Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 6 Mar 2003 15:58:34 -0800 (PST)
From:      "Justin T. Gibbs" <gibbs@FreeBSD.org>
To:        src-committers@FreeBSD.org, cvs-src@FreeBSD.org, cvs-all@FreeBSD.org
Subject:   cvs commit: src/sys/dev/aic7xxx aic79xx.c aic79xx.h aic79xx_inline.h aic79xx_pci.c
Message-ID:  <200303062358.h26NwYGf071222@repoman.freebsd.org>

next in thread | raw e-mail | index | archive | help
gibbs       2003/03/06 15:58:34 PST

  FreeBSD src repository

  Modified files:
    sys/dev/aic7xxx      aic79xx.c aic79xx.h aic79xx_inline.h 
                         aic79xx_pci.c 
  Log:
  aic79xx.c:
          Include read streaming in the PPR flags we display in diagnostics.
  
          In ahd_reset(), set the known mode after our initial pause prior to
          setting the mode. We can't just set the mode directly because the
          current mode, after the pause, is most likely unknown and setting the
          mode when the saved mode is unknown will trigger an assertion in
          the mode debug code.
  
          Complete an audit for SCB RAM reads.  These reads must be performed
          via the special ahd_in?_scbram() methods so we can perform a
          Rev A. PCI-X workaround.
  
          Remove a superfluous mode save operation that was performed just
          prior to a call to ahd_clear_critical_section().  The saved mode
          was never restored and wouldn't have been valid anyway since the
          mode could change while single stepping out of a critical section.
  
  aic79xx.h:
          Add new BUG definition AHD_PCIX_SCBRAM_RD_BUG.
  
  aic79xx_inline.h:
          Update ahd_inb_scbram routine to check for AHD_PCIX_SCBRAM_RD_BUG
          and only apply the workaround if this bug is active.  The old code
          applied the workaround in all cases.
  
  aic79xx_pci.c:
          Set AHD_PCIX_SCBRAM_RD_BUG for the A4.
  
          Remove an attempted saved_modes call in ahd_pci_test_register_access().
          Saving the modes can only occur when we are paused, but the call was
          happening before the chip was known to be paused.  Restoring the
          modes doesn't make sense either since the code makes no assumptions
          about the state of the sequencer until the first time the mode is set
          by the driver.  This happens after the registers are successfully
          mapped.
  
  Revision  Changes    Path
  1.11      +18 -11    src/sys/dev/aic7xxx/aic79xx.c
  1.9       +19 -16    src/sys/dev/aic7xxx/aic79xx.h
  1.8       +3 -2      src/sys/dev/aic7xxx/aic79xx_inline.h
  1.9       +6 -9      src/sys/dev/aic7xxx/aic79xx_pci.c

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe cvs-all" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303062358.h26NwYGf071222>