timeout...)
Below is a /var/run/dmesg.boot for this system. I can also make a backtrace
of chashdump if needed.
====
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #6: Tue Nov 11 11:07:07 TSK 2003
pg@rainbow.ie.tusur.ru:/usr/obj/usr/src/sys/Shadow
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 757459741 Hz
CPU: AMD Athlon(tm) Processor (757.46-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x622 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257961984 (251916K bytes)
Preloaded elf kernel "kernel" at 0xc02d2000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00f7950
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-751 PCI-PCI (1x/2x AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 5.0 irq 11
isab0: <PCI to ISA bridge (vendor=1022 device=7408)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 756 ATA66 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <PCI to Other bridge (vendor=1022 device=740b)> at device 7.3 on pci0
fxp0: <Intel 82557 Pro/100 Ethernet> port 0xc800-0xc81f mem 0xefc00000-0xefcfffff,0xef4fe000-0xef4fefff irq 10 at device 8.0 on pci0
fxp0: Ethernet address 00:a0:c9:42:cc:c2
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: <Macronix 98713 10/100BaseTX> port 0xca00-0xcaff mem 0xeff4ff00-0xeff4ffff irq 11 at device 9.0 on pci0
dc0: Ethernet address: 08:00:a0:10:01:b6
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise ATA66 controller> port 0xcc00-0xcc3f,0xce00-0xce03,0xd000-0xd007,0xd200-0xd203,0xd400-0xd407 mem 0xeff60000-0xeff7ffff irq 12 at device 11.0 on pci0
ata2: at 0xd400 on atapci1
ata3: at 0xd000 on atapci1
atapci2: <CMD 648 ATA66 controller> port 0xd600-0xd60f,0xd800-0xd803,0xda00-0xda07,0xdc00-0xdc03,0xde00-0xde07 irq 10 at device 12.0 on pci0
ata4: at 0xde00 on atapci2
ata5: at 0xda00 on atapci2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
ad0: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata0-master UDMA66
ad1: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata0-slave UDMA66
ad2: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata1-master UDMA66
ad3: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata1-slave UDMA66
ad4: 76319MB <ST380021A> [155061/16/63] at ata2-master UDMA66
ad5: 76319MB <ST380021A> [155061/16/63] at ata2-slave UDMA66
ad8: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata4-master UDMA66
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
===
--
Pavel Gubin
TUSC&R / Industrial Electronics dept / System Administrator
2:5005/14@fidonet / Phone +7-3822-423067 / ICQ 28835566
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031113163418.GA58071>