Date: Fri, 18 Oct 2019 11:39:53 +1100 From: edenist <edenist@edenist.net> To: freebsd-virtualization@freebsd.org,Artur Moor <digunit24@gmail.com> Subject: Re: Alpine Linux (alpine-virt-3.10.2) as guest in bhyve (FreeBSD 12.0-RELEASE-p10) Message-ID: <970C42D5-F891-4EBC-BE29-CE8D25650C28@edenist.net> In-Reply-To: <CAGru6Pts0vze3fZC-5keucMKv-O9Pf8xcK9B=EmTfzuv%2BZ-4xQ@mail.gmail.com> References: <CAGru6Pts0vze3fZC-5keucMKv-O9Pf8xcK9B=EmTfzuv%2BZ-4xQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
------C0A745GSQUGPURBB8105UWUZ3JG6TS
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=utf-8
Hi Artur,
I'm by no means a bhyve expert, but I have had similar kernel panics occur=
on my linux VMs over the last year=2E In my experience, it is related to m=
eltdown/spectre mitigations, in particular those which are using features/M=
SRs implemented through microcode=2E There appears to be some confusion whe=
n a linux VM expects CPU features to be available, but they aren't properly=
exposed on the host=2E=20
I would recommend checking which microcode your CPU has and which features=
it exposes on the host=2E Make sure you've got devcpu-data installed which=
will keep your microcode up to date [if that's something you want to happe=
n]=2E=20
Try disabling various mitigation features by passing the relevant kernel p=
arameters at boot [on the VM]=2E They keep changing the syntax, but it will=
be something like pti=3Doff, spectre_v2=3Doff etc=2E=2E=2E=2E You may be a=
ble to bisect which mitigation is causing the issues=2E=20
Hope it helps!
On 18 October 2019 1:39:19 am AEDT, Artur Moor <digunit24@gmail=2Ecom> wro=
te:
>I have trouble with Alpine Linux as a guest in bhyve=2E When I try to
>start the installation 'vm install alpine
>alpine-virt-3=2E10=2E2-x86_64=2Eiso' I get the following message in the
>console of the vm:
>[ 0=2E000000] Linux version 4=2E19=2E67-0-virt
>(buildozer@build-3-10-x86_64) (gcc version 8=2E3=2E0 (Alpine 8=2E3=2E0))
>#1-Alpine SMP Mon Aug 19 10:05:34 UTC 2019
>[ 0=2E000000] Command line: console=3DttyS0
>BOOT_IMAGE=3D/boot/vmlinuz-virt initrd=3D/boot/initramfs-virt
>alpine_dev=3Dcdrom:iso9660
>modules=3Dloop,squashfs,sd-mod,usb-storage,sr-mod
>[ 0=2E000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
>point registers'
>[ 0=2E000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[ 0=2E000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[ 0=2E000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
>[ 0=2E000000] x86/fpu: Enabled xstate features 0x7, context size is
>832 bytes, using 'standard' format=2E
>[ 0=2E000000] BIOS-provided physical RAM map:
>[ 0=2E000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fffe]
>usable
>[ 0=2E000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff]
>usable
>[ 0=2E000000] NX (Execute Disable) protection: active
>[ 0=2E000000] SMBIOS 2=2E6 present=2E
>[ 0=2E000000] DMI: BHYVE, BIOS 1=2E00 03/14/2014
>[ 0=2E000000] tsc: Fast TSC calibration using PIT
>[ 0=2E000000] tsc: Detected 3099=2E325 MHz processor
>[ 0=2E000135] last_pfn =3D 0x20000 max_arch_pfn =3D 0x400000000
>[ 0=2E000144] Disabled
>[ 0=2E000145] x86/PAT: MTRRs disabled, skipping PAT initialization
>too=2E
>[ 0=2E000147] CPU MTRRs all blank - virtualized system=2E
>[ 0=2E000148] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT=20
>UC- UC
>[ 0=2E000173] Using GB pages for direct mapping
>[ 0=2E000209] RAMDISK: [mem 0x02aeb000-0x02fbafff]
>[ 0=2E000219] ACPI: Early table checksum verification disabled
>[ 0=2E000239] ACPI: RSDP 0x00000000000F2400 000024 (v02 BHYVE )
>[ 0=2E000241] ACPI: XSDT 0x00000000000F2480 000044 (v01 BHYVE BVXSDT
