Date: Thu, 29 Jan 2015 10:12:13 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 197168] bce driver failing on 10.1p5, no reason... Message-ID: <bug-197168-8@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=197168 Bug ID: 197168 Summary: bce driver failing on 10.1p5, no reason... Product: Base System Version: 10.1-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: llevier@argosnet.com Hi Guys, My server runs prod on 10.1p3, kernel is specific, defined into a file I use each time (no update). Recently I updated the OS, make buildworkd, kernel, installworld etc I was: FreeBSD Cquad 10.1-RELEASE-p3 FreeBSD 10.1-RELEASE-p3 #0: Fri Jan 2 01:10:12 CET 2015 root@:/usr/obj/usr/src/sys/Cquad amd64 and moved to: Jan 29 10:02:57 Cquad kernel: FreeBSD 10.1-RELEASE-p5 #0: Thu Jan 29 09:43:35 CET 201 5 For unknown reason, the bce driver fails on p5. ifconfig is fine but no packet passing... Nothing visible, nothing weird, just no packet passing by. Some inputs from new kernel: Jan 29 10:02:57 Cquad kernel: bce0: <QLogic NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xdc000000-0xddffffff irq 17 at device 0.0 on pci4 Jan 29 10:02:57 Cquad kernel: bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled but not running! Jan 29 10:02:57 Cquad kernel: brgphy0: <BCM5708S 1000/2500baseSX PHY> PHY 2 on miibus0 Jan 29 10:02:57 Cquad kernel: brgphy0: 1000baseSX-FDX, auto-neg workaround, auto Jan 29 10:02:57 Cquad kernel: bce0: Ethernet address: 00:21:5e:20:19:b8 Jan 29 10:02:57 Cquad kernel: bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit,133MHz); B/C (3.4.4); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!) Jan 29 10:02:57 Cquad kernel: bce0: Gigabit link up! Jan 29 10:08:19 Cquad kernel: bce0: promiscuous mode enabled Jan 29 10:09:16 Cquad kernel: bce0: promiscuous mode disabled Now from old (working) kernel, I restored it: Jan 29 10:33:30 Cquad kernel: bce0: <QLogic NetXtreme II BCM5708 1000Base-SX (B2)> me m 0xdc000000-0xddffffff irq 17 at device 0.0 on pci4 Jan 29 10:33:30 Cquad kernel: bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled but not running! Jan 29 10:33:30 Cquad kernel: brgphy0: <BCM5708S 1000/2500baseSX PHY> PHY 2 on miibus0 Jan 29 10:33:30 Cquad kernel: brgphy0: 1000baseSX-FDX, auto-neg workaround, auto Jan 29 10:33:30 Cquad kernel: bce0: Ethernet address: 00:21:5e:20:19:b8 Jan 29 10:33:30 Cquad kernel: bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit,133MHz); B/C (3.4.4); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!) Jan 29 10:33:30 Cquad kernel: bce0: Gigabit link up! Jan 29 10:33:42 Cquad kernel: bce0: /usr/src/sys/dev/bce/if_bce.c(7869): Watchdog timeout occurred, resetting! Jan 29 10:33:42 Cquad kernel: bce0: link state changed to DOWN Jan 29 10:33:42 Cquad kernel: bce0: Jan 29 10:33:42 Cquad kernel: bce0: link state changed to UP Jan 29 10:33:42 Cquad kernel: Gigabit link up! Jan 29 10:33:42 Cquad devd: Executing '/etc/rc.d/dhclient quietstart bce0' Nota : - bce0 exists also as bce1 (not used). - Platform is IBM Blade HS21 XM (Type 7995) -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-197168-8>