Date: Wed, 5 Feb 2003 17:16:35 +0000 From: Andrew Chadwick <andrewc@piffle.org> To: questions@FreeBSD.org Subject: sparc64/sbus: "No disks found" during install/partitioning on Sun Ultra Enterprise 1 Message-ID: <20030205171635.GA7272@piffle.org>
next in thread | raw e-mail | index | archive | help
--ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi there, I get a "No disks found" during the disk partitioning phase of a FreeBSD Standard install using the image at <ftp://ftp.freebsd.org/pub/FreeBSD/ releases/sparc64/ISO-IMAGES/5.0/5.0-RELEASE-sparc64-miniinst.iso> on the office's spare Ultra Enterprise 1. The docs I read at <http://people.freebsd =2Eorg/~bmah/relnotes/5.0-RELEASE/installation-sparc64.html> weren't too=20 useful. This machine contains one old installation of Solaris, FYI, but=20 we don't need to keep that. This would be my first introduction to FreeBSD, so be gentle. Message=20 |No disks found! Please verify that your disk controller is being =20 |properly probed at boot time. See the Hardware Guide on the =20 |Documentation menu for clues on diagnosing this type of problem. =20 [ OK ] =20 Press enter or space=20 HARDWARE.TXT wasn't useful. Invoking Disklabel from the Index (Glossary=20 of functions) menu preoduces the same message. Here's the output of devalias in Open Firmware ------------------------------------- screen /sbus@1f,0/cgsix@2,0 net-aui /sbus/ledma@e,8400010:aui/le@e,8c00000 net-tpe /sbus/ledma@e,8400010:tpe/le@e,8c00000 net /sbus/ledma@e,8400010/le@e,8c00000 disk /sbus/espdma@e,8400000/esp@e,8800000/sd@0,0 cdrom /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f tape /sbus/espdma@e,8400000/esp@e,8800000/st@4,0 tape1 /sbus/espdma@e,8400000/esp@e,8800000/st@5,0 tape0 /sbus/espdma@e,8400000/esp@e,8800000/st@4,0 disk6 /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0 disk5 /sbus/espdma@e,8400000/esp@e,8800000/sd@5,0 disk4 /sbus/espdma@e,8400000/esp@e,8800000/sd@4,0 disk3 /sbus/espdma@e,8400000/esp@e,8800000/sd@3,0 disk2 /sbus/espdma@e,8400000/esp@e,8800000/sd@2,0 disk1 /sbus/espdma@e,8400000/esp@e,8800000/sd@1,0 disk0 /sbus/espdma@e,8400000/esp@e,8800000/sd@0,0 scsi /sbus/espdma@e,8400000/esp@e,8800000 floppy /sbus/SUNW,fdtwo ttyb /sbus/zs@f,1100000:b ttya /sbus/zs@f,1100000:a keyboard! /sbus/zs@f,1000000:forcemode keyboard /sbus/zs@f,1000000 name aliases ---------------- The output from probe-scsi-all: --------------------------- /sbus@1f,0/espdma@e,8400000/esp@e,8800000 Target 0=20 Unit 0 Disk IBM DCAS32160SUN2.1GS65A Target 1=20 Unit 0 Disk IBM DCAS32160SUN2.1GS65A Target 6=20 Unit 0 Removable Read Only device NEC CD-ROM DRIVE:5022.0y ---------------------------- And the output from the install CD's boot sequence: ------------------------------------------------------------------------ Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f File and=20 args:=20 =20 >> FreeBSD/sparc64 boot block Boot path: /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:f Boot loader: /boot/loader Console: OpenFirmware console Boot path set to /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:a FreeBSD/sparc64 bootstrap loader, Revision 1.0 (scottl@numenor.btc.adaptec.com, Thu Jan 16 07:21:26 MST 2003) bootpath=3D"/sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:a" Loading /boot/defaults/loader.conf=20 /boot/kernel/kernel data=3D0x312c08+0xe77b8 syms=3D[0x8+0x49890+0x8+0x38cf5] | Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... =20 nothing to autoload yet. jumping to kernel entry at 0xc0038000. stray vector interrupt 2033 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE #0: Fri Jan 17 20:03:38 GMT 2003 root@numenor.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0880000. Preloaded mfs_root "/boot/mfsroot" at 0xc0880190. Timecounter "tick" frequency 166982390 Hz cpu0: Sun Microsystems UltraSparc-I Processor (166.98 MHz CPU) Model: SUNW,Ultra-1 Initializing GEOMetry subsystem md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc047c958 nexus0: <OpenFirmware Nexus device> sbus0: clock 25.000 MHz DVMA map: 0xff800000 to 0xffffffff initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz sbus0: <U2S UPA-SBus bridge> on nexus0 sbus0: <SUNW,CS4231>, type (unknown) (no driver attached) sbus0: <auxio>, type (unknown) (no driver attached) sbus0: <flashprom>, type (unknown) (no driver attached) sbus0: <SUNW,fdtwo>, type block (no driver attached) eeprom0: <SBus EEPROM/clock> mem 0x1200000-0x1201fff on sbus0 eeprom0: model mk48t59 eeprom0: hostid 808898c3 sbus0: <zs>, type serial (no driver attached) sbus0: <zs>, type serial (no driver attached) sbus0: <sc>, type (unknown) (no driver attached) sbus0: <SUNW,pll>, type (unknown) (no driver attached) sbus0: <espdma>, type (unknown) (no driver attached) sbus0: <ledma>, type (unknown) (no driver attached) sbus0: <SUNW,bpp>, type (unknown) (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem=20 0x8c07000-0x8c0701f,0x8c06000-0x8c07fff,0x8c04000-0x8c05fff,0x8c02000-0x8c0= 3fff,0x8c00000-0x8c0 0107 irq 1988 on sbus0 hme0: Ethernet address: 08:00:20:88:98:c3 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sbus0: <cgsix>, type display (no driver attached) Timecounters tick every 10.000 msec Mounting root from ufs:/dev/md0 Invalid time in real time clock. Check and reset the date immediately! /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5) 2 ------------------------------------ Am I missing anything here? --=20 Andrew Chadwick <Secure beneath the watchful eyes> --ew6BAiZeqk4r7MaW Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (GNU/Linux) iD8DBQE+QUbzo3CEnCcHJXcRAvNoAJ0fE857H74XjbIH1L5Eb4K3+oW/fACgk7kg QkbaQurA9IfiJWCsUl2tFvI= =bow7 -----END PGP SIGNATURE----- --ew6BAiZeqk4r7MaW-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030205171635.GA7272>