> 00000001 INTL 20181003)
>[ 0=2E000245] ACPI: APIC 0x00000000000F2500 00005A (v01 BHYVE BVMADT
> 00000001 INTL 20181003)
>[ 0=2E000248] ACPI: FACP 0x00000000000F2600 00010C (v05 BHYVE BVFACP
> 00000001 INTL 20181003)
>[ 0=2E000251] ACPI: DSDT 0x00000000000F2800 00094B (v02 BHYVE BVDSDT
> 00000001 INTL 20181003)
>[ 0=2E000253] ACPI: FACS 0x00000000000F27C0 000040
>[ 0=2E000255] ACPI: FACS 0x00000000000F27C0 000040
>[ 0=2E000257] ACPI: HPET 0x00000000000F2740 000038 (v01 BHYVE BVHPET
> 00000001 INTL 20181003)
>[ 0=2E000259] ACPI: MCFG 0x00000000000F2780 00003C (v01 BHYVE BVMCFG
> 00000001 INTL 20181003)
>[ 0=2E000264] Setting APIC routing to physical flat=2E
>[ 0=2E000309] Zone ranges:
>[ 0=2E000309] DMA [mem 0x0000000000001000-0x0000000000ffffff]
>[ 0=2E000311] DMA32 [mem 0x0000000001000000-0x000000001fffffff]
>[ 0=2E000312] Normal empty
>[ 0=2E000312] Movable zone start for each node
>[ 0=2E000313] Early memory node ranges
>[ 0=2E000314] node 0: [mem 0x0000000000001000-0x000000000009efff]
>[ 0=2E000315] node 0: [mem 0x0000000000100000-0x000000001fffffff]
>[ 0=2E000328] Reserved but unavailable: 98 pages
>[ 0=2E000329] Initmem setup node 0 [mem
>0x0000000000001000-0x000000001fffffff]
>[ 0=2E007443] ACPI: PM-Timer IO Port: 0x408
>[ 0=2E007449] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[ 0=2E007475] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000,
>GSI 0-31
>[ 0=2E007476] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high
>edge)
>[ 0=2E007478] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
>level)
>[ 0=2E007482] Using ACPI (MADT) for SMP configuration information
>[ 0=2E007483] ACPI: HPET id: 0x80860701 base: 0xfed00000
>[ 0=2E007492] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>[ 0=2E007505] [mem 0x20000000-0xffffffff] available for PCI devices
>[ 0=2E007506] Booting paravirtualized kernel on bare hardware
>[ 0=2E007508] clocksource: refined-jiffies: mask: 0xffffffff
>max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[ 0=2E039227] random: get_random_bytes called from
>start_kernel+0x8e/0x4b0 with crng_init=3D0
>[ 0=2E039232] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32
>nr_cpu_ids:1 nr_node_ids:1
>[ 0=2E040672] percpu: Embedded 44 pages/cpu s142104 r8192 d29928
>u2097152
>[ 0=2E040691] Built 1 zonelists, mobility grouping on=2E Total pages:
>128905
>[ 0=2E040693] Kernel command line: console=3DttyS0
>BOOT_IMAGE=3D/boot/vmlinuz-virt initrd=3D/boot/initramfs-virt
>alpine_dev=3Dcdrom:iso9660
>modules=3Dloop,squashfs,sd-mod,usb-storage,sr-mod
>[ 0=2E041084] Dentry cache hash table entries: 65536 (order: 7, 524288
>bytes)
>[ 0=2E041261] Inode-cache hash table entries: 32768 (order: 6, 262144
>bytes)
>[ 0=2E042187] Memory: 491192K/523896K available (8204K kernel code,
>731K rwdata, 2068K rodata, 1140K init, 608K bss, 32704K reserved, 0K
>cma-reserved)
>[ 0=2E042312] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D=
1,
>Nodes=3D1
>[ 0=2E042489] rcu: Hierarchical RCU implementation=2E
>[ 0=2E042490] rcu: RCU restricting CPUs from NR_CPUS=3D32 to
>nr_cpu_ids=3D1=2E
>[ 0=2E042492] rcu: Adjusting geometry for rcu_fanout_leaf=3D16,
>nr_cpu_ids=3D1
>[ 0=2E042597] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
>[ 0=2E042919] Console: colour EGA 80x25
>[ 0=2E099439] console [ttyS0] enabled
>[ 0=2E099897] ACPI: Core revision 20180810
>[ 0=2E100580] clocksource: hpet: mask: 0xffffffff max_cycles:
>0xffffffff, max_idle_ns: 113919999973 ns
>[ 0=2E101779] APIC: Switch to symmetric I/O mode setup
>[ 0=2E103710] =2E=2ETIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1=
