Date: Thu, 25 Apr 2002 09:37:11 +0200 From: Luc <luc@2113.ch> To: freebsd-questions@freebsd.org Subject: xl0 watchdog timeout Message-ID: <3CC7B227.1E1A4DB7@2113.ch>
next in thread | raw e-mail | index | archive | help
Hi FreeBSD people,
I am having trouble with my FreeBSD box !
It is complaining about xl0 watchdog timeout.
This happens twice a month (when network load raise,
but this is not really high load (~30 kbytes/s))
and the computer does not send any packet to network any more.
The only way I have it back is rebooting it through console
(wich is really a mess, since the computer is far from home !!!)
I already changed 3c905B to a new 3c905C (thinking this
was a hardware fault) but the problem just happened again
with the new card.
What do you think about it ?
hardware fault or software bug ?
Hope someone can help !
thanks
Luc
root# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-STABLE #0: Thu Feb 21 17:59:59 CET 2002
luc@www.2113.ch:/usr/src/sys/compile/www2113_2
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 603979776 (589824K bytes)
avail memory = 584138752 (570448K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 5
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 10
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc029a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc029a09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 15.0 irq 5
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem
0xeb000000-0xeb00007f irq 10 at device 17.0 on pci0
xl0: Ethernet address: 00:04:75:8e:e6:97
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT366 ATA66 controller> port
0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
ata2: at 0xd800 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port
0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0
ata3: at 0xe400 on atapci2
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging limited to 100 packets/entry by
default
SMP: AP CPU #1 Launched!
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA33
ad2: 6199MB <Maxtor 90650U2> [12595/16/63] at ata1-master UDMA33
acd0: CDROM <40X PCA403CD> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CC7B227.1E1A4DB7>