Date: Fri, 18 Jan 2013 13:54:42 +0100 From: Dani <dppascual@gmail.com> To: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: Re: driver mps - SCSI sense: ILLEGAL REQUEST (Logical block address out of range) Message-ID: <CAAOK-NASEEcih=bC=oUhNY-0ZJ8L3gi9ceAmHbp_YnHXf3NV2w@mail.gmail.com> In-Reply-To: <B2FD678A64EAAD45B089B123FDFC3ED75E68FD5F68@inbmail01.lsi.com> References: <CAAOK-NCeRZ28_-5FxTcWKtj=vWYrEhTpgKacrFbpMv6hNvuM0Q@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED75E68FD5F68@inbmail01.lsi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Thanks for your interest, but I already have solved the problem. Regards 2013/1/18 Desai, Kashyap <Kashyap.Desai@lsi.com> > Dani: > > Can you share complete "Driver logs" ( I mean /var/log/messages") > > Also explain reproduction method. I will try to understand from logs what > is going wrong. > > My very first observation is your "/dev/da24" is Xprot and it is just 20MB > drive. So your application may be trying to write beyond max LBA of > /dev/da24. > You should exclude /dev/da24 from your test. > > ` Kashyap > > > -----Original Message----- > > From: owner-freebsd-scsi@freebsd.org [mailto:owner-freebsd- > > scsi@freebsd.org] On Behalf Of Dani > > Sent: Monday, January 14, 2013 6:07 PM > > To: freebsd-scsi@freebsd.org > > Subject: driver mps - SCSI sense: ILLEGAL REQUEST (Logical block address > > out of range) > > > > Hi all, > > > > I have installed FreeBSD 9.1 on Dell PowerEdge r720. This server is > > connected to the storage array Dell PowerVault MD3200 using SAS cables. > > I have created a ZFS pool with the SAS disks (Dell PowerVault MD3200) > > and can perform read/write operations in the pool without problems. > > However, when I export the pool and then import it, the following errors > > are showed: > > > > (da24:mps0:0:3:31): Field Replaceable Unit: 5 > > (da24:mps0:0:3:31): Error 22, Unretryable error > > (da24:mps0:0:3:31): READ(10). CDB: 28 0 0 0 0 0 0 1 0 0 > > (da24:mps0:0:3:31): CAM status: SCSI Status Error > > (da24:mps0:0:3:19): SCSI status: Check Condition > > (da24:mps0:0:3:31): SCSI sense: ILLEGLA REQUEST asc:21,0 (Logical block > > address out of range) > > > > > > The device da24 is an access device to the storage array: > > > > da24 at mps0 bus 0 scbus0 target 3 lun 31 > > da24: <DELL Universal Xport 0780> Fixed Direct Access SCSI-5 device > > da24: 600.000MB/s transfers > > da24: Command Queueing enabled > > da24: 20MB (40960 512 byte sectors: 64H 32S/T 20C) > > > > #zpool status > > pool: pool0 > > state: ONLINE > > scan: none requested > > config: > > > > NAME STATE READ > > WRITE > > CKSUM > > pool0 ONLINE 0 > > 0 0 > > mirror-0 ONLINE 0 > > 0 0 > > da0 ONLINE 0 > > 0 0 > > da1 ONLINE 0 > > 0 0 > > spares > > da2 AVAIL > > > > errores: No known data errorsless > > > > # diskinfo -v da0 > > da0 > > 512 #sectorsize > > 999665448960 # mediasize in bytes (931G) > > 1952471580 # mediasize in sectors > > 0 # stripesize > > 0 # stripeoffset > > 121535 # Cylinders according to firmware. > > 255 # Heads according to firmware. > > 63 # Sectors according to firmware > > 2AH000O # Disk ident. > > > > > > > > Why are those errors produced? Are they relevant? Can they be omitted? > > > > Thanks. Regards. > > _______________________________________________ > > freebsd-scsi@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAOK-NASEEcih=bC=oUhNY-0ZJ8L3gi9ceAmHbp_YnHXf3NV2w>