pin2=3D-1
>[ 0=2E152418] clocksource: tsc-early: mask: 0xffffffffffffffff
>max_cycles: 0x2cacc9e0a25, max_idle_ns: 440795241691 ns
>[ 0=2E153779] Calibrating delay loop (skipped), value calculated
>using timer frequency=2E=2E 6198=2E65 BogoMIPS (lpj=3D30993250)
>[ 0=2E155179] pid_max: default: 32768 minimum: 301
>[ 0=2E155830] Mount-cache hash table entries: 1024 (order: 1, 8192
>bytes)
>[ 0=2E156676] Mountpoint-cache hash table entries: 1024 (order: 1,
>8192 bytes)
>[ 0=2E157888] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
>[ 0=2E158688] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768,
>1GB 0
>[ 0=2E159541] Spectre V1 : Mitigation: usercopy/swapgs barriers and
>__user pointer sanitization
>[ 0=2E160636] Spectre V2 : Spectre mitigation: LFENCE not
>serializing, switching to generic retpoline
>[ 0=2E161800] Spectre V2 : Mitigation: Full generic retpoline
>[ 0=2E162503] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
>Filling RSB on context switch
>[ 0=2E163777] Spectre V2 : mitigation: Enabling conditional Indirect
>Branch Prediction Barrier
>[ 0=2E164852] Speculative Store Bypass: Vulnerable
>[ 0=2E168104] Freeing SMP alternatives memory: 24K
>[ 0=2E173772] smpboot: CPU0: AMD EPYC 7371 16-Core Processor (family:
>0x17, model: 0x1, stepping: 0x2)
>[ 0=2E173772] Performance Events: PMU not available due to
>virtualization, using software events only=2E
>[ 0=2E173772] rcu: Hierarchical SRCU implementation=2E
>[ 0=2E173772] random: crng done (trusting CPU's manufacturer)
>[ 0=2E173772] NMI watchdog: Perf NMI watchdog permanently disabled
>[ 0=2E173772] smp: Bringing up secondary CPUs =2E=2E=2E
>[ 0=2E173772] smp: Brought up 1 node, 1 CPU
>[ 0=2E173772] smpboot: Max logical packages: 1
>[ 0=2E173772] ----------------
>[ 0=2E173772] | NMI testsuite:
>[ 0=2E173772] --------------------
>[ 0=2E173772] remote IPI: ok |
>[ 0=2E173772] local IPI: ok |
>[ 0=2E173772] --------------------
>[ 0=2E173772] Good, all 2 testcases passed! |
>[ 0=2E173772] ---------------------------------
>[ 0=2E173779] smpboot: Total of 1 processors activated (6198=2E65
>BogoMIPS)
>[ 0=2E174744] devtmpfs: initialized
>[ 0=2E175250] x86/mm: Memory block size: 128MB
>[ 0=2E176042] clocksource: jiffies: mask: 0xffffffff max_cycles:
>0xffffffff, max_idle_ns: 19112604462750000 ns
>[ 0=2E177302] futex hash table entries: 256 (order: 2, 16384 bytes)
>[ 0=2E178241] NET: Registered protocol family 16
>[ 0=2E178896] audit: initializing netlink subsys (disabled)
>[ 0=2E179724] cpuidle: using governor ladder
>[ 0=2E180267] cpuidle: using governor menu
>[ 0=2E181276] audit: type=3D2000 audit(1571322221=2E070:1):
>state=3Dinitialized audit_enabled=3D0 res=3D1
>[ 0=2E182637] ACPI FADT declares the system doesn't support PCIe
>ASPM, so disable it
>[ 0=2E183626] ACPI: bus type PCI registered
>[ 0=2E183772] acpiphp: ACPI Hot Plug PCI Controller Driver version:
>0=2E5
>[ 0=2E183907] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>0xe0000000-0xefffffff] (base 0xe0000000)
>[ 0=2E185106] PCI: not using MMCONFIG
>[ 0=2E185564] PCI: Using configuration type 1 for base access
>[ 0=2E186284] PCI: Using configuration type 1 for extended access
>[ 0=2E192668] HugeTLB registered 1=2E00 GiB page size, pre-allocated 0
>pages
>[ 0=2E193776] HugeTLB registered 2=2E00 MiB page size, pre-allocated 0
>pages
>[ 0=2E194758] ACPI: Added _OSI(Module Device)
>[ 0=2E195321] ACPI: Added _OSI(Processor Device)
>[ 0=2E195895] ACPI: Added _OSI(3=2E0 _SCP Extensions)
>[ 0=2E196506] ACPI: Added _OSI(Processor Aggregator Device)
>[ 0=2E197232] ACPI: Added _OSI(Linux-Dell-Video)
