Date: Fri, 16 Jun 1995 12:25:54 -0700 From: sjs1@primenet.com (Scott Story) To: freebsd-bugs@FreeBSD.ORG Subject: NCR53c400 Magoptic Problem Message-ID: <199506161925.MAA26927@mailhost.primenet.com>
next in thread | raw e-mail | index | archive | help
>Scott Story writes: >> >> Any help or a refferal would be apprieciated. >> I am trying to install freeBSD 2.0 on to a SCSI 1 Sony MagOptic drive. >> (486,33 8 mg. one SCSI device) >> These are the messages I am getting. >> Durring kernel boot: >> nca1: NCR-53C400 >> nca1: wating for SCSI devices to settle >> nca1: "Sony SMO-C501-00 2.22" is a type 0 removeable SCSI 1 >> sd0 (nca1) Direct Access >> sd0 (nca1) Illegal Request ASC:24,0 invalid field in CDB >> sdo could not mode sense (4), Using Fictitious Geometry, 281 (576999, 512 >> byte sectors) > >Does this happen even if you have the formatted media installed? YES with 512 Media There is 512 or 1024 byte sector media for the SMO501. > >> During sysinstall >> >> Select install >> >> nca1/0/0/sd0/timed out >> Fatal Trap 12: page fault in kernel mode >> Fault Address=0x8 >> Fault Code=supervisor read, page np >> install pointer=0x8:0xf0172c1b >> code sequence= base 0x0, limit 0xfffff, type ox1b=DPL 0,pres 1, def 32, gran 1 >> Processor eflags=interupt enabled, resume,10 PL=0 >> Current Process= 1 (sysinstall) >> int. mask= bio >> panic=page fault > >Oops. Do you have a stack back trace? NO stack back trace. How? I want to die quietly in my sleep like my grandfather, not SCREAMING! like his passengers <:) http://www.primenet.com/~sjs1/index sjs1@primenet.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506161925.MAA26927>