Date: Sun, 29 Oct 2006 17:49:21 +0100 From: Olli Hauer <ohauer@gmx.de> To: Gloomy Group <gloomygroup@hotmail.com> Cc: freebsd-pf@freebsd.org Subject: Re: pf altq not showing root traffic Message-ID: <4544DB91.20506@gmx.de> In-Reply-To: <BAY118-F35FCEE6F95DB1FBF508969AFFB0@phx.gbl> References: <BAY118-F35FCEE6F95DB1FBF508969AFFB0@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
Gloomy Group wrote:
> Hi,
>
> I have setup pf and altq traffic shapping on freebsd 6.1. my
> configuration is as follows;
>
> ext_if="rl0"
> int_if="rl1"
>
> table <client1> {192.168.0.1/27}
> scrub in all
>
> altq on $int_if hfsc bandwidth 912Kb queue{client1_down, default_down}
> altq on $ext_if hfsc bandwidth 256Kb queue{client1_up, default_up }
>
> # define queue for download
> queue default_down bandwidth 32Kb hfsc (realtime 32Kb upperlimit 32Kb
> default)
> queue default_up bandwidth 32Kb hfsc (realtime 32Kb upperlimit 32Kb
> default)
>
> queue client1_down bandwidth 64Kb hfsc (realtime 64Kb upperlimit 64Kb)
>
> # define queue for upload
> queue client1_up bandwidth 64Kb hfsc (realtime 64Kb upperlimit 64Kb)
>
> pass out quick on $int_if from any to <client1> queue client1_down label
> client1_down
> pass out quick on ext_if from <client1> to any queue client1_up label
> client1_up
> ---------------------------------------------------------------------------------------------------
>
>
> Shapping is working fine, except root_rl0 and root_rl1 traffic is not
> shown. What's wrong with my confiugration?
> below is the output of "pfctl -s queue -v" command
>
> bw-shaper# pfctl -s queue -v
> queue root_rl1 bandwidth 912Kb priority 0 {default_down, client1_down}
> [ pkts: 0 bytes: 0 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
> queue default_down bandwidth 32Kb hfsc( default realtime 32Kb
> upperlimit 32Kb )
> [ pkts: 1078 bytes: 108628 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
> queue client1_down bandwidth 64Kb hfsc( realtime 64Kb upperlimit 64Kb )
> [ pkts: 1625 bytes: 1395472 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
> queue root_rl0 bandwidth 256Kb priority 0 {default_up, client1_up}
> [ pkts: 0 bytes: 0 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
> queue default_up bandwidth 32Kb hfsc( default realtime 32Kb upperlimit
> 32Kb )
> [ pkts: 422 bytes: 30116 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
> queue client1_up bandwidth 64Kb hfsc( realtime 64Kb upperlimit 64Kb )
> [ pkts: 1586 bytes: 383594 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
>
>
>
> Ohcarol.
>
maybe you can get the traffic this way (since you have labels)
pfctl -vsl
here is an interesing article about that.
http://www.samag.com/documents/s=9053/sam0403j/0403j.htm
olli
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4544DB91.20506>