>[ 0=2E197813] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[ 0=2E198743] ACPI: 1 ACPI AML tables successfully acquired and loaded
>[ 0=2E199794] ACPI: Interpreter enabled
>[ 0=2E200297] ACPI: (supports S0 S5)
>[ 0=2E200747] ACPI: Using IOAPIC for interrupt routing
>[ 0=2E201408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>0xe0000000-0xefffffff] (base 0xe0000000)
>[ 0=2E202648] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
>in ACPI motherboard resources
>[ 0=2E203781] PCI: Using host bridge windows from ACPI; if necessary,
>use "pci=3Dnocrs" and report a bug
>[ 0=2E205787] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00])
>[ 0=2E206551] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM
>ClockPM Segments MSI]
>[ 0=2E207620] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling
>ASPM
>[ 0=2E208525] PCI host bridge to bus 0000:00
>[ 0=2E209051] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
>window]
>[ 0=2E209937] pci_bus 0000:00: root bus resource [io 0x0d00-0x1fff
>window]
>[ 0=2E210823] pci_bus 0000:00: root bus resource [io 0x2000-0x207f
>window]
>[ 0=2E211686] pci_bus 0000:00: root bus resource [mem
>0xc0000000-0xc01fffff window]
>[ 0=2E212662] pci_bus 0000:00: root bus resource [mem
>0xd000000000-0xd0000fffff window]
>[ 0=2E213774] pci_bus 0000:00: root bus resource [bus 00]
>[ 0=2E217648] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10
>11 12 14 15)
>[ 0=2E218651] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 9 10
>11 12 14 15)
>[ 0=2E219671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10
>11 12 14 15)
>[ 0=2E220672] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11
>12 14 15) *0, disabled=2E
>[ 0=2E221806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11
>12 14 15) *0, disabled=2E
>[ 0=2E222926] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11
>12 14 15) *0, disabled=2E
>[ 0=2E223823] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11
>12 14 15) *0, disabled=2E
>[ 0=2E224985] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11
>12 14 15) *0, disabled=2E
>[ 0=2E226176] SCSI subsystem initialized
>[ 0=2E227134] pps_core: LinuxPPS API ver=2E 1 registered
>[ 0=2E227811] pps_core: Software ver=2E 5=2E3=2E6 - Copyright 2005-200=
7
>Rodolfo Giometti <giometti@linux=2Eit>
>[ 0=2E229053] PTP clock support registered
>[ 0=2E229737] PCI: Using ACPI for IRQ routing
>[ 0=2E282465] clocksource: Switched to clocksource tsc-early
>[ 0=2E283772] VFS: Disk quotas dquot_6=2E6=2E0
>[ 0=2E283772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
>bytes)
>[ 0=2E283772] pnp: PnP ACPI init
>[ 0=2E283772] system 00:02: [io 0x0220-0x0223] has been reserved
>[ 0=2E283772] system 00:02: [io 0x0224-0x0227] has been reserved
>[ 0=2E283772] system 00:02: [io 0x04d0-0x04d1] has been reserved
>[ 0=2E284356] system 00:02: [io 0x0400-0x0407] has been reserved
>[ 0=2E285134] system 00:02: [mem 0xe0000000-0xefffffff] has been
>reserved
>[ 0=2E286071] pnp: PnP ACPI: found 6 devices
>[ 0=2E292735] clocksource: acpi_pm: mask: 0xffffff max_cycles:
>0xffffff, max_idle_ns: 2085701024 ns
>[ 0=2E293934] pci 0000:00:03=2E0: BAR 6: assigned [mem
>0xc0000800-0xc0000fff pref]
>[ 0=2E294869] pci 0000:00:04=2E0: BAR 6: assigned [mem
>0xc0001000-0xc00017ff pref]
>[ 0=2E295823] pci 0000:00:05=2E0: BAR 6: assigned [mem
>0xc0001800-0xc0001fff pref]
>[ 0=2E296790] pci 0000:00:1f=2E0: BAR 6: assigned [mem
>0xc0006000-0xc00067ff pref]
>[ 0=2E297807] NET: Registered protocol family 2
>[ 0=2E298456] tcp_listen_portaddr_hash hash table entries: 256
>(order: 0, 4096 bytes)
>[ 0=2E299466] TCP established hash table entries: 4096 (order: 3,
