From owner-freebsd-sparc Tue Nov 20 20:42:42 2001 Delivered-To: freebsd-sparc@freebsd.org Received: from khavrinen.lcs.mit.edu (khavrinen.lcs.mit.edu [18.24.4.193]) by hub.freebsd.org (Postfix) with ESMTP id 6793437B405; Tue, 20 Nov 2001 20:42:35 -0800 (PST) Received: (from wollman@localhost) by khavrinen.lcs.mit.edu (8.11.4/8.11.4) id fAL4gQe43079; Tue, 20 Nov 2001 23:42:26 -0500 (EST) (envelope-from wollman) Date: Tue, 20 Nov 2001 23:42:26 -0500 (EST) From: Garrett Wollman Message-Id: <200111210442.fAL4gQe43079@khavrinen.lcs.mit.edu> To: tmm@freebsd.org Cc: sparc@freebsd.org, groudier@freebsd.org Subject: main-sym.gz Sender: owner-freebsd-sparc@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org I noticed that tmm put a new Symbios kernel up on his Web area, so I tried booting that, and it doesn't seem to work quite right, but does at least get to the mountroot prompt: ok boot net Boot device: /pci@1f,0/pci@1,1/network@1,1 File and args: Using Onboard Transceiver - Link Up. Timeout waiting for ARP/RARP packet 1f5800 Server IP address: 18.24.4.193 Client IP address: 18.24.4.196 calling kernel... sparc64_init: mdp=0xc0238aa8 kmdp=0xc0238aa8 boothowto=2048 envp=0xc0238aa0 end=0xc0400000 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-SPARC64-TMM #7: Tue Nov 20 23:52:45 CET 2001 tmm@raven.local:/p4/tmm/sparc64/sys/sparc64/compile/ULTRASYM Preloaded elf kernel "kernel" at 0xc0238aa8. Timecounter "tick" frequency 333000000 Hz CPU: Sun Microsystems UltraSparc-IIi Processor (333.00 MHZ CPU) mask=0x13 maxtl=5 maxwin=7 null: mem: nexus0: pcib0: on nexus0 pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 DVMA map: c0000000 to dfffffff pci0: physical bus=0 found-> vendor=0x108e, dev=0x5000, revid=0x13 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 found-> vendor=0x108e, dev=0x5000, revid=0x13 bus=0, slot=1, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 pci0: on pcib0 pcib1: at device 1.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 255 pcib1: I/O decode 0x0-0x1fffff, 0x200000-0x3fffff, 0x400000-0x5fffff, 0x600000-0x7fffff, 0x800000-0x9fffff, 0xa00000-0xbfffff pcib1: memory decode 0x0-0x1fffffff, 0x20000000-0x3fffffff, 0x40000000-0x5fffffff, 0x60000000-0x7fffffff, 0x80000000-0x9fffffff, 0xa0000000-0xbfffffff pci1: physical bus=2 map[10]: type 4, range 32, base 00000400, size 8, port disabled map[14]: type 1, range 32, base 00002000, size 8, memory disabled map[18]: type 1, range 32, base 00004000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 bus=2, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 intpin=a, irq=20 map[10]: type 4, range 32, base 00000800, size 8, port disabled map[14]: type 1, range 32, base 00006000, size 8, memory disabled map[18]: type 1, range 32, base 00008000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 bus=2, slot=2, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 intpin=b, irq=21 pci1: on pcib1 sym0: <875> port 0x400-0x4ff mem 0x4000-0x4fff,0x2000-0x20ff irq 20 at device 2.0 on pci1 pcib1: device sym0 requested decoded memory range 0x2000-0x20ff pcib1: device sym0 requested decoded memory range 0x4000-0x4fff sym0: chip clock is 40218KHz sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym1: <875> port 0x800-0x8ff mem 0x8000-0x8fff,0x6000-0x60ff irq 21 at device 2.1 on pci1 pcib1: device sym1 requested decoded memory range 0x6000-0x60ff pcib1: device sym1 requested decoded memory range 0x8000-0x8fff sym1: chip clock is 40218KHz sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. pcib2: at device 1.1 on pci0 pcib2: secondary bus 1 pcib2: subordinate bus 1 pcib2: I/O decode 0xc00000-0xdfffff, 0xe00000-0xffffff pcib2: memory decode 0xe0000000-0xffffffff pci2: physical bus=1 