Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 19 May 2007 11:15:49 -0700
From:      Norbert Papke <fbsd-ml@scrapper.ca>
To:        freebsd-questions@freebsd.org
Subject:   Re: acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
Message-ID:  <200705191115.49737.fbsd-ml@scrapper.ca>
In-Reply-To: <20070519172508.GA20300@panix.com>
References:  <20070518032457.GA22768@panix.com> <464D607A.2080805@gmail.com> <20070519172508.GA20300@panix.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On May 19, 2007, Joe Altman wrote:
> On Fri, May 18, 2007 at 11:14:50AM +0300, Simon Phoenix wrote:
> > I have the same error message since version 1.42.2.3 of the atapi-cam.c.
> > Hangs while writing media was fixed in 1.42.2.4, but this error message
> > not disappear.
> >
> > acd0: DMA limited to UDMA33, controller found non-ATA66 cable
> > acd0: DVDR <ASUS DRW-1604P/1.09> at ata1-master UDMA33
> > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00
> > 0x01

> What I cannot figure out is why only two people are reporting the
> existence of this problem.

The reason I have not commented on this is that, other than the error message 
on boot, I have not had any problems.

~ %camcontrol devlist
<LITE-ON LTR-32123S XS0U>          at scbus2 target 0 lun 0 (cd0,pass0)

~ %dmesg | grep acd0
acd0: CDRW <LITE-ON LTR-32123S/XS0U> at ata1-master UDMA33
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00

~ %grep FBSDID /usr/src/sys/dev/ata/atapi-cam.c
__FBSDID("$FreeBSD: src/sys/dev/ata/atapi-cam.c,v 1.42.2.4 2007/05/03 09:38:54 
thomas Exp $");

Cheers.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705191115.49737.fbsd-ml>