>32768 bytes)
>[ 0=2E300405] TCP bind hash table entries: 4096 (order: 4, 65536
>bytes)
>[ 0=2E301290] TCP: Hash tables configured (established 4096 bind 4096)
>[ 0=2E302158] UDP hash table entries: 256 (order: 1, 8192 bytes)
>[ 0=2E302919] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>[ 0=2E303767] NET: Registered protocol family 1
>[ 0=2E304392] pci 0000:00:1f=2E0: Activating ISA DMA hang workarounds
>[ 0=2E305764] Unpacking initramfs=2E=2E=2E
>[ 0=2E366638] Freeing initrd memory: 4928K
>[ 0=2E367535] Initialise system trusted keyrings
>[ 0=2E368340] workingset: timestamp_bits=3D46 max_order=3D17
>bucket_order=3D0
>[ 0=2E371627] Key type asymmetric registered
>[ 0=2E372215] Block layer SCSI generic (bsg) driver version 0=2E4
>loaded (major 250)
>[ 0=2E373247] io scheduler noop registered
>[ 0=2E373787] io scheduler deadline registered (default)
>[ 0=2E374466] io scheduler mq-deadline registered (default)
>[ 0=2E375099] io scheduler kyber registered
>[ 0=2E375764] ERST DBG: ERST support is disabled=2E
>[ 0=2E376430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[ 0=2E398514] 00:03: ttyS0 at I/O 0x3f8 (irq =3D 4, base_baud =3D 1152=
00)
>is a 16550A
>[ 0=2E420753] 00:04: ttyS1 at I/O 0x2f8 (irq =3D 3, base_baud =3D 1152=
00)
>is a 16550A
>[ 0=2E421950] VMware PVSCSI driver - version 1=2E0=2E7=2E0-k
>[ 0=2E422869] ahci 0000:00:03=2E0: SSS flag set, parallel bus scan
>disabled
>[ 0=2E423866] ahci 0000:00:03=2E0: AHCI 0001=2E0300 32 slots 6 ports 6
>Gbps 0x1 impl SATA mode
>[ 0=2E424892] ahci 0000:00:03=2E0: flags: 64bit ncq sntf ilck stag pm
>led clo pio slum part sxs apst
>[ 0=2E426695] scsi host0: ahci
>[ 0=2E427181] scsi host1: ahci
>[ 0=2E427638] scsi host2: ahci
>[ 0=2E428102] scsi host3: ahci
>[ 0=2E428562] scsi host4: ahci
>[ 0=2E429027] scsi host5: ahci
>[ 0=2E429455] ata1: SATA max UDMA/133 abar m1024@0xc0000000 port
>0xc0000100 irq 32
>[ 0=2E430437] ata2: DUMMY
>[ 0=2E430752] ata3: DUMMY
>[ 0=2E431095] ata4: DUMMY
>[ 0=2E431426] ata5: DUMMY
>[ 0=2E431745] ata6: DUMMY
>[ 0=2E432116] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
>at 0x60,0x64 irq 1,12
>[ 0=2E433333] i8042: Warning: Keylock active
>[ 0=2E434382] serio: i8042 KBD port at 0x60,0x64 irq 1
>[ 0=2E435029] serio: i8042 AUX port at 0x60,0x64 irq 12
>[ 0=2E435771] ACPI Error: Could not enable RealTimeClock event
>(20180810/evxfevnt-184)
>[ 0=2E436815] ACPI Warning: Could not enable fixed event -
>RealTimeClock (4) (20180810/evxface-620)
>[ 0=2E438442] input: AT Raw Set 2 keyboard as
>/devices/platform/i8042/serio0/input/input0
>[ 0=2E439904] rtc_cmos 00:05: registered as rtc0
>[ 0=2E440508] rtc_cmos 00:05: alarms up to one day, y3k, 114 bytes
>nvram
>[ 0=2E441413] gre: GRE over IPv4 demultiplexor driver
>[ 0=2E442040] Key type dns_resolver registered
>[ 0=2E442624] sched_clock: Marking stable (374742215,
>60992938)->(563738129, -128002976)
>[ 0=2E443796] registered taskstats version 1
>[ 0=2E444344] Loading compiled-in X=2E509 certificates
>[ 0=2E445222] rtc_cmos 00:05: setting system clock to 2019-10-17
>14:23:41 UTC (1571322221)
>[ 0=2E775259] ata1: SATA link up 6=2E0 Gbps (SStatus 133 SControl 300)
>[ 0=2E776094] ata1=2E00: ATAPI: BHYVE SATA DVD ROM, 001, max UDMA/133
>[ 0=2E776965] ata1=2E00: configured for UDMA/133
>[ 0=2E777642] scsi 0:0:0:0: CD-ROM BHYVE BHYVE DVD-ROM
> 001 PQ: 0 ANSI: 5
>[ 0=2E779270] Freeing unused kernel image memory: 1140K
>[ 0=2E805193] Write protecting the kernel read-only data: 14336k
>[ 0=2E806217] Freeing unused kernel image memory: 2016K
>[ 0=2E807114] Freeing unused kernel image memory: 2028K
