Skip site navigation (1)Skip section navigation (2)
From:      "Will Downs" <will.downs@telus.com>
To:        <freebsd-questions@FreeBSD.ORG>
Subject:   Error compiling kernel - ioconf.o : Undefined symbol
Message-ID:  <000001be5c8b$b182c720$da4a800a@win98.techzone.cx>

Next in thread | Raw E-Mail | Index | Archive | Help
Thanks in advance for help me.

This is my first time configuring a kernel. I get this error when I'm
running "make" .
Has anybody ran into this error before?

________
loading kernel
ioconf.o: Undefined symbol `_ieintr' referenced from data segment
*** Error code 1

Stop.


Thanks again.

Here is my kernel configuration file

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#       $Id: GENERIC,v 1.77.2.25 1998/07/20 20:11:04 msmith Exp $

machine         "i386"
#cpu            "I386_CPU"
cpu             "I486_CPU"
#cpu            "I586_CPU"
#cpu            "I686_CPU"
ident           ORBIT
maxusers        15

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
#options                NFS                     #Network Filesystem
#options                MSDOSFS                 #MSDOS Filesystem
#options                "CD9660"                #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         "COMPAT_43"             #Compatible with BSD 4.3 [KEEP
THIS!]
#options                SCSI_DELAY=15           #Be pessimistic about Joe
SCSI device
options         BOUNCE_BUFFERS          #include support for DMA bounce
buffers
options         UCONSOLE                #Allow users to grab the console
options         FAILSAFE                #Be conservative
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         QUOTA
config          kernel  root on wd0

controller      isa0
controller      eisa0
#controller     pci0

#controller     fdc0    at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
#disk           fd0     at fdc0 drive 0
#disk           fd1     at fdc0 drive 1
# Unless you know very well what you're doing, leave ft0 at drive 2, or
# remove the line entirely if you don't need it.  Trying to configure
# it on another unit might cause surprises, see PR kern/7176.
#tape           ft0     at fdc0 drive 2


options         "CMD640"        # work around CMD640 chip deficiency
controller      wdc0    at isa? port "IO_WD1" bio irq 14 vector wdintr
disk            wd0     at wdc0 drive 0
#disk           wd1     at wdc0 drive 1

#controller     wdc1    at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk           wd2     at wdc1 drive 0
#disk           wd3     at wdc1 drive 1

#options                ATAPI           #Enable ATAPI support for IDE bus
#options                ATAPI_STATIC    #Don't do it as an LKM
#device         wcd0            #IDE CD-ROM
#device         wfd0            #IDE floppy (LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.

#controller     ncr0
#controller     amd0
#controller     ahb0
#controller     ahc0
#controller     dpt0
#controller     bt0     at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller     uha0    at isa? port "IO_UHA0" bio irq ? drq 5 vector
uhaintr
#controller     aha0    at isa? port "IO_AHA0" bio irq ? drq 5 vector
ahaintr
#controller     aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller     nca0    at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller     nca1    at isa? port 0x350 bio irq 5 vector ncaintr
#controller     sea0    at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector
seaintr

options                 DPT_MEASURE_PERFORMANCE # Required by DPT driver??
#options                DPT_VERIFY_HINTR        # Some hardware must have
it!
#options                DPT_TRACK_CCB_STATES    # Some hardware must have
it!
#options                DPT_HANDLE_TIMEOUTS     # Some hardware must have
it!
#options                DPT_TIMEOUT_FACTOR=4    # Some hardware needs more

#controller     scbus0

#device         sd0

#device         od0     #See LINT for possible `od' options.

#device         st0

#device         cd0     #Only need one of these, the code dynamically grows

#device         wt0     at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device         mcd0    at isa? port 0x300 bio irq 10 vector mcdintr

#controller     matcd0  at isa? port 0x230 bio

#device         scd0    at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
device          vt0     at isa? port "IO_KBD" tty irq 1 vector pcrint
#options                XSERVER                 # support for X server
#options                FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options                PCVT_SCANSET=2          # IBM keyboards are non-std

# Mandatory, don't remove
device          npx0    at isa? port "IO_NPX" flags 0x1 irq 13 vector
npxintr

#
# Laptop support (see LINT for more options)
#
#device         apm0    at isa? disable # Advanced Power Management
#options                APM_BROKEN_STATCLOCK    # Workaround some buggy APM
BIOS
# PCCARD (PCMCIA) support
#controller     card0
#device         pcic0   at card?
#device         pcic1   at card?

#device         sio0    at isa? port "IO_COM1" tty irq 4 vector siointr
#device         sio1    at isa? port "IO_COM2" tty irq 3 vector
siointr#device         sio2    at isa? disable port "IO_COM3" tty irq 5
vector siointr
#device         sio3    at isa? disable port "IO_COM4" tty irq 9 vector
siointr

#device         lpt0    at isa? port? tty irq 7 vector lptintr
#device         lpt1    at isa? port? tty
#device         mse0    at isa? port 0x23c tty irq 5 vector mseintr

#device         psm0    at isa? port "IO_KBD" conflicts tty irq 12 vector
psmintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device tx0
#device vx0

device ed0 at isa? port 0x320 net irq 10 iomem 0xd8000 vector edintr
device ed0 at isa? port 0x340 net irq 11 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ex0 at isa? port? net irq? vector exintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
#device cs0 at isa? disable port 0x300 net irq ? vector csintr

pseudo-device   loop
pseudo-device   ether
pseudo-device   log
#pseudo-device  sl      1
#pseudo-device  ppp     1
#pseudo-device  vn      1
#pseudo-device  tun     1
pseudo-device   pty     16
pseudo-device   gzip            # Exec gzipped a.out's
pseudo-device   snp     1
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options         KTRACE          #kernel tracing

# This provides support for System V shared memory.
#
#options         SYSVSHM
options          SYSVSEM
options          SYSVMSG
# fire wall options
options         IPFIREWALL
options         IPFIREWALL_VERBOSE



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001be5c8b$b182c720$da4a800a>