map[10]: type 1, range 32, base f0000000, size 24, enabled map[14]: type 1, range 32, base f1000000, size 23, enabled found-> vendor=0x108e, dev=0x1000, revid=0x01 bus=1, slot=1, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 map[10]: type 1, range 32, base e0000000, size 15, memory disabled found-> vendor=0x108e, dev=0x1001, revid=0x01 bus=1, slot=1, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 intpin=(broken), irq=33 map[10]: type 1, range 32, base e1000000, size 24, memory disabled map[14]: type 4, range 32, base 00000000, size 8, port disabled map[18]: type 1, range 32, base e2000000, size 12, enabled found-> vendor=0x1002, dev=0x4750, revid=0x5c bus=1, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=15 map[10]: type 4, range 32, base 00c00000, size 3, enabled map[14]: type 4, range 32, base 00c00008, size 2, enabled map[18]: type 4, range 32, base 00c00010, size 3, enabled map[1c]: type 4, range 32, base 00c00018, size 2, enabled map[20]: type 4, range 32, base 00c00020, size 4, enabled found-> vendor=0x1095, dev=0x0646, revid=0x03 bus=1, slot=3, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 intpin=a, irq=32 pci2: on pcib2 pci2: at device 1.0 (no driver attached) hme0: mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci2 pcib2: device hme0 requested decoded memory range 0xe0000000-0xe0007fff hme0: Ethernet address: 08:00:20:b0:82:89 miibus0: on hme0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: at device 2.0 (no driver attached) pci2: at device 3.0 (no driver attached) Waiting 2 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (probe0:sym0:0:0:0): Retrying Command sym0:0: ERROR (a0:0) (0-a7-80) (10/9d) @ (scripta 400:f3100000). sym0: script cmd = 9f030000 sym0: regdump: da 10 80 9d 47 10 00 0f 80 00 80 a7 80 00 07 02 00 00 40 00 08 ff ff ff. sym0: PCI STATUS = 0x2000 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. Creating DISK da0 Manual root filesystem specification: : Mount using filesystem eg. ufs:/dev/da0s1a ? List valid disk boot devices Abort manual input mountroot> (This is really surreal... I'm sitting at home talking over my ISDN line through a wireless network to my laptop which is connected to the Ultra 5's serial console. The only stranger thing would be if I were at a conference instead of at home.) I tried to tell it to mount da0a as root, which made it very unhappy: Mounting root from ufs:/dev/da0a (da0:sym0:0:0:0): Retrying Command sym0:0: ERROR (a0:0) (0-a7-80) (10/9d) @ (scripta 400:f3100000). sym0: script cmd = 9f030000 sym0: regdump: da 10 80 9d 47 10 00 0f 80 00 80 a7 80 00 07 02 00 00 40 00 08 ff ff ff. sym0: PCI STATUS = 0x2000 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. (da0:sym0:0:0:0): Retrying Command This is repated a couple of times until finally it says: (da0:sym0:0:0:0): error 5 (da0:sym0:0:0:0): Unretryable Error da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number AKF03354 da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: Attempt to query device size failed: UNIT ATTENTION, Scsi bus reset occurred sym0:0: ERROR (a0:0) (0-a7-80) (10/9d) @ (scripta 400:f3100000). It's possible that there are hardware problems with this machine or the SCSI card; earlier today it passed all diagnostics, but I just now ran the diagnostics again and all it can say is ``Bus fault''. (But it *was* working when it was last in service.) I'm open to suggestions.... (I'd be happy to run on the internal IDE instead of the Symbios if that can be made to work. I'm told that the CMD646 is much more reasonable than the CMD640 was and shouldn't be too hard to support.) -GAWollman To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-sparc" in the body of the message