>[ 0=2E807779] rodata_test: all tests were successful
>[ 0=2E808405] Run /init as init process
>[ 0=2E809435] general protection fault: 0000 [#1] SMP NOPTI
>[ 0=2E810155] CPU: 0 PID: 1 Comm: init Not tainted 4=2E19=2E67-0-virt
>#1-Alpine
>[ 0=2E811032] Hardware name: BHYVE, BIOS 1=2E00 03/14/2014
>[ 0=2E811738] RIP: 0010:switch_mm_irqs_off+0xa4/0x422
>[ 0=2E812352] Code: 48 c1 e8 09 83 e0 01 48 09 c6 65 48 8b 05 33 24
>fd 4d 48 39 c6 74 15 48 09 f0 a8 01 74 0e b9 49 00 00 00 b8 01 00 00
>00 31 d2 <0f> 30 65 48 89 35 11 24 fd 4d 0f 1f 44 00 00 eb 2e 65 48 8b
>05 02
>[ 0=2E814784] RSP: 0018:ffffb0518000bcf8 EFLAGS: 00010046
>[ 0=2E815475] RAX: 0000000000000001 RBX: 0000000000000000 RCX:
>0000000000000049
>[ 0=2E816413] RDX: 0000000000000000 RSI: ffff9ced1e452c00 RDI:
>ffff9ced1e690000
>[ 0=2E817342] RBP: ffff9ced1e452c00 R08: ffff9ced1f2221f8 R09:
>0000000000000000
>[ 0=2E818279] R10: 000000000000025e R11: ffff9ced1e690080 R12:
>ffff9ced1e453800
>[ 0=2E819216] R13: ffff9ced1e690000 R14: ffff9ced1e453800 R15:
>ffff9ced1e452c00
>[ 0=2E820157] FS: 00007f23ec2cdd48(0000) GS:ffff9ced1f200000(0000)
>knlGS:0000000000000000
>[ 0=2E821185] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[ 0=2E821959] CR2: 00005639f0bdf8b8 CR3: 000000001eede000 CR4:
>00000000000406b0
>[ 0=2E822864] Call Trace:
>[ 0=2E823204] __schedule+0x69b/0x756
>[ 0=2E823668] schedule+0x5b/0x6c
>[ 0=2E824090] do_wait+0x1bc/0x21e
>[ 0=2E824516] kernel_wait4+0xc0/0x115
>[ 0=2E825009] ? __ia32_compat_sys_waitid+0x18/0x18
>[ 0=2E825623] __se_sys_wait4+0x37/0x86
>[ 0=2E826127] ? handle_mm_fault+0x149/0x19f
>[ 0=2E826691] ? __do_page_fault+0x36a/0x3fc
>[ 0=2E827251] do_syscall_64+0x50/0xeb
>[ 0=2E827720] entry_SYSCALL_64_after_hwframe+0x44/0xa9
>[ 0=2E828382] RIP: 0033:0x7f23ec290080
>[ 0=2E828859] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7
>48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24
>08 0f 05 <c3> e9 a7 d3 ff ff 41 54 b8 02 00 00 00 49 89 f4 be 00 08 08
>00 55
>[ 0=2E831332] RSP: 002b:00007ffe1e68a808 EFLAGS: 00000246 ORIG_RAX:
>000000000000003d
>[ 0=2E832335] RAX: ffffffffffffffda RBX: 00007f23ec2cdd48 RCX:
>00007f23ec290080
>[ 0=2E833276] RDX: 0000000000000000 RSI: 00007ffe1e68a86c RDI:
>ffffffffffffffff
>[ 0=2E834240] RBP: 000000000000003d R08: 0000000000000000 R09:
>0000000000000000
>[ 0=2E835161] R10: 0000000000000000 R11: 0000000000000246 R12:
>00005639f10cfce0
>[ 0=2E836069] R13: 00007ffe1e68a86c R14: 00005639f0bc3836 R15:
>0000000000000000
>[ 0=2E837030] Modules linked in:
>[ 0=2E837437] ---[ end trace f7b78a6a0742f2da ]---
>[ 0=2E838032] RIP: 0010:switch_mm_irqs_off+0xa4/0x422
>[ 0=2E838669] Code: 48 c1 e8 09 83 e0 01 48 09 c6 65 48 8b 05 33 24
>fd 4d 48 39 c6 74 15 48 09 f0 a8 01 74 0e b9 49 00 00 00 b8 01 00 00
>00 31 d2 <0f> 30 65 48 89 35 11 24 fd 4d 0f 1f 44 00 00 eb 2e 65 48 8b
>05 02
>[ 0=2E841119] RSP: 0018:ffffb0518000bcf8 EFLAGS: 00010046
>[ 0=2E841813] RAX: 0000000000000001 RBX: 0000000000000000 RCX:
>0000000000000049
>[ 0=2E842771] RDX: 0000000000000000 RSI: ffff9ced1e452c00 RDI:
>ffff9ced1e690000
>[ 0=2E843681] RBP: ffff9ced1e452c00 R08: ffff9ced1f2221f8 R09:
>0000000000000000
>[ 0=2E844622] R10: 000000000000025e R11: ffff9ced1e690080 R12:
>ffff9ced1e453800
>[ 0=2E845560] R13: ffff9ced1e690000 R14: ffff9ced1e453800 R15:
>ffff9ced1e452c00
>[ 0=2E846529] FS: 00007f23ec2cdd48(0000) GS:ffff9ced1f200000(0000)
>knlGS:0000000000000000
>[ 0=2E847627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[ 0=2E848383] CR2: 00005639f0bdf8b8 CR3: 000000001eede000 CR4:
>00000000000406b0
>
>Does anyone have an idea how I can fix the problem?
>
>root@host:~ # cat /srv/vmm/alpine/vm-bhyve=2Elog
>Oct 17 16:23:37: initialising
>Oct 17 16:23:37: [loader: grub]
>Oct 17 16:23:37: [cpu: 1]
>Oct 17 16:23:37: [memory: 512M]
>Oct 17 16:23:37: [hostbridge: standard]
>Oct 17 16:23:37: [com ports: com1]
>Oct 17 16:23:37: [uuid: cf6a78d4-f0d1-11e9-ab90-002590b971a4]
>Oct 17 16:23:37: [utctime: yes]
>Oct 17 16:23:37: [debug mode: no]
>Oct 17 16:23:37: [primary disk: disk0=2Eimg]
>Oct 17 16:23:37: [primary disk dev: file]
>Oct 17 16:23:37: initialising network device tap0
>Oct 17 16:23:37: adding tap0 -> vm-public (public addm)
>Oct 17 16:23:37: bring up tap0 -> vm-public (public addm)
>Oct 17 16:23:37: booting
>Oct 17 16:23:37: create file /srv/vmm/alpine/device=2Emap
>Oct 17 16:23:37: -> (cd0) /srv/vmm/=2Eiso/alpine-virt-3=2E10=2E2-x86_64=
=2Eiso
>Oct 17 16:23:37: -> (hd0) /srv/vmm/alpine/disk0=2Eimg
>Oct 17 16:23:37: create file /srv/vmm/alpine/grub=2Ecfg
>Oct 17 16:23:37: -> timeout=3D3
>Oct 17 16:23:37: -> menuentry 'alpine (bhyve install)' {
>Oct 17 16:23:37: -> root=3Dcd0
>Oct 17 16:23:37: -> linux /boot/vmlinuz-virt
>initrd=3D/boot/initramfs-virt alpine_dev=3Dcdrom:iso9660
>modules=3Dloop,squashfs,sd-mod,usb-storage,sr-mod
>Oct 17 16:23:37: -> initrd /boot/initramfs-virt
>Oct 17 16:23:37: -> }
>Oct 17 16:23:37: /usr/local/sbin/grub-bhyve -c /dev/nmdm-alpine=2E1A -m
>/srv/vmm/alpine/device=2Emap -M 512M -r host -d /srv/vmm/alpine alpine
>Oct 17 16:23:41: [bhyve options: -c 1 -m 512M -AHP -U
>cf6a78d4-f0d1-11e9-ab90-002590b971a4 -u]
>Oct 17 16:23:41: [bhyve devices: -s 0,hostbridge -s 31,lpc -s
>4:0,virtio-blk,/srv/vmm/alpine/disk0=2Eimg -s
>5:0,virtio-net,tap0,mac=3D58:9c:fc:03:fe:9b]
>Oct 17 16:23:41: [bhyve console: -l com1,/dev/nmdm-alpine=2E1A]
>Oct 17 16:23:41: [bhyve iso device: -s
>3:0,ahci-cd,/srv/vmm/=2Eiso/alpine-virt-3=2E10=2E2-x86_64=2Eiso,ro]
>Oct 17 16:23:41: starting bhyve (run 1)
>
>root@host:~ # uname -a
>FreeBSD host=2Eexample=2Ecom 12=2E0-RELEASE-p10 FreeBSD 12=2E0-RELEASE-p1=
0
>GENERIC amd64
>
>root@host:~ # pkg info
>bhyve-firmware-1=2E0_1 Collection of Firmware for bhyve
>ca_root_nss-3=2E46=2E1 Root certificate bundle from the Mozil=
la
>Project
>curl-7=2E66=2E0 Command line tool and library for
>transferring data with URLs
>dmidecode-3=2E2 Tool for dumping DMI (SMBIOS) contents
>in human-readable format
>e2fsprogs-libuuid-1=2E45=2E3 UUID library from e2fsprogs package
>gettext-runtime-0=2E20=2E1 GNU gettext runtime libraries and
>programs
>grub2-bhyve-0=2E40_7 Grub-emu loader for bhyve
>indexinfo-0=2E3=2E1 Utility to regenerate the GNU info pag=
e
>index
>libestr-0=2E1=2E11_1 Library for some string essentials
>libfastjson-0=2E99=2E8 libfastjson is a fork from json-c
>libffi-3=2E2=2E1_3 Foreign Function Interface
>libgcrypt-1=2E8=2E5 General purpose cryptographic library
>based on the code from GnuPG
>libgpg-error-1=2E36 Common error values for all GnuPG
>components
>liblogging-1=2E0=2E6 Easy to use system logging library
>libnghttp2-1=2E39=2E2 HTTP/2=2E0 C Library
>pkg-1=2E12=2E0 Package manager
>python-3=2E6_3,2 "meta-port" for the default version of
>Python interpreter
>python3-3_3 The "meta-port" for version 3 of the
>Python interpreter
>python36-3=2E6=2E9 Interpreted object-oriented programmin=
g
>language
>readline-8=2E0=2E0 Library for editing command lines as
>they are typed
>rsyslog-8=2E1908=2E0 Syslogd supporting SQL, TCP, and TLS
>sudo-1=2E8=2E27_1 Allow others to run commands as root
>uefi-edk2-bhyve-0=2E2_1,1 UEFI-EDK2 firmware for bhyve
>uefi-edk2-bhyve-csm-0=2E2_1,1 UEFI-EDK2 firmware for bhyve with CSM
>vm-bhyve-1=2E3=2E0 Management system for bhyve virtual
>machines
>
>root@host:~ # cat /etc/rc=2Econf | grep vm
>vm_enable=3D"YES"
>vm_dir=3D"zfs:zroot/srv/vmm"
>
>root@host:~ # kldstat
>Id Refs Address Size Name
> 1 39 0xffffffff80200000 243d228 kernel
> 2 1 0xffffffff8263e000 3a9a10 zfs=2Eko
> 3 2 0xffffffff829e8000 a4f0 opensolaris=2Eko
> 4 1 0xffffffff829f3000 32b88 if_bnxt=2Eko
> 5 1 0xffffffff82f12000 2678 intpm=2Eko
> 6 1 0xffffffff82f15000 b10 smbus=2Eko
> 7 1 0xffffffff82f16000 1800 uhid=2Eko
> 8 1 0xffffffff82f18000 23a8 ums=2Eko
> 9 1 0xffffffff82f1b000 537460 vmm=2Eko
>10 1 0xffffffff83453000 b30 nmdm=2Eko
>11 1 0xffffffff83454000 6fb3 if_bridge=2Eko
>12 1 0xffffffff8345b000 4410 bridgestp=2Eko
>13 1 0xffffffff83460000 2e77 if_tap=2Eko
>
>root@host:~ # cat /srv/vmm/alpine/alpine=2Econf
>loader=3D"grub"
>cpu=3D1
>memory=3D512M
>network0_type=3D"virtio-net"
>network0_switch=3D"public"
>disk0_type=3D"virtio-blk"
>disk0_name=3D"disk0=2Eimg"
>grub_install0=3D"linux /boot/vmlinuz-virt initrd=3D/boot/initramfs-virt
>alpine_dev=3Dcdrom:iso9660
>modules=3Dloop,squashfs,sd-mod,usb-storage,sr-mod"
>grub_install1=3D"initrd /boot/initramfs-virt"
>grub_run0=3D"linux /boot/vmlinuz-virt root=3D/dev/vda3 modules=3Dext4"
>grub_run1=3D"initrd /boot/initramfs-virt"
>uuid=3D"cf6a78d4-f0d1-11e9-ab90-002590b971a4"
>network0_mac=3D"58:9c:fc:03:fe:9b"
>
>root@host:~ # cat /srv/vmm/alpine/device=2Emap
>(cd0) /srv/vmm/=2Eiso/alpine-virt-3=2E10=2E2-x86_64=2Eiso
>(hd0) /srv/vmm/alpine/disk0=2Eimg
>
>root@host:~ # cat /srv/vmm/alpine/grub=2Ecfg
>timeout=3D3
>menuentry 'alpine (bhyve install)' {
> root=3Dcd0
> linux /boot/vmlinuz-virt initrd=3D/boot/initramfs-virt
>alpine_dev=3Dcdrom:iso9660
>modules=3Dloop,squashfs,sd-mod,usb-storage,sr-mod
> initrd /boot/initramfs-virt
>}
>_______________________________________________
>freebsd-virtualization@freebsd=2Eorg mailing list
>https://lists=2Efreebsd=2Eorg/mailman/listinfo/freebsd-virtualization
>To unsubscribe, send any mail to
>"freebsd-virtualization-unsubscribe@freebsd=2Eorg"
--=20
edenist
XMPP+OMEMO/PGP: edenist@comms=2Eedenist=2Enet
PGP Key ID: 0x3D56E58002FE4317
PGP Key Fingerprint: 7240 9DD4 DB0A 953A 8F3E A8FF 3D56 E580 02FE 4317
------C0A745GSQUGPURBB8105UWUZ3JG6TS
Content-Type: application/pgp-signature; name="signature.asc"
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----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==
=a35y
-----END PGP SIGNATURE-----
------C0A745GSQUGPURBB8105UWUZ3JG6TS--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?970C42D5-F891-4EBC-BE29-CE8D25650C28>